ISP Dual SOIC 8 Breakout
author: Funman1
2 layer board of 0.77 x 1.62 inches (19.5 x 41.1 mm)
Uploaded:
March 02, 2015
Shared:
March 16, 2015
Total Price:
$6.15
ISP Dual SOIC 8 Breakout for Attiny 85 Works with SMT Test Socket - Medium SOIC-8 From Adafruit. https://www.adafruit.com/products/1796
ISP Dual SOIC 8 Breakout for Attiny 85 Works with SMT Test Socket - Medium SOIC-8 From Adafruit. https://www.adafruit.com/products/1796
REDOUBLER v0.3
author: alwynallan
2 layer board of 1.25 x 0.53 inches (31.8 x 13.4 mm)
Uploaded:
March 15, 2015
Shared:
March 15, 2015
Total Price:
$3.25
Open RNG Had to add 3.3V regulator. Moved programming pads to bottom to make space.
Open RNG Had to add 3.3V regulator. Moved programming pads to bottom to make space.
DSPICable-44-V099
author: yerazunis
2 layer board of 2.56 x 3.94 inches (65.0 x 100.0 mm)
Uploaded:
March 15, 2015
Shared:
March 15, 2015
Total Price:
$50.35
DSP board for FM Ogre & other applications - it's set up to use modular synthesizer voltage levels, but it's really a general purpose dsPIC board for dsPIC33FJ128GP804 and similar DSPICs with integrated A/D and D/A's
DSP board for FM Ogre & other applications - it's set up to use modular synthesizer voltage levels, but it's really a general purpose dsPIC board for dsPIC33FJ128GP804 and similar DSPICs with integrated A/D and D/A's
max31855 thermocouple breakout
author: Crusader68
2 layer board of 0.80 x 0.90 inches (20.4 x 22.9 mm)
Uploaded:
February 08, 2015
Shared:
March 15, 2015
Total Price:
$3.60
type k thermocouple board for max31855
type k thermocouple board for max31855
usb host shield
author: Crusader68
2 layer board of 1.50 x 0.70 inches (38.1 x 17.8 mm)
Uploaded:
March 15, 2015
Shared:
March 15, 2015
Total Price:
$5.20
for arduino pro mini
for arduino pro mini
ShapeOko 2 - Limit Switch - Main Board
author: afterhoursengineering
2 layer board of 5.00 x 1.10 inches (127.0 x 28.0 mm)
Uploaded:
March 15, 2015
Shared:
March 15, 2015
Total Price:
$27.50
This is an interface board that works with the Hall Effect Sensor Board to communicate with the Shapeoko 2 Arduino Board's end stops/homing inputs.
This is an interface board that works with the Hall Effect Sensor Board to communicate with the Shapeoko 2 Arduino Board's end stops/homing inputs.
ESPkit-01 Version 1.1
author: mage0r
2 layer board of 0.79 x 0.99 inches (20.1 x 25.1 mm)
Uploaded:
March 15, 2015
Shared:
March 15, 2015
Total Price:
$3.90
ESP-01 learning board. Check out https://github.com/mage0r/ESPkit-01 and https://github.com/geekscape/nodemcu_esp8266 for more info!
ESP-01 learning board. Check out https://github.com/mage0r/ESPkit-01 and https://github.com/geekscape/nodemcu_esp8266 for more info!
Fuzz Rite
author: culturejam
2 layer board of 1.14 x 0.91 inches (28.9 x 23.1 mm)
Uploaded:
January 21, 2014
Shared:
March 15, 2015
Total Price:
$5.15
Silicon Fuzz Rite. Schematic: https://db.tt/PiJ9SNxh
Silicon Fuzz Rite. Schematic: https://db.tt/PiJ9SNxh
DCMotorController.v02
author: PeskyProducts
2 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded:
March 15, 2015
Shared:
March 15, 2015
Total Price:
$2.10
Updated DC brushed motor controller intended as an add-on for Teensy 3.x. TI's CSD13383F4 FemtoFets replace the SOT-23 PMV31XN MOSFETS and Comchip's CDSQR4148-HF high-speed switching diodes replace the SOD-323 1N4148 diodes of the previous board. The new components are super small, and I made th…
Show full description
Updated DC brushed motor controller intended as an add-on for Teensy 3.x. TI's CSD13383F4 FemtoFets replace the SOT-23 PMV31XN MOSFETS and Comchip's CDSQR4148-HF high-speed switching diodes replace the SOD-323 1N4148 diodes of the previous board. The new components are super small, and I made th…
Show full description
SharpMemoryDisplay.v03
author: PeskyProducts
2 layer board of 1.38 x 0.71 inches (35.1 x 17.9 mm)
Uploaded:
March 14, 2015
Shared:
March 14, 2015
Total Price:
$4.85
Sharp 1.17-inch, 38 x 184 pixel TFT-LCD display as an add-on to Teensy 3.1. Display requires no more than 130 microamps so it can be powered via digitalWrite(HIGH) from any Teensy GPIO pin. This display can be mounted on a breadboard or, soldered or with female headers, mounted directly onto a Te…
Show full description
Sharp 1.17-inch, 38 x 184 pixel TFT-LCD display as an add-on to Teensy 3.1. Display requires no more than 130 microamps so it can be powered via digitalWrite(HIGH) from any Teensy GPIO pin. This display can be mounted on a breadboard or, soldered or with female headers, mounted directly onto a Te…
Show full description
LED Controller Board V1.0 - 20141007
author: JamesStokebrand
2 layer board of 6.02 x 2.02 inches (152.8 x 51.2 mm)
Uploaded:
October 07, 2014
Shared:
March 14, 2015
Total Price:
$60.65
RGB LED Controller board using an XBee chip to communicate to RGB LED nodes.
RGB LED Controller board using an XBee chip to communicate to RGB LED nodes.
LED Node Board V1.1 - 20141122
author: JamesStokebrand
2 layer board of 5.42 x 2.02 inches (137.6 x 51.2 mm)
Uploaded:
November 23, 2014
Shared:
March 14, 2015
Total Price:
$54.60
RGB LED Node board accepts commands over XBee from the RGB LED Controller board.
RGB LED Node board accepts commands over XBee from the RGB LED Controller board.
Encoder
author: lukeweston
2 layer board of 2.28 x 1.14 inches (57.8 x 28.9 mm)
Uploaded:
March 13, 2015
Shared:
March 14, 2015
Total Price:
$12.95
TD1208 Breakout board
author: StephaneD
2 layer board of 1.36 x 0.82 inches (34.5 x 20.8 mm)
Uploaded:
February 17, 2015
Shared:
March 14, 2015
Total Price:
$5.55
Sigfox modem 3.3V Github Link
Sigfox modem 3.3V Github Link
