Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

ESP8285 dev board

author: judge2005
Top
Bottom

2 layer board of 1.01 x 1.71 inches (25.5 x 43.3 mm)
Uploaded: October 27, 2017
Shared: November 16, 2017
Total Price: $8.55

This was an exercise in designing a board that can incorporate a WiFi antenna along with an ESP8285. It breaks out all of the available GPIOs, including GPIO9 and GPIO10. It can be programmed just like an ESP01.

My other project [a USB-UART adapter](https://oshpark.com/shared_projects/LjTzLfRk…

Show full description

This was an exercise in designing a board that can incorporate a WiFi antenna along with an ESP8285. It breaks out all of the available GPIOs, including GPIO9 and GPIO10. It can be programmed just like an ESP01.

My other project [a USB-UART adapter](https://oshpark.com/shared_projects/LjTzLfRk…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MetroWing mkii

author: siddacious
Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.4 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $28.35

An adaptor to use Adafruit Featherwings with Adafruit Metro boards or other Arduino Uno compatible boards

Github repo with BOM

NOTE: This version has a slight interference with the DC jack. The next version will fix this and adjust the featherwing …

Show full description

An adaptor to use Adafruit Featherwings with Adafruit Metro boards or other Arduino Uno compatible boards

Github repo with BOM

NOTE: This version has a slight interference with the DC jack. The next version will fix this and adjust the featherwing …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Inverted FET + n 7135

author: Lexel
Top
Bottom

2 layer board of 0.67 x 0.67 inches (17.1 x 17.1 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $2.25

Pin compatible to FET+1 designs

Pin compatible to FET+1 designs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Game Boy Cartridge Reader Breakout v2

author: AWildTyphlosion
Top
Bottom

2 layer board of 2.25 x 0.84 inches (57.2 x 21.4 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $9.45

A fixed and checked version of my gameboy card reader adapter.

A fixed and checked version of my gameboy card reader adapter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DieBieMS V0.5

author: Ennoid.me
Top
Bottom

4 layer board of 5.52 x 2.37 inches (140.2 x 60.2 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $130.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mixer.brd

author: ingiv
Top
Bottom

2 layer board of 3.59 x 1.50 inches (91.1 x 38.1 mm)
Uploaded: November 14, 2017
Shared: November 16, 2017
Total Price: $26.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINI VESC.kicad_pcb

author: Anton_Chromjak
Top
Bottom

4 layer board of 2.84 x 0.71 inches (72.0 x 18.0 mm)
Uploaded: June 21, 2017
Shared: November 16, 2017
Total Price: $20.10

MINI VESC v0.1

MINI VESC v0.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINI VESC.kicad_pcb

author: Anton_Chromjak
Top
Bottom

4 layer board of 2.84 x 0.71 inches (72.0 x 18.0 mm)
Uploaded: August 16, 2017
Shared: November 16, 2017
Total Price: $20.10

MINI VESC v0.2, [email protected]

MINI VESC v0.2, [email protected]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINI_VESC_ANALOG.kicad_pcb

author: Anton_Chromjak
Top
Bottom

4 layer board of 2.84 x 0.71 inches (72.0 x 18.0 mm)
Uploaded: August 21, 2017
Shared: November 16, 2017
Total Price: $20.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINI VESC 18650 v0.4 .kicad_pcb

author: Anton_Chromjak
Top
Bottom

4 layer board of 2.56 x 0.71 inches (65.0 x 18.0 mm)
Uploaded: September 10, 2017
Shared: November 16, 2017
Total Price: $18.10

VESC 6 mini version. Working. https://github.com/antonchromjak/MINI4 [email protected]

VESC 6 mini version. Working. https://github.com/antonchromjak/MINI4 [email protected]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINI VESC v05.kicad_pcb

author: Anton_Chromjak
Top
Bottom

4 layer board of 2.76 x 0.71 inches (70.0 x 18.0 mm)
Uploaded: September 17, 2017
Shared: November 16, 2017
Total Price: $19.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MINI VESC.kicad_pcb

author: Anton_Chromjak
Top
Bottom

4 layer board of 2.84 x 0.71 inches (72.0 x 18.0 mm)
Uploaded: April 14, 2017
Shared: November 16, 2017
Total Price: $20.10

Mini version of VESC6 [email protected]

Mini version of VESC6 [email protected]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Payal-VanGoffrier-ECUcontroller2

author: graham.van
Top
Bottom

2 layer board of 3.94 x 2.15 inches (100.0 x 54.6 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $42.30

Improved based on comments by Chris Santos.

Improved based on comments by Chris Santos.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Payal-VanGoffrier-ECUoutput

author: graham.van
Top
Bottom

2 layer board of 0.99 x 1.70 inches (25.1 x 43.2 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $8.35

Output circuit for ECU

Output circuit for ECU

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

a1 milling.brd

author: dual-soic-adapter-with-gnd
Top
Bottom

2 layer board of 2.53 x 0.97 inches (64.2 x 24.6 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $12.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

msop16.brd

author: dual-soic-adapter-with-gnd
Top
Bottom

2 layer board of 1.64 x 0.95 inches (41.6 x 24.1 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $7.75

SOP/SOIC adapter board with full ground plane. Use solder jumper to connect IC ground pin to ground plane.

SOP/SOIC adapter board with full ground plane. Use solder jumper to connect IC ground pin to ground plane.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shield_PCB_OSH.zip

author: RG-Custom
Top
Bottom

2 layer board of 3.72 x 2.02 inches (94.5 x 51.3 mm)
Uploaded: November 15, 2017
Shared: November 15, 2017
Total Price: $37.60

Pro Micro joystick shield Source code available on https://github.com/RGCustom/Joystick-Shield-RG-Custom

Pro Micro joystick shield Source code available on https://github.com/RGCustom/Joystick-Shield-RG-Custom

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1IO_ESP01_DS_V3

author: Electrico
Top
Bottom

2 layer board of 1.10 x 1.97 inches (28.0 x 50.0 mm)
Uploaded: November 15, 2017
Shared: November 15, 2017
Total Price: $10.85

Remote 1 Input, 1 Output probe with ESP01 for MQTT

Remote 1 Input, 1 Output probe with ESP01 for MQTT

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PresostatoDigital.zip

author: Electrico
Top
Bottom

2 layer board of 1.65 x 0.95 inches (42.0 x 24.0 mm)
Uploaded: June 01, 2017
Shared: November 15, 2017
Total Price: $7.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pnp_led_segment_gerber.zip

author: MichaelB
Top
Bottom

2 layer board of 1.78 x 0.80 inches (45.2 x 20.2 mm)
Uploaded: November 15, 2017
Shared: November 15, 2017
Total Price: $7.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy