2 layer board of 0.83 x 0.83 inches (21.1 x 21.1 mm)
Uploaded:
July 18th 2018
Shared:
July 18th 2018
Total Price:
$3.40
!untested prototype!
it got changed a bit to fit the D4 better, so this is an old prototype design, works but not …
!untested prototype!
it got changed a bit to fit the D4 better, so this is an old prototype design, works but not ideal fitting
order in 2 Oz to get 0.8mm thick boards!
voltage regulated to 2.8V each LED has its own resistor so you can mix colors and brightness levels as you wish
C1, C2: 1uF 0402 10V
LDO: MIC5365-2.8YC5-TR
Pads fit 0402 originally
also 0603 fits very tight so reflow with hot air or heatplate only
use at own risk
!untested prototype!
it got changed a bit to fit the D4 better, so this is an old prototype design, works but not …
!untested prototype!
it got changed a bit to fit the D4 better, so this is an old prototype design, works but not ideal fitting
order in 2 Oz to get 0.8mm thick boards!
voltage regulated to 2.8V each LED has its own resistor so you can mix colors and brightness levels as you wish
C1, C2: 1uF 0402 10V
LDO: MIC5365-2.8YC5-TR
Pads fit 0402 originally
also 0603 fits very tight so reflow with hot air or heatplate only
use at own risk
