laser-driver revM
author: mza
2 layer board of 0.63 x 0.87 inches (16.0 x 22.1 mm)
Uploaded:
October 09, 2020
Shared:
October 09, 2020
Total Price:
$2.70
connects two-pin (0.1") LED to coax connector. With 50 Ohm terminator.
use 2 oz copper, 0.8mm thickness
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revM.schematic.pdf>
connects two-pin (0.1") LED to coax connector. With 50 Ohm terminator.
use 2 oz copper, 0.8mm thickness
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revM.schematic.pdf>
Wearable Pocketometer Pocket
author: kwan3217
2 layer board of 2.60 x 1.50 inches (66.1 x 38.2 mm)
Uploaded:
October 08, 2020
Shared:
October 09, 2020
Total Price:
$19.50
Wearable sensor set appropriate for recording motion on such things as a roller coaster. This board goes in your pocket, and hosts a PJRC Teensy 4.1 to control the sensors and record the data. The other boards go on your shoulder and in the heel of …
Show full description
Wearable sensor set appropriate for recording motion on such things as a roller coaster. This board goes in your pocket, and hosts a PJRC Teensy 4.1 to control the sensors and record the data. The other boards go on your shoulder and in the heel of …
Show full description
Active Precharge 3b
author: lqbweb
2 layer board of 2.04 x 0.92 inches (51.8 x 23.2 mm)
Uploaded:
October 09, 2020
Shared:
October 09, 2020
Total Price:
$9.30
This is the following implementation: https://endless-sphere.com/forums/viewtopic.php?f=3&t=40142&start=125#p718553
Thanks fechter!
This is the following implementation: https://endless-sphere.com/forums/viewtopic.php?f=3&t=40142&start=125#p718553
Thanks fechter!
BRD1001-001-004-320 - Register
author: JimWright4089
2 layer board of 7.88 x 1.89 inches (200.1 x 48.1 mm)
Uploaded:
October 09, 2020
Shared:
October 09, 2020
Total Price:
$74.50
This is a simple register for the 16-bit computer.
This is a simple register for the 16-bit computer.
IS31FL3236A.LedDriver.v02
author: PeskyProducts
4 layer board of 0.84 x 0.75 inches (21.3 x 19.1 mm)
Uploaded:
October 09, 2020
Shared:
October 09, 2020
Total Price:
$6.30
Demo board for IS31FL3236A led driver with 12 Lumex RGB leds.
Demo board for IS31FL3236A led driver with 12 Lumex RGB leds.
SingleWireLinkage V5.kicad_pcb
author: CleverOtterElectronics
2 layer board of 1.45 x 1.30 inches (36.9 x 32.9 mm)
Uploaded:
October 09, 2020
Shared:
October 09, 2020
Total Price:
$9.40
N64 Comp/RGB
author: Rappolt
2 layer board of 0.69 x 1.60 inches (17.6 x 40.6 mm)
Uploaded:
October 07, 2020
Shared:
October 07, 2020
Total Price:
$5.50
RGB+S restoration with YPbPr conversion by default. YPbPr can be disabled and bypassed for only boosted RGB output.
RGB+S restoration with YPbPr conversion by default. YPbPr can be disabled and bypassed for only boosted RGB output.
NEC S-VIDEO EVAL Board
author: Voultar
2 layer board of 0.65 x 1.08 inches (16.6 x 27.5 mm)
Uploaded:
October 07, 2020
Shared:
October 07, 2020
Total Price:
$3.50
This is an EVALUATION board for an S-Video & Composite Video Driver that I designed specifically for all PC-Engine / Turbografx-16 variants.
The component map, circuit schematic, and preparation instructions are all including within the ZIP file.
This is an EVALUATION board for an S-Video & Composite Video Driver that I designed specifically for all PC-Engine / Turbografx-16 variants.
The component map, circuit schematic, and preparation instructions are all including within the ZIP file.
NEOExtend DB15
author: BigRedPimp
2 layer board of 1.65 x 1.60 inches (42.0 x 40.7 mm)
Uploaded:
June 12, 2020
Shared:
October 07, 2020
Total Price:
$13.25
Maps 20 pin arcade stick pinout to Undamned Neo Geo pin numbers on a DB-15 connector.
Maps 20 pin arcade stick pinout to Undamned Neo Geo pin numbers on a DB-15 connector.
NEC S-Video EVAL Board (DEPRECIATED)
author: Voultar
2 layer board of 0.65 x 1.08 inches (16.6 x 27.5 mm)
Uploaded:
October 07, 2020
Shared:
October 07, 2020
Total Price:
$3.50
Depreciated. Go to: https://oshpark.com/shared_projects/vmmVfv2H
Depreciated. Go to: https://oshpark.com/shared_projects/vmmVfv2H
BrewPi-ESP8266 - LCD TH DuPont NoRJ v1.1
author: Thorrak
2 layer board of 1.82 x 1.97 inches (46.3 x 50.0 mm)
Uploaded:
October 06, 2020
Shared:
October 06, 2020
Total Price:
$17.95
Version 1.1 of the BrewPi-ESP8266 LCD/Through Hole/DuPont/No-RJ-45 board. Built for LOLIN D1 Mini, with attached SparkFun-style level shifter, using DuPont-style connector and through hole resistors/capacitors. This board eliminates the requirement for a separate "sensor breakout" board at the ex…
Show full description
Version 1.1 of the BrewPi-ESP8266 LCD/Through Hole/DuPont/No-RJ-45 board. Built for LOLIN D1 Mini, with attached SparkFun-style level shifter, using DuPont-style connector and through hole resistors/capacitors. This board eliminates the requirement for a separate "sensor breakout" board at the ex…
Show full description
Toasty.rev4
author: ElectricCrowbar
2 layer board of 1.32 x 1.24 inches (33.6 x 31.6 mm)
Uploaded:
October 06, 2020
Shared:
October 06, 2020
Total Price:
$8.20
Best if ordered "After Dark"
https://github.com/robertely/toasty
Best if ordered "After Dark"
https://github.com/robertely/toasty