Shared Projects

Shared Projects

Raspberry Pi Sump Pump Level Monitor Interface V1

author: dewhisna
Top
Bottom

2 layer board of 2.10 x 0.55 inches (53.4 x 14.0 mm)
Uploaded: September 29, 2020
Shared: September 29, 2020
Total Price: $5.80

Simple interface for HC-SR04 ultrasonic sensor to a Raspberry Pi to monitor sump water level.

Simple interface for HC-SR04 ultrasonic sensor to a Raspberry Pi to monitor sump water level.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

audio_switcher_v2

author: gladclef
Top
Bottom

2 layer board of 1.86 x 3.15 inches (47.3 x 80.1 mm)
Uploaded: September 28, 2020
Shared: September 29, 2020
Total Price: $29.30

Switcher and mute button between headset and 2 computers.

Version 2 changes: Switched to using Analog Devices audio switch https://www.analog.com/media/en/technical-documentation/data-sheets/ADG733_734.pdf halved the board size de-popping the mic when mute is activated added reverse-cu…

Show full description

Switcher and mute button between headset and 2 computers.

Version 2 changes: Switched to using Analog Devices audio switch https://www.analog.com/media/en/technical-documentation/data-sheets/ADG733_734.pdf halved the board size de-popping the mic when mute is activated added reverse-cu…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ACTIK Retrofit r1

author: fabiobaltieri
Top
Bottom

2 layer board of 1.23 x 0.85 inches (31.3 x 21.7 mm)
Uploaded: June 20, 2020
Shared: September 28, 2020
Total Price: $5.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Chrysalis_2020-09-28

author: DLW
Top
Bottom

2 layer board of 0.99 x 0.82 inches (25.0 x 20.9 mm)
Uploaded: September 28, 2020
Shared: September 28, 2020
Total Price: $4.05

https://drive.google.com/file/d/1tA_uFtwSWMGxY5PEtWDTCb6ovqRQQvLh/view?usp=sharing

https://drive.google.com/file/d/1tA_uFtwSWMGxY5PEtWDTCb6ovqRQQvLh/view?usp=sharing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FRAG_NINJA

author: slashbyte
Top
Bottom

2 layer board of 0.58 x 1.24 inches (14.7 x 31.4 mm)
Uploaded: September 13, 2020
Shared: September 28, 2020
Total Price: $3.55

Wii Nunchuk Mod Chip for PC (USB)

Gitlab Project

Digikey Cart

Wii Nunchuk Mod Chip for PC (USB)

Gitlab Project

Digikey Cart

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIP Daughterboard (Unfiltered) V2

author: Liamcohen
Top
Bottom

2 layer board of 0.81 x 0.68 inches (20.6 x 17.3 mm)
Uploaded: September 25, 2020
Shared: September 28, 2020
Total Price: $2.75

16 pin DIP adapter to FuzzButton motherboard for legacy sample holders. Includes bottom Finish.

16 pin DIP adapter to FuzzButton motherboard for legacy sample holders. Includes bottom Finish.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PadSwitcher64 DIP version

author: Hojo_Norem
Top
Bottom

2 layer board of 1.96 x 1.03 inches (49.7 x 26.3 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $10.10

PCB for the PadSwitcher64 interface.

This interface allows the use of Super Nintendo compatible control pads with the Commodore 64 and 128.

See the GitHub for further information and software: https://github.com/Hojo-Norem/PadSwitcher64

PCB for the PadSwitcher64 interface.

This interface allows the use of Super Nintendo compatible control pads with the Commodore 64 and 128.

See the GitHub for further information and software: https://github.com/Hojo-Norem/PadSwitcher64

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCM5100ABreakout

author: estrandb
Top
Bottom

2 layer board of 2.52 x 1.53 inches (64.1 x 38.9 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $19.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NIMIO-toupee revA

author: mza
Top
Bottom

4 layer board of 0.97 x 0.99 inches (24.7 x 25.2 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $9.60

toupee (althea daughterboard) to bring in one NIM signal and to drive another one out. corresponding LEDs as well.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/NIMIO-toupee.revA.schematic.pdf>

toupee (althea daughterboard) to bring in one NIM signal and to drive another one out. corresponding LEDs as well.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/NIMIO-toupee.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DebugEdge Revision 1.1

author: tannewt
Top
Bottom

2 layer board of 0.71 x 0.51 inches (18.1 x 13.1 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $1.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ConnectedMotionSense.v01c

author: PeskyProducts
Top
Bottom

4 layer board of 1.34 x 1.34 inches (34.1 x 34.1 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $18.00

Wearable gait/limb/head tracker. STM32WB host with embedded BLE. Wake-on-motion/sleep-on-no-motion functionality. 16 MB SPI flash for data logging. Secure element for FOTA. Accepts various modules including absolute orientation estimator, environmental sensor, and neuron gesture analyzer. Ultra-…

Show full description

Wearable gait/limb/head tracker. STM32WB host with embedded BLE. Wake-on-motion/sleep-on-no-motion functionality. 16 MB SPI flash for data logging. Secure element for FOTA. Accepts various modules including absolute orientation estimator, environmental sensor, and neuron gesture analyzer. Ultra-…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ConnectedMotionSense.v01b

author: PeskyProducts
Top
Bottom

4 layer board of 1.34 x 1.34 inches (34.1 x 34.1 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $18.00

Wearable gait/limb/head tracker. STM32WB host with embedded BLE. Wake-on-motion/sleep-on-no-motion functionality. 16 MB SPI flash for data logging. Secure element for FOTA. Accepts various modules including absolute orientation estimator, environmental sensor, and neuron gesture analyzer. Ultra-…

Show full description

Wearable gait/limb/head tracker. STM32WB host with embedded BLE. Wake-on-motion/sleep-on-no-motion functionality. 16 MB SPI flash for data logging. Secure element for FOTA. Accepts various modules including absolute orientation estimator, environmental sensor, and neuron gesture analyzer. Ultra-…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

elton-john revA

author: mza
Top
Bottom

2 layer board of 1.58 x 1.58 inches (40.1 x 40.1 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $12.40

3A/-1.5A dual regulator with molex mini-fit jr connectors

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/elton-john.revA.schematic.pdf>

3A/-1.5A dual regulator with molex mini-fit jr connectors

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/elton-john.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

opamp_power_supply.kicad_pcb

author: marsairforce
Top
Bottom

2 layer board of 4.26 x 2.49 inches (108.1 x 63.3 mm)
Uploaded: September 24, 2020
Shared: September 26, 2020
Total Price: $53.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

reggie revD

author: mza
Top
Bottom

2 layer board of 1.03 x 0.96 inches (26.1 x 24.4 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $4.90

3A regulator

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/reggie.revD.schematic.pdf>

3A regulator

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/reggie.revD.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SBRE3

author: jderickson89
Top
Bottom

4 layer board of 4.71 x 1.61 inches (119.5 x 40.9 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $75.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dwight revA

author: mza
Top
Bottom

2 layer board of 1.03 x 1.06 inches (26.1 x 27.0 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $5.40

-1.5A regulator

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/dwight.revA.schematic.pdf>

-1.5A regulator

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/dwight.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HeadphoneAmp

author: DX-MON
Top
Bottom

2 layer board of 3.96 x 3.15 inches (100.5 x 80.0 mm)
Uploaded: June 19, 2016
Shared: September 26, 2020
Total Price: $62.30

Objective-2 based DAC + headphone amplifier

Objective-2 based DAC + headphone amplifier

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Illusion.brd

author: johnsondavies
Top
Bottom

2 layer board of 5.15 x 1.00 inches (130.8 x 25.4 mm)
Uploaded: April 20, 2017
Shared: September 26, 2020
Total Price: $25.75

Illusion Display

Illusion Display

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PRAMCR2032 V2

author: karrots
Top
Bottom

2 layer board of 1.18 x 0.67 inches (30.1 x 17.1 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $3.95

Adapter for 1\2AA to CR2032 batteries. Can be used on systems that don’t require rechargeable batteries like Macintosh Classics.

https://www.taydaelectronics.com/coin-battery-holder-cr2025-and-cr2032.html

Adapter for 1\2AA to CR2032 batteries. Can be used on systems that don’t require rechargeable batteries like Macintosh Classics.

https://www.taydaelectronics.com/coin-battery-holder-cr2025-and-cr2032.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy