Shared Projects by BRIAN-lOUGH

Shared Projects by BRIAN-lOUGH

Gerber_PCB_IDC Extension_2021-04-05

Top
Bottom

2 layer board of 1.05 x 0.89 inches (26.7 x 22.6 mm)
Uploaded: April 5th 2021
Shared: April 5th 2021
Total Price: $4.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 Matrix Nunchuck for Brian Loughs Matrix board

Top
Bottom

2 layer board of 0.78 x 0.91 inches (19.7 x 23.1 mm)
Uploaded: April 2nd 2020
Shared: April 2nd 2020
Total Price: $3.50

Slots into the GY521 slot of my matrix board

https://www.tindie.com/products/brianlough/esp32-matrix-shield-mini-32/

Slots into the GY521 slot of my matrix board

https://www.tindie.com/products/brianlough/esp32-matrix-shield-mini-32/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nunchuck Breakout V2

Top
Bottom

2 layer board of 0.89 x 0.27 inches (22.5 x 7.0 mm)
Uploaded: February 17th 2020
Shared: February 17th 2020
Total Price: $1.20

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

Slighter narrower than previous version, but it will still need to be filed to remove the panel tabs

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

Slighter narrower than previous version, but it will still need to be filed to remove the panel tabs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Chuck Breakout

Top
Bottom

2 layer board of 0.89 x 0.28 inches (22.5 x 7.0 mm)
Uploaded: January 30th 2020
Shared: January 30th 2020
Total Price: $1.20

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

A simple breakout board for Nintendo Wii Nunchuck controllers, which can be controlled by i2c

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB Coin Cell V1.2 - Top

Top
Bottom

2 layer board of 0.73 x 0.72 inches (18.5 x 18.2 mm)
Uploaded: October 28th 2019
Shared: October 28th 2019
Total Price: $2.60

Rectangle version of the PCB Coin Cell. This is the top.

USB connector used: https://lcsc.com/product-detail/USB-Connectors_Jing-Extension-of-the-Electronic-Co-C40939_C40939.html

You need to order the base too - https://oshpark.com/shared_projects/xAnGcWgn

Rectangle version of the PCB Coin Cell. This is the top.

USB connector used: https://lcsc.com/product-detail/USB-Connectors_Jing-Extension-of-the-Electronic-Co-C40939_C40939.html

You need to order the base too - https://oshpark.com/shared_projects/xAnGcWgn

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC