Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

sot23.kicad_pcb

author: marsairforce
Top
Bottom

2 layer board of 0.32 x 0.27 inches (8.2 x 6.9 mm)
Uploaded: September 29, 2020
Shared: October 15, 2020
Total Price: $0.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

soic8.kicad_pcb

author: marsairforce
Top
Bottom

2 layer board of 0.48 x 0.42 inches (12.2 x 10.7 mm)
Uploaded: September 29, 2020
Shared: October 15, 2020
Total Price: $1.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

soic14.kicad_pcb

author: marsairforce
Top
Bottom

2 layer board of 0.48 x 0.72 inches (12.3 x 18.3 mm)
Uploaded: October 14, 2020
Shared: October 14, 2020
Total Price: $1.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PiTAG V1.1

author: neillees
Top
Bottom

2 layer board of 3.00 x 2.25 inches (76.3 x 57.2 mm)
Uploaded: December 24, 2019
Shared: October 14, 2020
Total Price: $33.85

JTAG programming switch for Raspberry Pi 2+, Pi Zero….. Program your Raspberry Pi via JTAG (simple JTAG config program required for SD card: Put GPIO22-25,27 in ALT4 mode; GPIO4 in ALT5 mode). The JTAG loaded software can then reconfigure these for GPIO use (place switch to RUN mode).
Desi…

Show full description

JTAG programming switch for Raspberry Pi 2+, Pi Zero….. Program your Raspberry Pi via JTAG (simple JTAG config program required for SD card: Put GPIO22-25,27 in ALT4 mode; GPIO4 in ALT5 mode). The JTAG loaded software can then reconfigure these for GPIO use (place switch to RUN mode).
Desi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STMShield

author: Tom-H
Top
Bottom

2 layer board of 2.31 x 3.16 inches (58.6 x 80.2 mm)
Uploaded: October 14, 2020
Shared: October 14, 2020
Total Price: $36.45

For F303RE Dev Board

For F303RE Dev Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VDC_8

author: Board_8
Top
Bottom

2 layer board of 1.32 x 2.36 inches (33.6 x 60.0 mm)
Uploaded: October 13, 2020
Shared: October 14, 2020
Total Price: $15.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MOTHBOT VER 3

author: decent-design
Top
Bottom

2 layer board of 1.84 x 3.12 inches (46.7 x 79.3 mm)
Uploaded: October 06, 2020
Shared: October 14, 2020
Total Price: $28.65

https://github.com/edgecollective/dippy-slim/tree/master/ver3

https://github.com/edgecollective/dippy-slim/tree/master/ver3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rpi-cc2530-LR-uart

author: pmayer
Top
Bottom

2 layer board of 1.46 x 0.74 inches (37.1 x 18.8 mm)
Uploaded: October 14, 2020
Shared: October 14, 2020
Total Price: $5.35

E18-MS1PA1-IPX

E18-MS1PA1-IPX

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FACS Electronics Rev1

author: emily.huynh
Top
Bottom

4 layer board of 4.33 x 4.69 inches (110.0 x 119.0 mm)
Uploaded: October 13, 2020
Shared: October 13, 2020
Total Price: $202.90

Board for controlling various FACS electronics.

Board for controlling various FACS electronics.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATSAMD11D-M.zip

author: aberry
Top
Bottom

2 layer board of 0.71 x 1.33 inches (18.1 x 33.7 mm)
Uploaded: August 28, 2016
Shared: October 13, 2020
Total Price: $4.70

Barebones dev board for SAM D11 (ARM Cortex M0) MCU

Barebones dev board for SAM D11 (ARM Cortex M0) MCU

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATSAMD21E17A-aDIPter v0.1.zip

author: aberry
Top
Bottom

2 layer board of 0.71 x 1.61 inches (18.0 x 40.8 mm)
Uploaded: February 27, 2017
Shared: October 13, 2020
Total Price: $5.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTinyx04-aDIPter

author: aberry
Top
Bottom

2 layer board of 0.61 x 0.56 inches (15.5 x 14.2 mm)
Uploaded: March 21, 2019
Shared: October 13, 2020
Total Price: $1.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTinyx04-aDIPter

author: aberry
Top
Bottom

2 layer board of 0.61 x 0.71 inches (15.5 x 18.1 mm)
Uploaded: March 21, 2019
Shared: October 13, 2020
Total Price: $2.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BikeLapse Camera Trigger MAIN BOARD - V1.3p24

author: EfficiencyJunky
Top
Bottom

2 layer board of 1.97 x 2.37 inches (50.1 x 60.1 mm)
Uploaded: October 13, 2020
Shared: October 13, 2020
Total Price: $23.30

This is the Main PCB for the BikeLapse Camera Trigger. The companion hardware to BikeLapse.com, and open source hardware/software platform for making a virtual catalog of your bike rides or other adventure activities!

Overview of project here: https://turnerkirk.com/bikelapse

Github project…

Show full description

This is the Main PCB for the BikeLapse Camera Trigger. The companion hardware to BikeLapse.com, and open source hardware/software platform for making a virtual catalog of your bike rides or other adventure activities!

Overview of project here: https://turnerkirk.com/bikelapse

Github project…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Burns Buzzaround

author: jfann
Top
Bottom

2 layer board of 2.03 x 1.61 inches (51.6 x 40.9 mm)
Uploaded: October 13, 2020
Shared: October 13, 2020
Total Price: $16.35

With 9V to -9V polarity inverter separated out on same board so that it can be included if needed. All parts listed on board (BOM). Transitor pinout is "standard" 2N3906, so depending on your Germanium transistors, twisting leg may be needed (but in most cases this will work, or you may need to…

Show full description

With 9V to -9V polarity inverter separated out on same board so that it can be included if needed. All parts listed on board (BOM). Transitor pinout is "standard" 2N3906, so depending on your Germanium transistors, twisting leg may be needed (but in most cases this will work, or you may need to…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mini-fit-jr-3pos-rail revB

author: mza
Top
Bottom

2 layer board of 2.45 x 0.91 inches (62.1 x 23.1 mm)
Uploaded: October 12, 2020
Shared: October 12, 2020
Total Price: $11.10

power distribution (+5V/-5V) on a molex mini-fit jr 3pos connector. 3 labeled solder connections can take 16 AWG wire. Capacitors and red/green LEDs are optional.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/mini-fit-jr-3pos-rail.revB.schematic.pdf>

power distribution (+5V/-5V) on a molex mini-fit jr 3pos connector. 3 labeled solder connections can take 16 AWG wire. Capacitors and red/green LEDs are optional.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/mini-fit-jr-3pos-rail.revB.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BikeLapse Camera Trigger BUTTON BOARD - V1.3p18

author: EfficiencyJunky
Top
Bottom

2 layer board of 0.50 x 1.32 inches (12.6 x 33.6 mm)
Uploaded: October 12, 2020
Shared: October 12, 2020
Total Price: $3.25

A PCB for the buttons used in the BikeLapse Camera Trigger

Overview of project here: https://turnerkirk.com/bikelapse

Github project files: https://github.com/EfficiencyJunky/BikeLapseCameraTrigger

A PCB for the buttons used in the BikeLapse Camera Trigger

Overview of project here: https://turnerkirk.com/bikelapse

Github project files: https://github.com/EfficiencyJunky/BikeLapseCameraTrigger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 Adapter v1.0

author: JonathanThorn
Top
Bottom

2 layer board of 0.98 x 1.33 inches (24.9 x 33.8 mm)
Uploaded: October 12, 2020
Shared: October 12, 2020
Total Price: $6.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nRF9160 Feather - Latest

author: jaredwolff
Top
Bottom

4 layer board of 2.00 x 0.90 inches (50.9 x 22.9 mm)
Uploaded: July 03, 2020
Shared: October 12, 2020
Total Price: $18.00

Changelist:

  • Slightly updated USB connector
  • Moved GPS parts away from edge
  • Connected all applicable ground pads
  • Added SWD pins on bottom side.

Changelist:

  • Slightly updated USB connector
  • Moved GPS parts away from edge
  • Connected all applicable ground pads
  • Added SWD pins on bottom side.
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

A10 preamp x1000 - REVA

author: GGrissonnanche
Top
Bottom

2 layer board of 4.14 x 2.68 inches (105.0 x 68.1 mm)
Uploaded: October 12, 2020
Shared: October 12, 2020
Total Price: $55.40

2GNDPLANES

2GNDPLANES

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy