Shared Projects

Shared Projects

15362^0

author: epccs
Top
Bottom

2 layer board of 0.90 x 0.55 inches (22.9 x 14.0 mm)
Uploaded: January 07, 2016
Shared: February 13, 2016
Total Price: $2.45

HT

This simple circuit transmits a 3mA or 10mA current loop value as a pulse, it is controlled with the venerable 555 timer connected to a capacitive moisture sensor and a thermistor. The current loop flows in a CAT5 pair that provides well-known transmission line effects and superior noise …

Show full description

HT

This simple circuit transmits a 3mA or 10mA current loop value as a pulse, it is controlled with the venerable 555 timer connected to a capacitive moisture sensor and a thermistor. The current loop flows in a CAT5 pair that provides well-known transmission line effects and superior noise …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Greenhouse Sensor Module

author: jeffrobots
Top
Bottom

2 layer board of 2.21 x 2.01 inches (56.0 x 51.0 mm)
Uploaded: February 13, 2016
Shared: February 13, 2016
Total Price: $22.10

I2C greenhouse sensor

I2C greenhouse sensor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jModule

author: cvanandel
Top
Bottom

2 layer board of 0.71 x 0.91 inches (18.1 x 23.1 mm)
Uploaded: February 12, 2016
Shared: February 12, 2016
Total Price: $3.20

Interface Board beween a Aduino Mini Pro and a NRF24L01

Interface Board beween a Aduino Mini Pro and a NRF24L01

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Curve tracer

author: slightlyNybbled
Top
Bottom

2 layer board of 1.11 x 1.51 inches (28.1 x 38.2 mm)
Uploaded: February 04, 2016
Shared: February 12, 2016
Total Price: $8.30

v0 - depreciated

v0 - depreciated

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3R2 Motor Encoder

author: Microsat
Top
Bottom

2 layer board of 2.11 x 1.20 inches (53.6 x 30.6 mm)
Uploaded: February 12, 2016
Shared: February 12, 2016
Total Price: $12.70

Motor and encoder interfacer

Motor and encoder interfacer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wood Stove Controller

author: NickCook
Top
Bottom

2 layer board of 4.01 x 2.11 inches (101.8 x 53.5 mm)
Uploaded: February 12, 2016
Shared: February 12, 2016
Total Price: $42.20

Arduino Based

Arduino Based

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Powered RS232

author: N.Boers
Top
Bottom

2 layer board of 1.24 x 0.88 inches (31.4 x 22.2 mm)
Uploaded: February 03, 2016
Shared: February 12, 2016
Total Price: $5.40

RS232 to TTL converter powered by micro USB

RS232 to TTL converter powered by micro USB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB Serial

author: N.Boers
Top
Bottom

2 layer board of 1.45 x 0.61 inches (36.7 x 15.4 mm)
Uploaded: February 12, 2016
Shared: February 12, 2016
Total Price: $4.35

Tiny MCP2200 USB to UART

Tiny MCP2200 USB to UART

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wunder Weather Station

author: garyStofer
Top
Bottom

2 layer board of 1.00 x 0.79 inches (25.4 x 20.0 mm)
Uploaded: December 14, 2013
Shared: February 12, 2016
Total Price: $3.90

BaroHygTemp SI Hyg, BoshBMP085

BaroHygTemp SI Hyg, BoshBMP085

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wunder Weather Station

author: garyStofer
Top
Bottom

2 layer board of 0.94 x 1.28 inches (23.9 x 32.5 mm)
Uploaded: February 11, 2016
Shared: February 12, 2016
Total Price: $6.00

RF carrier for Microchip MRF24WB wifi module. Top mount

RF carrier for Microchip MRF24WB wifi module. Top mount

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wunder Weather Station

author: garyStofer
Top
Bottom

2 layer board of 0.94 x 1.33 inches (23.9 x 33.7 mm)
Uploaded: February 11, 2016
Shared: February 12, 2016
Total Price: $6.20

RF carrier for Microchip MRF24WB wifi module. Bottom mount

RF carrier for Microchip MRF24WB wifi module. Bottom mount

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

0805 LED and Resistor

author: HighInBC
Top
Bottom

2 layer board of 0.25 x 0.27 inches (6.4 x 6.9 mm)
Uploaded: August 22, 2015
Shared: February 11, 2016
Total Price: $0.30

0805 LED and Resistor

0805 LED and Resistor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueSaab v3.3a

author: Edison517
Top
Bottom

2 layer board of 2.44 x 2.44 inches (62.0 x 62.0 mm)
Uploaded: February 11, 2016
Shared: February 11, 2016
Total Price: $29.75

Added GND border to top and bottom.

Added GND border to top and bottom.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini PDB v2

author: jrowe88
Top
Bottom

2 layer board of 1.10 x 0.90 inches (28.0 x 22.9 mm)
Uploaded: February 08, 2016
Shared: February 11, 2016
Total Price: $4.95

Mini Power Distribution Board

Mini Power Distribution Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TEST: copy of CHIP_motor_shield

author: fustini
Top
Bottom

2 layer board of 1.63 x 1.99 inches (41.4 x 50.4 mm)
Uploaded: February 11, 2016
Shared: February 11, 2016
Total Price: $16.15

TEST: copy of CHIP_motor_shield by KoljaWindeler https://github.com/KoljaWindeler/CHIP_motor_shield

TEST: copy of CHIP_motor_shield by KoljaWindeler https://github.com/KoljaWindeler/CHIP_motor_shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueSaab v3.3

author: Edison517
Top
Bottom

2 layer board of 2.36 x 2.44 inches (60.0 x 62.0 mm)
Uploaded: February 11, 2016
Shared: February 11, 2016
Total Price: $28.75

Added additional bottom silk screen labels to RN52. MINOR tweak to BT1 and BT2 vias. Added Hardware Rev resistor R13 with R14 (resistor divider network) for possible future use. Added R15 & C10 for outputting pwm power signal to PWREN pin on RN52. Added SMD jumper to short GPIO7 to ground to forc…

Show full description

Added additional bottom silk screen labels to RN52. MINOR tweak to BT1 and BT2 vias. Added Hardware Rev resistor R13 with R14 (resistor divider network) for possible future use. Added R15 & C10 for outputting pwm power signal to PWREN pin on RN52. Added SMD jumper to short GPIO7 to ground to forc…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TEST: copy of CHIP_pwm_shield

author: fustini
Top
Bottom

2 layer board of 1.63 x 1.99 inches (41.4 x 50.4 mm)
Uploaded: February 11, 2016
Shared: February 11, 2016
Total Price: $16.15

TEST: I uploaded CHIP_pwm_shield by KoljaWindeler. simple PWM, mosfet shield to drive led strips with the C.H.I.P. GitHub: https://github.com/KoljaWindeler/CHIP_pwm_shield Forum: https://bbs.nextthing.co/t/salsa-dip-for-c-h-i-p-i2c-arduino-ws2812-pwm-motor/1597/70

TEST: I uploaded CHIP_pwm_shield by KoljaWindeler. simple PWM, mosfet shield to drive led strips with the C.H.I.P. GitHub: https://github.com/KoljaWindeler/CHIP_pwm_shield Forum: https://bbs.nextthing.co/t/salsa-dip-for-c-h-i-p-i2c-arduino-ws2812-pwm-motor/1597/70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IGBT Bridge V1

author: Extreme-Electronics
Top
Bottom

2 layer board of 2.39 x 2.38 inches (60.7 x 60.3 mm)
Uploaded: January 18, 2016
Shared: February 11, 2016
Total Price: $28.35

IGBT Bridge V1 Cockup - Two transistors have heat sink mount in the middle of the board. more details at extelec.uk/brg

IGBT Bridge V1 Cockup - Two transistors have heat sink mount in the middle of the board. more details at extelec.uk/brg

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pad box 1

author: marsabeta
Top
Bottom

2 layer board of 3.23 x 1.73 inches (82.0 x 43.9 mm)
Uploaded: January 31, 2016
Shared: February 11, 2016
Total Price: $27.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

32LQFP-DIP

author: kprice
Top
Bottom

2 layer board of 0.83 x 1.63 inches (21.0 x 41.3 mm)
Uploaded: February 10, 2016
Shared: February 10, 2016
Total Price: $6.70

32 Pin LQFP to DIP Adapter

32 Pin LQFP to DIP Adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy