Power on/low battery indicator V3
author: Mooper
2 layer board of 0.45 x 0.38 inches (11.4 x 9.7 mm)
Uploaded:
February 29, 2016
Shared:
February 29, 2016
Total Price:
$0.85
Based on daftmike’s low battery indicator mk2.
Parts list: <http://www.digikey.com/short/335zvz>
Based on daftmike’s low battery indicator mk2.
Parts list: <http://www.digikey.com/short/335zvz>
Power on/low battery indicator V2
author: Mooper
2 layer board of 0.56 x 0.51 inches (14.1 x 12.9 mm)
Uploaded:
February 29, 2016
Shared:
February 29, 2016
Total Price:
$1.40
Based on daftmike’s low battery indicator mk2.
Parts list: <http://www.digikey.com/short/335zwm>
Based on daftmike’s low battery indicator mk2.
Parts list: <http://www.digikey.com/short/335zwm>
ATtiny10 Mini Breakout
author: SyncChannelBlog
2 layer board of 0.33 x 0.25 inches (8.3 x 6.4 mm)
Uploaded:
February 28, 2016
Shared:
February 29, 2016
Total Price:
$0.40
<http://syncchannel.blogspot.com/2016/02/attiny10-mini-breakout-board.html>
<http://syncchannel.blogspot.com/2016/02/attiny10-mini-breakout-board.html>
ATtiny10 Mini Breakout Landing Pad
author: SyncChannelBlog
2 layer board of 0.90 x 0.90 inches (22.9 x 22.9 mm)
Uploaded:
February 28, 2016
Shared:
February 29, 2016
Total Price:
$4.05
<http://syncchannel.blogspot.com/2016/02/attiny10-mini-breakout-board.html>
<http://syncchannel.blogspot.com/2016/02/attiny10-mini-breakout-board.html>
esp2ftdi
author: bc547
2 layer board of 0.76 x 0.74 inches (19.2 x 18.7 mm)
Uploaded:
February 28, 2016
Shared:
February 28, 2016
Total Price:
$2.75
ESP8266 (with esp-link firmware) to arduino pro mini serial ftdi connector.
ESP8266 (with esp-link firmware) to arduino pro mini serial ftdi connector.
stm32-boardtoaster
author: dword1511
2 layer board of 1.28 x 0.60 inches (32.5 x 15.3 mm)
Uploaded:
February 03, 2016
Shared:
February 28, 2016
Total Price:
$3.80
STM32F042F6P6 module for bread board.
NOTE: hard to solder. For experienced users only, or consider using hot air gun.
Uses Molex 0473461001 Micro USB and WE 436351045816 push button. Works with SOT23-5 LDO that does not require bypass: AP2112, LP5907, MIC5301, etc.
![Suggested Assem…
Show full description
STM32F042F6P6 module for bread board.
NOTE: hard to solder. For experienced users only, or consider using hot air gun.
Uses Molex 0473461001 Micro USB and WE 436351045816 push button. Works with SOT23-5 LDO that does not require bypass: AP2112, LP5907, MIC5301, etc.
![Suggested Assem…
Show full description
EEVblog PCB Ruler Rev2
author: VirtualInsanity
2 layer board of 7.01 x 0.85 inches (178.1 x 21.5 mm)
Uploaded:
February 25, 2016
Shared:
February 28, 2016
Total Price:
$29.65
PCB ruler thanks to Dave Jones @ EEVblog.com
PCB ruler thanks to Dave Jones @ EEVblog.com
TCS MRF24J40MA Demo
author: TheCurrentSource
2 layer board of 2.80 x 0.94 inches (71.1 x 23.8 mm)
Uploaded:
February 28, 2016
Shared:
February 28, 2016
Total Price:
$13.10
TCS Microchip Wireless Demo
TCS Microchip Wireless Demo
TCS Wireless
author: TheCurrentSource
2 layer board of 2.48 x 1.26 inches (62.9 x 32.1 mm)
Uploaded:
January 15, 2016
Shared:
February 28, 2016
Total Price:
$15.60
TCS Wireless LiPo Charger
TCS Wireless LiPo Charger
Easyracelaptimer PDB
author: RCFun_Flight
2 layer board of 1.42 x 1.42 inches (36.1 x 36.1 mm)
Uploaded:
February 28, 2016
Shared:
February 28, 2016
Total Price:
$10.10
Polulu D24V5F5
ATTiny85 SOP8
MMBT2222A
10 Ohm 0805 Resistor
2 – 330 Ohm 0805 Resistor
LED 0805
2 – Infrared LED TSUS5202
Polulu D24V5F5
ATTiny85 SOP8
MMBT2222A
10 Ohm 0805 Resistor
2 – 330 Ohm 0805 Resistor
LED 0805
2 – Infrared LED TSUS5202
Padawan Shield (Jacked BY8001)
author: JoyMonkey
2 layer board of 2.04 x 2.28 inches (51.8 x 57.8 mm)
Uploaded:
February 27, 2016
Shared:
February 27, 2016
Total Price:
$23.20
OLD VERSION , NEEDS SOME WORK
Arduino shield with two sockets for BY8001 audio modules, breakouts for wireless PS2 receiver and motor controllers, a hefty 5V regulator.
Big thanks to Ron for pointing me to the BY8001 modules!
OLD VERSION , NEEDS SOME WORK
Arduino shield with two sockets for BY8001 audio modules, breakouts for wireless PS2 receiver and motor controllers, a hefty 5V regulator.
Big thanks to Ron for pointing me to the BY8001 modules!