Shared Projects

Shared Projects

JST-SH Breakout v1.0

author: chipmc
Top
Bottom

2 layer board of 0.61 x 0.62 inches (15.5 x 15.8 mm)
Uploaded: February 12, 2020
Shared: September 17, 2020
Total Price: $1.90

Breakout for JST-SH cables / connectors

Breakout for JST-SH cables / connectors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SysBus2Ribbon v13_2020-08-10

author: Hey_Birt
Top
Bottom

2 layer board of 2.11 x 0.76 inches (53.6 x 19.3 mm)
Uploaded: August 10, 2020
Shared: September 16, 2020
Total Price: $8.00

Converts a TRS80 Model 100 System Bus 40pin DIP connector to T102 Sys Bus pinout. Requires a 40pin FF ribbon cable.

Converts a TRS80 Model 100 System Bus 40pin DIP connector to T102 Sys Bus pinout. Requires a 40pin FF ribbon cable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TTL-to-LVDS revA

author: mza
Top
Bottom

2 layer board of 1.09 x 1.10 inches (27.8 x 28.0 mm)
Uploaded: September 15, 2020
Shared: September 16, 2020
Total Price: $6.00

converts a TTL or CMOS input to LVDS and drives that on to the 3/6 pair of an 8P8C/RJ45 connector.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/TTL-to-LVDS.revA.schematic.pdf>

converts a TTL or CMOS input to LVDS and drives that on to the 3/6 pair of an 8P8C/RJ45 connector.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/TTL-to-LVDS.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Frequency Counter FrontEnd V1

author: dewhisna
Top
Bottom

2 layer board of 0.50 x 0.75 inches (12.8 x 19.1 mm)
Uploaded: September 16, 2020
Shared: September 16, 2020
Total Price: $1.85

Front-end Schmitt Trigger conditioning board for cheap Chinese 1-50MHz Frequency Counter kits.

Front-end Schmitt Trigger conditioning board for cheap Chinese 1-50MHz Frequency Counter kits.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LTC

author: dbit
Top
Bottom

2 layer board of 0.90 x 0.63 inches (22.9 x 15.9 mm)
Uploaded: April 09, 2020
Shared: September 16, 2020
Total Price: $2.80

50/60 Hz line time clock (Rev B)

50/60 Hz line time clock (Rev B)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STARSURFING EFFECTS big stuffed turkey

author: StarsurfingEffects
Top
Bottom

4 layer board of 2.37 x 3.41 inches (60.2 x 86.7 mm)
Uploaded: September 15, 2020
Shared: September 15, 2020
Total Price: $80.80

big muff/ jumbo tonebender fuzz

big muff/ jumbo tonebender fuzz

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PICKIT4-adaptorISP

author: WestfW
Top
Bottom

2 layer board of 0.49 x 0.95 inches (12.4 x 24.2 mm)
Uploaded: March 05, 2020
Shared: September 15, 2020
Total Price: $2.30

Programming adapter for Microchip SNAP or PICKit4 to standard 6pin AVR ISP

Programming adapter for Microchip SNAP or PICKit4 to standard 6pin AVR ISP

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PICKIT4-adaptorUPDI

author: WestfW
Top
Bottom

2 layer board of 0.49 x 0.95 inches (12.4 x 24.2 mm)
Uploaded: March 05, 2020
Shared: September 15, 2020
Total Price: $2.30

Programming adapter for Microchip SNAP or PICKit4 to 3pin UPDI or 5pins for ARM SWD (probably flying leads)

Programming adapter for Microchip SNAP or PICKit4 to 3pin UPDI or 5pins for ARM SWD (probably flying leads)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Game Boy Passthrough Cartridge

author: endrift
Top
Bottom

2 layer board of 2.01 x 3.52 inches (51.0 x 89.4 mm)
Uploaded: September 01, 2019
Shared: September 14, 2020
Total Price: $35.30

Game Boy cartridge for creating a passthrough with an attached slot on top. (Designed by nitro2k01)

Game Boy cartridge for creating a passthrough with an attached slot on top. (Designed by nitro2k01)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BattMonTimerV0.9

author: tenorio
Top
Bottom

2 layer board of 3.47 x 3.47 inches (88.1 x 88.1 mm)
Uploaded: September 14, 2020
Shared: September 14, 2020
Total Price: $60.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PA_Double_Wide

author: cpldcpu
Top
Bottom

2 layer board of 1.99 x 0.25 inches (50.6 x 6.4 mm)
Uploaded: August 10, 2014
Shared: September 14, 2020
Total Price: $2.45

PA_Double_Wide

PA_Double_Wide

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

fc nano-carrier

author: FedorCommander
Top
Bottom

2 layer board of 1.14 x 0.67 inches (29.1 x 17.1 mm)
Uploaded: September 14, 2020
Shared: September 14, 2020
Total Price: $3.80

double power lines

double power lines

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

fc nano-carrier

author: FedorCommander
Top
Bottom

2 layer board of 1.14 x 0.67 inches (29.1 x 17.1 mm)
Uploaded: September 14, 2020
Shared: September 14, 2020
Total Price: $3.80

Little board i made for my buddies who wanna use tbs nano rx in the planes… Cheap and quick ;) Big thanks to Trappy who provided dimensions since i didnt have virgin nano laying around ;)))

Little board i made for my buddies who wanna use tbs nano rx in the planes… Cheap and quick ;) Big thanks to Trappy who provided dimensions since i didnt have virgin nano laying around ;)))

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATSAMD2x Breakout Board (Rev. A)

author: elevendroids
Top
Bottom

2 layer board of 0.95 x 1.97 inches (24.1 x 50.1 mm)
Uploaded: August 16, 2020
Shared: September 14, 2020
Total Price: $9.35

Small breakout board designed for the SAM D20 and SAM D21 ARM Cortex-M0+ microcontrollers from Microchip

Confirmed working.

Github

Small breakout board designed for the SAM D20 and SAM D21 ARM Cortex-M0+ microcontrollers from Microchip

Confirmed working.

Github

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32L010 Breakout Board (Rev. B)

author: elevendroids
Top
Bottom

2 layer board of 0.95 x 1.97 inches (24.1 x 50.1 mm)
Uploaded: August 16, 2020
Shared: September 14, 2020
Total Price: $9.35

Small breakout board designed primarly for the STM32L010K8T6 ARM Cortex-M0+ microcontroller.

Can also be used with other pin-compatible STM32 MCUs in LQFP-32 package:

  • Most of the STM32L0 family
  • STM32L4x2 (ARM Cortex-M4)

Confirmed working.

[GitHub](https://github.com/elevendroids/…

Show full description

Small breakout board designed primarly for the STM32L010K8T6 ARM Cortex-M0+ microcontroller.

Can also be used with other pin-compatible STM32 MCUs in LQFP-32 package:

  • Most of the STM32L0 family
  • STM32L4x2 (ARM Cortex-M4)

Confirmed working.

[GitHub](https://github.com/elevendroids/…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32F405 protomatter FeatherWing

author: jepler
Top
Bottom

2 layer board of 2.01 x 0.91 inches (51.0 x 23.1 mm)
Uploaded: May 20, 2020
Shared: September 14, 2020
Total Price: $9.10

Hook your Feather STM32F405 to a Protomatter RGB Matrix with a minimum of fuss. The RGB and CLK pins are configured for a minimum of memory usage. Just follow the silkscreen to get the proper RGBMatrix setup.

Note that the pinout is different than the one on the Learn guide, I (unintentional…

Show full description

Hook your Feather STM32F405 to a Protomatter RGB Matrix with a minimum of fuss. The RGB and CLK pins are configured for a minimum of memory usage. Just follow the silkscreen to get the proper RGBMatrix setup.

Note that the pinout is different than the one on the Learn guide, I (unintentional…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi_RJ45_Adapter

author: akhlut
Top
Bottom

2 layer board of 0.94 x 2.15 inches (23.9 x 54.7 mm)
Uploaded: September 10, 2020
Shared: September 14, 2020
Total Price: $10.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

fpanel 10x2 v2

author: akhlut
Top
Bottom

2 layer board of 0.50 x 1.05 inches (12.8 x 26.8 mm)
Uploaded: September 10, 2020
Shared: September 14, 2020
Total Price: $2.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi USB Power Splitter

author: akhlut
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.5 x 25.5 mm)
Uploaded: September 11, 2020
Shared: September 14, 2020
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rpi_led_switch_board.kicad_pcb

author: redlegjed
Top
Bottom

2 layer board of 3.06 x 1.97 inches (77.6 x 50.1 mm)
Uploaded: August 16, 2020
Shared: September 14, 2020
Total Price: $30.10

Demo board for Raspberry Pi with LEDs, buttons & switches

Demo board for Raspberry Pi with LEDs, buttons & switches

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy