Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Sollwertgeber Shield V1

author: arduinopraxis
Top
Bottom

2 layer board of 2.71 x 2.09 inches (68.9 x 53.0 mm)
Uploaded: February 08, 2019
Shared: February 08, 2019
Total Price: $28.30

Sollwertgeber Shield V1 aus Buch "Arduino Praxiseinstieg"

Sollwertgeber Shield V1 aus Buch "Arduino Praxiseinstieg"

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Coil_Test_V01

author: Arkadi_Raf
Top
Bottom

2 layer board of 1.70 x 0.99 inches (43.1 x 25.1 mm)
Uploaded: February 08, 2019
Shared: February 08, 2019
Total Price: $8.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

hammond_1551G_devboard_Lipo_charger.kicad_pcb

author: SquantMuts
Top
Bottom

2 layer board of 1.74 x 1.15 inches (44.2 x 29.2 mm)
Uploaded: February 01, 2019
Shared: February 08, 2019
Total Price: $9.95

Lipo battery charger in a Hammond 1551G case with some prototyping area

Lipo battery charger in a Hammond 1551G case with some prototyping area

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Miniature ATtiny10 SMT Breakout Board, Rev.1

author: lietk12
Top
Bottom

2 layer board of 0.26 x 0.26 inches (6.5 x 6.5 mm)
Uploaded: February 08, 2019
Shared: February 08, 2019
Total Price: $0.30

Board for easy access to ATtiny10 pins with pogo pins or soldered wires. Pads on the back enable powering by an SMD coin cell battery (though the unused pads need to be covered with tape before use).

Board for easy access to ATtiny10 pins with pogo pins or soldered wires. Pads on the back enable powering by an SMD coin cell battery (though the unused pads need to be covered with tape before use).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LabMotorAdapter_V2

author: milhead
Top
Bottom

2 layer board of 0.78 x 1.16 inches (19.7 x 29.5 mm)
Uploaded: January 25, 2019
Shared: February 08, 2019
Total Price: $4.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TPS799xx LDO Application Board

author: Paolo_Iocco
Top
Bottom

2 layer board of 0.34 x 0.35 inches (8.7 x 9.0 mm)
Uploaded: February 07, 2019
Shared: February 07, 2019
Total Price: $0.60

TPS799xx LDO Application Board

TPS799xx LDO Application Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tiny Function Generator

author: johnsondavies
Top
Bottom

2 layer board of 1.60 x 1.25 inches (40.7 x 31.8 mm)
Uploaded: December 23, 2018
Shared: February 07, 2019
Total Price: $10.00

A signal generator based on an ATtiny85 that uses Direct Digital Synthesis to generate a range of different waveforms, including sine, square, triangle, and noise.

See <http://www.technoblogy.com/show?2FCL>.

A signal generator based on an ATtiny85 that uses Direct Digital Synthesis to generate a range of different waveforms, including sine, square, triangle, and noise.

See <http://www.technoblogy.com/show?2FCL>.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlueSaab v6.1.1

author: Edison517
Top
Bottom

2 layer board of 2.51 x 2.51 inches (63.7 x 63.7 mm)
Uploaded: January 13, 2019
Shared: February 07, 2019
Total Price: $31.45

Same as v6.1, but added fiducials.

Same as v6.1, but added fiducials.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ADIS_Teensy_Arduino Breakout RevD

author: juchong
Top
Bottom

2 layer board of 2.11 x 2.36 inches (53.6 x 59.9 mm)
Uploaded: February 07, 2019
Shared: February 07, 2019
Total Price: $24.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Easy_Z80_V1.0

author: Serge
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.1 x 100.1 mm)
Uploaded: February 07, 2019
Shared: February 07, 2019
Total Price: $77.65

An Easy to build Z80 based single board computer

An Easy to build Z80 based single board computer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

flight lights v0.2

author: floz
Top
Bottom

2 layer board of 0.80 x 1.36 inches (20.2 x 34.5 mm)
Uploaded: February 07, 2019
Shared: February 07, 2019
Total Price: $5.40

updated board, moved headers for radio and led connections to backside

updated board, moved headers for radio and led connections to backside

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

A1308 / A1309 Linear Hall Sensor Mounting Board

author: XNA
Top
Bottom

2 layer board of 0.75 x 0.40 inches (19.1 x 10.2 mm)
Uploaded: February 07, 2019
Shared: February 07, 2019
Total Price: $1.50

Breaks out a A1308 or A1309 SSIP-3 linear output ratiometric hall sensor to a 100mil header with a mounting screw, and includes the recommended RC filter and decoupling capacitor.

Centerline of A1308KUA is 250mil from mounting hole.

R1 = 4.7k Ohm

C1 = 4.7 nF

C2 = 0.1uF

Breaks out a A1308 or A1309 SSIP-3 linear output ratiometric hall sensor to a 100mil header with a mounting screw, and includes the recommended RC filter and decoupling capacitor.

Centerline of A1308KUA is 250mil from mounting hole.

R1 = 4.7k Ohm

C1 = 4.7 nF

C2 = 0.1uF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BalloonMOBOV1

author: ryanakieva
Top
Bottom

4 layer board of 3.56 x 3.78 inches (90.4 x 96.1 mm)
Uploaded: February 06, 2019
Shared: February 06, 2019
Total Price: $134.60

STRATOS Motherboard

STRATOS Motherboard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi1541io rev4

author: hernan43
Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded: February 06, 2019
Shared: February 06, 2019
Total Price: $28.30

This is an IO adapter board for the Raspberry Pi 3, based on the awesome Pi1541 project by Steve White. It is currently very much work in progress. USE AT YOUR OWN RISK!

https://github.com/hackup/pi1541io

This is an IO adapter board for the Raspberry Pi 3, based on the awesome Pi1541 project by Steve White. It is currently very much work in progress. USE AT YOUR OWN RISK!

https://github.com/hackup/pi1541io

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AmpXPkg1

author: W7PUA
Top
Bottom

2 layer board of 1.24 x 0.85 inches (31.6 x 21.7 mm)
Uploaded: January 07, 2019
Shared: February 06, 2019
Total Price: $5.25

RF amplifier for frequencies up to about 6 GHz. Has high pass filtering and matching on both the input and output. See http://www.janbob.com/electron/RFAmp1/RFAmp1.htm for more details. Be sure to order the boards with the thin 0.8 mm option at checkout. Be careful, you need to check the box–…

Show full description

RF amplifier for frequencies up to about 6 GHz. Has high pass filtering and matching on both the input and output. See http://www.janbob.com/electron/RFAmp1/RFAmp1.htm for more details. Be sure to order the boards with the thin 0.8 mm option at checkout. Be careful, you need to check the box–…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTiny10 Carrier PB2 LED-04

author: wholder
Top
Bottom

2 layer board of 0.60 x 0.30 inches (15.3 x 7.7 mm)
Uploaded: December 04, 2018
Shared: February 06, 2019
Total Price: $0.90

ATTiny10 Breakout Board

I designed this board for use with my ATTiny10IDE project, which is streamlined IDE for coding with the ATtiny10 and other ATTiny Devices. It's designed for the 6 pin, ATTiny4/5/9/10 family of AVR chips and the board can b…

Show full description

ATTiny10 Breakout Board

I designed this board for use with my ATTiny10IDE project, which is streamlined IDE for coding with the ATtiny10 and other ATTiny Devices. It's designed for the 6 pin, ATTiny4/5/9/10 family of AVR chips and the board can b…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LFR rev 2B

author: Bunsen
Top
Bottom

4 layer board of 2.11 x 1.42 inches (53.6 x 36.1 mm)
Uploaded: February 06, 2019
Shared: February 06, 2019
Total Price: $30.00

https://github.com/UBNanosatLab/lfr-hardware/commit/9bb26f8685cdc460532e651ea54e4a1c65842757

https://github.com/UBNanosatLab/lfr-hardware/commit/9bb26f8685cdc460532e651ea54e4a1c65842757

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF SPDT switch SKY13405

author: Bunsen
Top
Bottom

4 layer board of 0.87 x 0.87 inches (22.2 x 22.2 mm)
Uploaded: February 06, 2019
Shared: February 06, 2019
Total Price: $7.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ACP3-X-CTL-PCB rev D.kicad_pcb

author: Angel_of_Rust
Top
Bottom

2 layer board of 2.71 x 1.98 inches (68.8 x 50.4 mm)
Uploaded: January 22, 2019
Shared: February 06, 2019
Total Price: $26.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

42b_JFET

author: reboots
Top
Bottom

2 layer board of 0.60 x 3.10 inches (15.3 x 78.8 mm)
Uploaded: February 06, 2019
Shared: February 06, 2019
Total Price: $9.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy