Shared Projects by mtrcycllvr

Shared Projects by mtrcycllvr

Bachmann Shay Chuff Trigger version 1.4

Top
Bottom

2 layer board of 3.23 x 0.41 inches (82.1 x 10.5 mm)
Uploaded: January 10th 2024
Shared: January 10th 2024
Total Price: $6.65

This is the forth iteration of this board - this SHOULD be the final version - version 1.2 and 1.3 had a problem with non-continuous ground planes that left the DRV5033 hall effect sensors without a ground connection.. DOH.. My bad.

This is the forth iteration of this board - this SHOULD be the final version - version 1.2 and 1.3 had a problem with non-continuous ground planes that left the DRV5033 hall effect sensors without a ground connection.. DOH.. My bad.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

railprov2.kicad_pcb

Top
Bottom

2 layer board of 3.40 x 1.43 inches (86.3 x 36.2 mm)
Uploaded: May 26th 2020
Shared: January 25th 2022
Total Price: $24.20

Simple input to servo action (and one power switch) via Arduino clone circuitry.

Simple input to servo action (and one power switch) via Arduino clone circuitry.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy WS2812B adapter

Top
Bottom

2 layer board of 2.62 x 1.22 inches (66.4 x 30.9 mm)
Uploaded: September 9th 2019
Shared: September 9th 2019
Total Price: $15.90

A simple adapter designed for model train caboose lighting via a random number of WS2812 RGB LEDs for the interior lighting and one buffered LED for the EOT (End of Train) device found in some caboose models.. Potentiometers VR1/2 and switch SW1 to control behavior. (interior color, intensity, et…

Show full description

A simple adapter designed for model train caboose lighting via a random number of WS2812 RGB LEDs for the interior lighting and one buffered LED for the EOT (End of Train) device found in some caboose models.. Potentiometers VR1/2 and switch SW1 to control behavior. (interior color, intensity, et…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RAA_left.kicad_pcb

Top
Bottom

2 layer board of 2.11 x 1.83 inches (53.6 x 46.5 mm)
Uploaded: February 26th 2019
Shared: March 28th 2019
Total Price: $19.30

A way to tilt our ILI9341 TFT display up on edge on the left side of a car..

A way to tilt our ILI9341 TFT display up on edge on the left side of a car..

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RAA_right.kicad_pcb

Top
Bottom

2 layer board of 2.28 x 1.72 inches (57.9 x 43.7 mm)
Uploaded: February 26th 2019
Shared: March 28th 2019
Total Price: $19.60

A simple adapter to tile our ILI9341 TFT screen up on edge, right side of car..

A simple adapter to tile our ILI9341 TFT screen up on edge, right side of car..

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC