Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

TruckCape for Hammond 1455 (L or N) - Rev4 - MITM

author: jeremy-daily
Top
Bottom

2 layer board of 3.92 x 4.74 inches (99.5 x 120.3 mm)
Uploaded: March 04, 2019
Shared: March 04, 2019
Total Price: $92.75

A Man in the middle for heavy vehicle networks. Uses relays to switch between the different networks and insert a beaglebone black as the MiTM.

A Man in the middle for heavy vehicle networks. Uses relays to switch between the different networks and insert a beaglebone black as the MiTM.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SCART-breakout

author: skum
Top
Bottom

2 layer board of 2.13 x 1.45 inches (54.0 x 36.7 mm)
Uploaded: March 03, 2019
Shared: March 04, 2019
Total Price: $15.35

RGB SCART breakout board which wires the RGB and sync/composite to solder pads (or pins if you prefer). It has pads for putting in resistors and capacitors which are common when RGB modding CRT sets. Resistor values will differ depending on the set, but for many JVC pro monitors the capacitors C1…

Show full description

RGB SCART breakout board which wires the RGB and sync/composite to solder pads (or pins if you prefer). It has pads for putting in resistors and capacitors which are common when RGB modding CRT sets. Resistor values will differ depending on the set, but for many JVC pro monitors the capacitors C1…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Issue 3 v6 rev2

author: Vyper68
Top
Bottom

2 layer board of 8.40 x 5.09 inches (213.4 x 129.4 mm)
Uploaded: March 04, 2019
Shared: March 04, 2019
Total Price: $213.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - SPW2430 Vertical Board

author: dramsay
Top
Bottom

2 layer board of 1.64 x 0.65 inches (41.6 x 16.6 mm)
Uploaded: December 24, 2018
Shared: March 04, 2019
Total Price: $5.35

SPW2430 Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

SPW2430 Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - SPW2430 Horizontal Board

author: dramsay
Top
Bottom

2 layer board of 2.35 x 2.15 inches (59.8 x 54.7 mm)
Uploaded: December 24, 2018
Shared: March 04, 2019
Total Price: $25.35

SPW2430 Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

SPW2430 Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - Single-Ended to Balanced Converter

author: dramsay
Top
Bottom

2 layer board of 1.23 x 0.65 inches (31.2 x 16.5 mm)
Uploaded: December 25, 2018
Shared: March 04, 2019
Total Price: $3.95

Simple single-ended to balanced signal circuit.

by Tony Terrasa and David Ramsay

github link.

Simple single-ended to balanced signal circuit.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - Electret Horizontal Board

author: dramsay
Top
Bottom

2 layer board of 2.35 x 2.15 inches (59.8 x 54.7 mm)
Uploaded: December 26, 2018
Shared: March 04, 2019
Total Price: $25.35

Electret Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

Electret Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - Electret Vertical Board

author: dramsay
Top
Bottom

2 layer board of 1.64 x 0.65 inches (41.6 x 16.6 mm)
Uploaded: December 26, 2018
Shared: March 04, 2019
Total Price: $5.35

Electret Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

Electret Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - VM1010 Horizontal Board

author: dramsay
Top
Bottom

2 layer board of 2.35 x 2.15 inches (59.8 x 54.7 mm)
Uploaded: December 26, 2018
Shared: March 04, 2019
Total Price: $25.35

VM1010 Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

VM1010 Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - VM1010 Vertical Board

author: dramsay
Top
Bottom

2 layer board of 1.64 x 0.65 inches (41.6 x 16.6 mm)
Uploaded: December 26, 2018
Shared: March 04, 2019
Total Price: $5.35

VM1010 Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

VM1010 Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - SPV1840 Horizontal Board

author: dramsay
Top
Bottom

2 layer board of 2.35 x 2.15 inches (59.8 x 54.7 mm)
Uploaded: December 26, 2018
Shared: March 04, 2019
Total Price: $25.35

SPV1840 Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

SPV1840 Board for horizontal polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - SPV1840 Vertical Board

author: dramsay
Top
Bottom

2 layer board of 1.64 x 0.65 inches (41.6 x 16.6 mm)
Uploaded: December 26, 2018
Shared: March 04, 2019
Total Price: $5.35

SPV1840 Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

SPV1840 Board for vertical polar measurement.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Polar Measurement Project - Vertical Mount Mating Board

author: dramsay
Top
Bottom

2 layer board of 2.22 x 2.03 inches (56.5 x 51.5 mm)
Uploaded: March 04, 2019
Shared: March 04, 2019
Total Price: $22.55

This board mates to the pogo pins on the Turntable Base board, exposing headers centered along the axis of rotation. This board serves as the base for Vertical Mount boards.

by Tony Terrasa and David Ramsay

github link.

This board mates to the pogo pins on the Turntable Base board, exposing headers centered along the axis of rotation. This board serves as the base for Vertical Mount boards.

by Tony Terrasa and David Ramsay

github link.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nrF52840 Reference Layout

author: hydronics
Top
Bottom

2 layer board of 2.46 x 2.76 inches (62.4 x 70.0 mm)
Uploaded: March 04, 2019
Shared: March 04, 2019
Total Price: $33.85

This is a reference design for the nrF52840 for easy SWD programming and testing. This layout uses the nrF52840 module from Raytek called the MDBT50Q. This PCB has been tested and it works! This design relied…

Show full description

This is a reference design for the nrF52840 for easy SWD programming and testing. This layout uses the nrF52840 module from Raytek called the MDBT50Q. This PCB has been tested and it works! This design relied…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VicorPCB

author: Joshs333
Top
Bottom

2 layer board of 5.85 x 2.80 inches (148.6 x 71.2 mm)
Uploaded: March 04, 2019
Shared: March 04, 2019
Total Price: $81.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Think SWCAN teensy v2

author: Warlock
Top
Bottom

2 layer board of 1.59 x 1.90 inches (40.3 x 48.3 mm)
Uploaded: March 03, 2019
Shared: March 03, 2019
Total Price: $15.05

Singe Wire CAN shield for Teensy 3.2.
Based on NCV7356.

Input: 12V, Ground, 2x12V signal, thermistor
Output: 12V, Ground, SWCAN

  • High Voltage Wake-up capable
  • Thermistor connector
  • 2x 12V signal inputs
  • Voltage sensing
  • Connector for display (I2C)

This controller is used f…

Show full description

Singe Wire CAN shield for Teensy 3.2.
Based on NCV7356.

Input: 12V, Ground, 2x12V signal, thermistor
Output: 12V, Ground, SWCAN

  • High Voltage Wake-up capable
  • Thermistor connector
  • 2x 12V signal inputs
  • Voltage sensing
  • Connector for display (I2C)

This controller is used f…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

29f0XX GSU-CX4 Adapter V3

author: Arthrimus
Top
Bottom

2 layer board of 0.55 x 1.18 inches (14.0 x 29.8 mm)
Uploaded: March 03, 2019
Shared: March 03, 2019
Total Price: $3.20

Make sure to order in 0.8mm thickness for easy soldering.

This new version of the adapter moves the GSU/CX4 jumper so that it no longer interferes with larger 29f016 flash packages. You should now be able to use 29f016 or any orther tsop48 flash. Also this corrects silk screen errors where I a…

Show full description

Make sure to order in 0.8mm thickness for easy soldering.

This new version of the adapter moves the GSU/CX4 jumper so that it no longer interferes with larger 29f016 flash packages. You should now be able to use 29f016 or any orther tsop48 flash. Also this corrects silk screen errors where I a…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BabyPinkBoost2

author: suchahardman.com
Top
Bottom

2 layer board of 0.92 x 1.06 inches (23.4 x 27.0 mm)
Uploaded: June 18, 2018
Shared: March 03, 2019
Total Price: $4.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MCP7941x RTC Breakout Board with Temperature Sensor

author: JChristensen
Top
Bottom

2 layer board of 1.10 x 1.15 inches (27.9 x 29.2 mm)
Uploaded: April 07, 2014
Shared: March 03, 2019
Total Price: $6.30

v2.1

v2.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

led_flasherV2B

author: RVProject
Top
Bottom

2 layer board of 0.70 x 0.59 inches (17.9 x 15.0 mm)
Uploaded: February 23, 2019
Shared: March 02, 2019
Total Price: $2.05

Circuit board to repair Solar Powered LED accent lighting. See www/rv-project.com/repairs/tikifix.php for details.

alt text

Circuit board to repair Solar Powered LED accent lighting. See www/rv-project.com/repairs/tikifix.php for details.

alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy