rc2014_6809
author: ancientcomputing
2 layer board of 3.99 x 2.00 inches (101.3 x 50.8 mm)
Uploaded:
May 07, 2017
Shared:
May 01, 2018
Total Price:
$39.85
6809 CPU Board. Designed for RC2014.
6809 CPU Board. Designed for RC2014.
e.m.f Meter Production V1
author: GearsNGenes
2 layer board of 1.45 x 4.15 inches (36.8 x 105.4 mm)
Uploaded:
March 30, 2018
Shared:
May 01, 2018
Total Price:
$30.05
measures voltage. more user friendly than precursor
measures voltage. more user friendly than precursor
Lamp
author: Victor_Arnaiz
2 layer board of 1.15 x 0.71 inches (29.2 x 18.1 mm)
Uploaded:
April 30, 2018
Shared:
May 01, 2018
Total Price:
$4.05
An attiny85 board to work in conjunction with a radar-based presence detection module to turn on and off a couple of LED string lights to light up my entrance hallway.
The attiny85 sleeps if no presence is detected, the module however consumes around 2mA, which is significantly more than a PI…
Show full description
An attiny85 board to work in conjunction with a radar-based presence detection module to turn on and off a couple of LED string lights to light up my entrance hallway.
The attiny85 sleeps if no presence is detected, the module however consumes around 2mA, which is significantly more than a PI…
Show full description
LampController
author: wouterdevinck
4 layer board of 3.15 x 1.10 inches (80.0 x 28.0 mm)
Uploaded:
April 30, 2018
Shared:
April 30, 2018
Total Price:
$34.70
IF-C01COMG Clone SCART input, READ NOTE
author: skum
2 layer board of 1.39 x 4.03 inches (35.2 x 102.4 mm)
Uploaded:
April 30, 2018
Shared:
April 30, 2018
Total Price:
$27.90
NOTE: This is deprecated, use https://www.oshpark.com/shared_projects/AJ7xHRxi instead. Unless you plan on not using the internal speaker.
RGB SCART daughter board for the IF-C01COMG Clone board. This board also has support for a sync stripper circuit selectable by SW2. If enabled the LED …
Show full description
NOTE: This is deprecated, use https://www.oshpark.com/shared_projects/AJ7xHRxi instead. Unless you plan on not using the internal speaker.
RGB SCART daughter board for the IF-C01COMG Clone board. This board also has support for a sync stripper circuit selectable by SW2. If enabled the LED …
Show full description
Avionics Board IREC2018
author: CharlesDove
2 layer board of 3.66 x 3.16 inches (92.9 x 80.2 mm)
Uploaded:
April 30, 2018
Shared:
April 30, 2018
Total Price:
$57.70
Riskband Battery Test Interface
author: JWhitley
2 layer board of 2.20 x 2.04 inches (55.8 x 51.8 mm)
Uploaded:
April 30, 2018
Shared:
April 30, 2018
Total Price:
$22.40
Interface PCB for testing RISKBAND batteries during assembly.
Interface PCB for testing RISKBAND batteries during assembly.
controller_rev1.1(flat)
author: OreSat
4 layer board of 1.58 x 1.78 inches (40.2 x 45.2 mm)
Uploaded:
April 09, 2018
Shared:
April 30, 2018
Total Price:
$28.10
OreSat ACS Baord v1.1 - Reaction Wheel and Magnetorquer control board.
OreSat ACS Baord v1.1 - Reaction Wheel and Magnetorquer control board.
Fluke Scopemeter BNC adapter
author: sjm
2 layer board of 3.33 x 0.73 inches (84.5 x 18.4 mm)
Uploaded:
April 30, 2018
Shared:
April 30, 2018
Total Price:
$12.05
Simple adapter that allows BNC probes to be attached to a Fluke Scopemeter that uses banana sockets.
Uses 2x Pomona 4788 right angle BNC female sockets and 3x Pomona 72918 4mm banana plugs with threaded studs.
Simple adapter that allows BNC probes to be attached to a Fluke Scopemeter that uses banana sockets.
Uses 2x Pomona 4788 right angle BNC female sockets and 3x Pomona 72918 4mm banana plugs with threaded studs.
Dr. Frank's LTZ1000 10V reference (v1)
author: pepaslabs
2 layer board of 3.15 x 1.97 inches (80.0 x 50.0 mm)
Uploaded:
April 30, 2018
Shared:
April 30, 2018
Total Price:
$31.00
See https://github.com/pepaslabs/dr-frank-ltz1000. Based on the design at http://www.eevblog.com/forum/metrology/mx-reference/msg1297126/#msg1297126 See https://github.com/pepaslabs/dr-frank-ltz1000
See https://github.com/pepaslabs/dr-frank-ltz1000. Based on the design at http://www.eevblog.com/forum/metrology/mx-reference/msg1297126/#msg1297126 See https://github.com/pepaslabs/dr-frank-ltz1000
PX Reference (v2.4.1)
author: pepaslabs
2 layer board of 1.93 x 1.83 inches (49.0 x 46.5 mm)
Uploaded:
April 29, 2018
Shared:
April 29, 2018
Total Price:
$17.60
An LTZ1000-based 7V reference, based on the circuits of Andreas of the EEVBlog forum.
See http://www.eevblog.com/forum/metrology/px-reference/ and https://github.com/pepaslabs/px-ref/tree/master/kicad/releases/v2.4.1
An LTZ1000-based 7V reference, based on the circuits of Andreas of the EEVBlog forum.
See http://www.eevblog.com/forum/metrology/px-reference/ and https://github.com/pepaslabs/px-ref/tree/master/kicad/releases/v2.4.1