LED Matrix Backpack v1.1
author: pierreca
2 layer board of 1.26 x 1.26 inches (32.0 x 31.9 mm)
Uploaded:
February 08, 2015
Shared:
February 08, 2015
Total Price:
$7.90
PCB hooking up a MAX7219 (or AS1100PL) with an NFM-12883 LED Matrix
PCB hooking up a MAX7219 (or AS1100PL) with an NFM-12883 LED Matrix
SPIFlashBoard.v01
author: PeskyProducts
2 layer board of 0.71 x 0.31 inches (17.9 x 7.8 mm)
Uploaded:
February 08, 2015
Shared:
February 08, 2015
Total Price:
$1.05
Appallingly small Teensy 3.x add-on board with 16 Mbytes of fast serial flash memory using an SPI communications interface. Pin out and 5 mm x 6 mm WSON package common to Spansion and Winbond flash chips so either can be used. Board mounts onto the non-USB end of Teensy 3.x or Teensy-LC.
Appallingly small Teensy 3.x add-on board with 16 Mbytes of fast serial flash memory using an SPI communications interface. Pin out and 5 mm x 6 mm WSON package common to Spansion and Winbond flash chips so either can be used. Board mounts onto the non-USB end of Teensy 3.x or Teensy-LC.
VoCore Motor Shield
author: sir066
2 layer board of 1.01 x 1.01 inches (25.7 x 25.7 mm)
Uploaded:
February 07, 2015
Shared:
February 07, 2015
Total Price:
$5.10
Connection shield for using Pololu DRV8835 Dual Motor Driver Carrier and S7V7F5 Voltage Regulator with VoCore coin-size computer
http://vocore.io/
https://www.pololu.com/product/2135
https://www.pololu.com/product/2119
https://github.com/sir66/VoCore-Motor-Shield
Connection shield for using Pololu DRV8835 Dual Motor Driver Carrier and S7V7F5 Voltage Regulator with VoCore coin-size computer
http://vocore.io/
https://www.pololu.com/product/2135
https://www.pololu.com/product/2119
https://github.com/sir66/VoCore-Motor-Shield
MAX471 based current meter
author: sir066
2 layer board of 0.99 x 0.60 inches (25.1 x 15.2 mm)
Uploaded:
February 07, 2015
Shared:
February 07, 2015
Total Price:
$2.95
Very simple MAX471 based board for battery charge and discharge monitoring (version 1.2). Includes resistive voltage divider.
Very simple MAX471 based board for battery charge and discharge monitoring (version 1.2). Includes resistive voltage divider.
afromini hex brushed esc
author: KoekieMonster
2 layer board of 0.61 x 0.48 inches (15.6 x 12.1 mm)
Uploaded:
February 07, 2015
Shared:
February 07, 2015
Total Price:
$1.45
afromini hex brushed esc
ONLY WORKS WITH REV 0 or REV 1. NOT WITH REV 3. if you need this for revision 3 please send a PM to KoekieMonster @ rcgroups.com, then I'll draw it.
afromini hex brushed esc
ONLY WORKS WITH REV 0 or REV 1. NOT WITH REV 3. if you need this for revision 3 please send a PM to KoekieMonster @ rcgroups.com, then I'll draw it.
serial-isolator
author: Kingswood
2 layer board of 0.80 x 0.40 inches (20.3 x 10.2 mm)
Uploaded:
February 07, 2015
Shared:
February 07, 2015
Total Price:
$1.60
High speed optocoupler isolator for 3V serial port.
Optocoupler is Avago ACPL-M21L SO5, resistors 470R, capacitors 100n.
High speed optocoupler isolator for 3V serial port.
Optocoupler is Avago ACPL-M21L SO5, resistors 470R, capacitors 100n.
RYO_TC2050-ARM2010
author: igrokspock
2 layer board of 1.22 x 0.68 inches (31.0 x 17.2 mm)
Uploaded:
February 07, 2015
Shared:
February 07, 2015
Total Price:
$4.10
"Roll your own" Tag-Connect ARM2010 SAMICE Adapter…
"Roll your own" Tag-Connect ARM2010 SAMICE Adapter…
Zero Tiny BLE V2.0
author: micahpearlman
2 layer board of 0.79 x 1.85 inches (20.0 x 47.0 mm)
Uploaded:
February 02, 2015
Shared:
February 06, 2015
Total Price:
$7.25
First production run of Zero Tiny BLE
First production run of Zero Tiny BLE
