Shared Projects by ALKR

Shared Projects by ALKR

NeoPixel_HD_rev0

Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.9 x 22.9 mm)
Uploaded: January 23rd 2021
Shared: January 23rd 2021
Total Price: $9.00

More information here: https://hackaday.io/project/168448

More information here: https://hackaday.io/project/168448

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Permalink Embed link
Embeddable link to order this shared Project

ch552G .kicad_pcb

Top
Bottom

2 layer board of 0.62 x 1.07 inches (15.7 x 27.0 mm)
Uploaded: May 3rd 2020
Shared: December 16th 2020
Total Price: $3.25

use on our own Risk. Mostly untested. Licences CC BY-NC-SA 4.0

use on our own Risk. Mostly untested. Licences CC BY-NC-SA 4.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Permalink Embed link
Embeddable link to order this shared Project

copxie.kicad_pcb

Top
Bottom

2 layer board of 0.81 x 1.37 inches (20.6 x 34.9 mm)
Uploaded: August 15th 2020
Shared: October 22nd 2020
Total Price: $5.55

More Information here: https://hackaday.io/project/174310 Image of an assembled after Dark PCB from OSH-Park here: https://twitter.com/tinyledmatrix/status/…

More Information here: https://hackaday.io/project/174310 Image of an assembled after Dark PCB from OSH-Park here: https://twitter.com/tinyledmatrix/status/…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Permalink Embed link
Embeddable link to order this shared Project

batterySaverBadge rev0

Top
Bottom

2 layer board of 0.71 x 1.54 inches (18.0 x 39.0 mm)
Uploaded: March 17th 2019
Shared: March 17th 2019
Total Price: $5.40

DESIGN IS NOT YET VERIFIED - COULD BE NON WORKING

get more from your CR2032 batteries More Information on hackaday.io: https://hackaday.io/project/164…

DESIGN IS NOT YET VERIFIED - COULD BE NON WORKING

get more from your CR2032 batteries More Information on hackaday.io: https://hackaday.io/project/164…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

rev0_0402_2lay_better LED_Footprint.brd

Top
Bottom

2 layer board of 0.32 x 0.50 inches (8.0 x 12.6 mm)
Uploaded: October 15th 2017
Shared: August 31st 2018
Total Price: $0.75

more LED matrix stuff. Optimized for real production
nearly same as rev2 on the github (sorry messed up the revision number here) See https://hackaday.i…

more LED matrix stuff. Optimized for real production
nearly same as rev2 on the github (sorry messed up the revision number here) See https://hackaday.i…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white