rpi-6lowpan-adapter
author: tijuca
2 layer board of 2.33 x 1.38 inches (59.2 x 35.0 mm)
Uploaded:
July 31, 2015
Shared:
February 21, 2016
Total Price:
$16.05
Adapter PCB to use AT86RF233 and TI CC2520 on the RPi (v1 and v2) at the same time.
Adapter PCB to use AT86RF233 and TI CC2520 on the RPi (v1 and v2) at the same time.
NEDONAND-2
author: Shaos
2 layer board of 3.39 x 2.20 inches (86.1 x 55.9 mm)
Uploaded:
January 21, 2016
Shared:
February 21, 2016
Total Price:
$37.25
2nd board for NEDONAND project
It's dual edge triggered D-flipflop with separate reset inputs. Pins description (from right to left):
1) GND - ground;
2) D1 - first data input;
3) ^C1 - first clock input (front active);
4) /R1 - first reset input;
5) Q1 - first strai...
Show full description
2nd board for NEDONAND project
It's dual edge triggered D-flipflop with separate reset inputs. Pins description (from right to left):
1) GND - ground;
2) D1 - first data input;
3) ^C1 - first clock input (front active);
4) /R1 - first reset input;
5) Q1 - first strai...
Show full description
NEDONAND-1
author: Shaos
2 layer board of 3.39 x 1.40 inches (86.1 x 35.6 mm)
Uploaded:
January 15, 2016
Shared:
February 21, 2016
Total Price:
$23.70
1st board for NEDONAND project
This is a 1-bit slice of NEDONAND ALU supporting shift right RRC (000), shift left RLC (001), NAND (010), XOR (011) and ADD (1xx) operations. Pins description:
1) GND - ground;
2) O0 - bit 0 of ALU operation;
3) O1 - bit 1 of ALU operation;
...
Show full description
1st board for NEDONAND project
This is a 1-bit slice of NEDONAND ALU supporting shift right RRC (000), shift left RLC (001), NAND (010), XOR (011) and ADD (1xx) operations. Pins description:
1) GND - ground;
2) O0 - bit 0 of ALU operation;
3) O1 - bit 1 of ALU operation;
...
Show full description
[do not order] 17mm DD + single 7135 v030
author: Red
2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded:
February 20, 2016
Shared:
February 20, 2016
Total Price:
$2.20
Do not order. Replaced with v031.
Forum thread: http://budgetlightforum.com/node/36710
Do not order. Replaced with v031.
Forum thread: http://budgetlightforum.com/node/36710
SpaXbooster des FremoDCC
author: Micha59
2 layer board of 2.05 x 3.94 inches (52.1 x 100.0 mm)
Uploaded:
January 28, 2016
Shared:
February 20, 2016
Total Price:
$40.35
Updated SpaxBooster with the changes for Sound, see SpaXbooster / SHMDBoost Version 4. For the additional capacitor see the hints at the end of this site. On th…
Show full description
Updated SpaxBooster with the changes for Sound, see SpaXbooster / SHMDBoost Version 4. For the additional capacitor see the hints at the end of this site. On th…
Show full description
ESP-Furnacev1.2 (Untested)
author: bondjames12
2 layer board of 2.00 x 1.81 inches (50.8 x 46.0 mm)
Uploaded:
February 20, 2016
Shared:
February 20, 2016
Total Price:
$18.10
Smaller size. Added more resistors to prevent overcurrent.
Smaller size. Added more resistors to prevent overcurrent.
Seven Segment Display Module 1.1.0
author: tardate
2 layer board of 1.86 x 1.31 inches (47.1 x 33.2 mm)
Uploaded:
February 20, 2016
Shared:
February 20, 2016
Total Price:
$12.10
A 7-segment display module with shift register interface. This is my version of project 2 from the KiCad like a Pro course from Tech Explorations. See [tardate/LittleArduinoProjects](https://github.com/tardate/LittleArduinoProjects/tree/master/playground/LED…
Show full description
A 7-segment display module with shift register interface. This is my version of project 2 from the KiCad like a Pro course from Tech Explorations. See [tardate/LittleArduinoProjects](https://github.com/tardate/LittleArduinoProjects/tree/master/playground/LED…
Show full description
GOLDeRack Indicator GSE
author: JohnJaniczek
2 layer board of 3.50 x 2.10 inches (88.9 x 53.4 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$36.75
28V Indicator, 2 Layer Board
28V Indicator, 2 Layer Board
Connector Board 2
author: FrankB
2 layer board of 0.70 x 1.00 inches (17.7 x 25.3 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$3.45
New v2 without vias
Photos and description from Version 1:
License
Creative Commons Attribution-ShareAlike 4.0 International License
New v2 without vias
Photos and description from Version 1:
License
Creative Commons Attribution-ShareAlike 4.0 International License
Kingbright LED breakout
author: infovore
2 layer board of 1.26 x 1.22 inches (32.0 x 31.0 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$7.65
A simple breakout board for a 10-LED Kingbright LED module.
Open Hardware: shared as CC-BY-SA.
A simple breakout board for a 10-LED Kingbright LED module.
Open Hardware: shared as CC-BY-SA.
LCD i2c adapter
author: ARS-W4ISH
2 layer board of 1.95 x 1.04 inches (49.5 x 26.3 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$10.10
ic2 adapter for LCD Display. Fits on back of LCD, and uses all Thru-hole components. MCP23008
ic2 adapter for LCD Display. Fits on back of LCD, and uses all Thru-hole components. MCP23008
Teensy LC BOB v1.2
author: raster
2 layer board of 1.54 x 2.50 inches (39.2 x 63.5 mm)
Uploaded:
February 03, 2016
Shared:
February 19, 2016
Total Price:
$19.25
Teensy LC BOB is a breakout board for the Teensy LC microcontroller that allows you to use screw terminals to attach things.
Teensy LC BOB is a breakout board for the Teensy LC microcontroller that allows you to use screw terminals to attach things.
4xAPA106 Board
author: tuzzio
2 layer board of 0.25 x 5.00 inches (6.4 x 127.0 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$6.25
Third version of a board I'll be using to make a large grid of APA106 RGB LEDs. The last two versions used one board per LED; this version has four LEDs per board. This should allow for much faster and easier construction of large grids, and less dependence on accurately cut & stripped wiring t…
Show full description
Third version of a board I'll be using to make a large grid of APA106 RGB LEDs. The last two versions used one board per LED; this version has four LEDs per board. This should allow for much faster and easier construction of large grids, and less dependence on accurately cut & stripped wiring t…
Show full description
ORCA Control Board
author: Hughes.steven
2 layer board of 2.27 x 4.43 inches (57.5 x 112.5 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$50.15
Control Board 0.22
Control Board 0.22
ORCA Power Board
author: Hughes.steven
2 layer board of 2.27 x 4.43 inches (57.5 x 112.5 mm)
Uploaded:
February 19, 2016
Shared:
February 19, 2016
Total Price:
$50.15
Power Board 0.22
Power Board 0.22
