Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Inverter.kicad_pcb

author: meull
Top
Bottom

4 layer board of 2.37 x 2.54 inches (60.1 x 64.6 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $60.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRV8825 Carrier Board

author: dkemppai
Top
Bottom

2 layer board of 1.30 x 1.40 inches (33.1 x 35.6 mm)
Uploaded: November 28, 2020
Shared: December 01, 2020
Total Price: $9.10

DRV8825 Carrier Board. Single Carrier board with headers for Pololu DRV8825 stepper motor driver. Uses Phoenix Contact MPT series pin headers. Space for a 10mm x 5mm spaced electrolytic (220uF or so), and three 1210 or 1206 size ceramic capacitors (3.3uf, 4.7uF, or 10uF, etc.). Three pin shorti…

Show full description

DRV8825 Carrier Board. Single Carrier board with headers for Pololu DRV8825 stepper motor driver. Uses Phoenix Contact MPT series pin headers. Space for a 10mm x 5mm spaced electrolytic (220uF or so), and three 1210 or 1206 size ceramic capacitors (3.3uf, 4.7uF, or 10uF, etc.). Three pin shorti…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sega bypass version 2

author: FrankStrasser
Top
Bottom

2 layer board of 1.30 x 1.88 inches (33.1 x 47.7 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $12.20

Order .8 mil for best fit. The second version of my genesis rgb bypass board now no need for a jumper for hd retrovision cables but if using them you need to remove resistor r 71 from bottom of board near the multiout connector. If using mono audio and hd retrovision cables its possible to have…

Show full description

Order .8 mil for best fit. The second version of my genesis rgb bypass board now no need for a jumper for hd retrovision cables but if using them you need to remove resistor r 71 from bottom of board near the multiout connector. If using mono audio and hd retrovision cables its possible to have…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

flash.kicad_pcb

author: bschwind
Top
Bottom

2 layer board of 0.70 x 1.10 inches (17.8 x 28.0 mm)
Uploaded: June 08, 2019
Shared: December 01, 2020
Total Price: $3.85

v0.2

v0.2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

meshtastic_microusb

author: mchamster
Top
Bottom

2 layer board of 0.83 x 0.53 inches (21.0 x 13.4 mm)
Uploaded: December 01, 2020
Shared: December 01, 2020
Total Price: $2.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ck_gen.zip

author: tambo
Top
Bottom

4 layer board of 3.18 x 2.18 inches (80.7 x 55.4 mm)
Uploaded: July 21, 2017
Shared: December 01, 2020
Total Price: $69.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ps_pul.zip

author: tambo
Top
Bottom

4 layer board of 2.98 x 2.18 inches (75.7 x 55.4 mm)
Uploaded: July 21, 2017
Shared: December 01, 2020
Total Price: $65.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Micro Speaker Array

author: NileshVetale
Top
Bottom

4 layer board of 10.01 x 1.66 inches (254.2 x 42.2 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $166.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Liquid Sunshine v2_2020-11-30

author: DLW
Top
Bottom

2 layer board of 0.99 x 1.06 inches (25.0 x 27.0 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $5.20

https://drive.google.com/file/d/1L_AHSQdWcqbNjIDSz02LkXgUjFsSqLcq/view?usp=sharing

https://drive.google.com/file/d/1L_AHSQdWcqbNjIDSz02LkXgUjFsSqLcq/view?usp=sharing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BRD1001-001-001-320 A Counting Registers

author: JimWright4089
Top
Bottom

2 layer board of 7.88 x 1.89 inches (200.1 x 48.1 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $74.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MultiTech Universal Socket

author: groinksan
Top
Bottom

2 layer board of 3.53 x 1.36 inches (89.6 x 34.6 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $23.95

Allows the proprietary 2mm MultiTech PCB to mount to a typical prototype breadboard @ 2.54mm. The 10-pin IDC connector can be used to interface a terminal/computer (DTE) with this board (DCE.)

Allows the proprietary 2mm MultiTech PCB to mount to a typical prototype breadboard @ 2.54mm. The 10-pin IDC connector can be used to interface a terminal/computer (DTE) with this board (DCE.)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 to OG Xbox Controller breakout

author: lowtolerance
Top
Bottom

2 layer board of 0.67 x 1.39 inches (17.0 x 35.2 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $4.65

A ESP32-S2-MINI1(U) module to OG Xbox Controller plug.

(UNTESTED)

This is a super simple circuit. Aside from the ESP32 module itself, (which is less than 16mm2), there are only eight passive components, all 0603 in size.

To upload firmware to the chip initially, it'd probably be easies…

Show full description

A ESP32-S2-MINI1(U) module to OG Xbox Controller plug.

(UNTESTED)

This is a super simple circuit. Aside from the ESP32 module itself, (which is less than 16mm2), there are only eight passive components, all 0603 in size.

To upload firmware to the chip initially, it'd probably be easies…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ePenguin-Debugger

author: penguinwashere
Top
Bottom

2 layer board of 1.77 x 1.66 inches (45.1 x 42.1 mm)
Uploaded: November 30, 2020
Shared: November 30, 2020
Total Price: $14.65

A little debugger used for solderless debugging on production boards. Includes usart pins!

A little debugger used for solderless debugging on production boards. Includes usart pins!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LiPo Battery Low Voltage Monitor V1

author: dewhisna
Top
Bottom

2 layer board of 1.00 x 0.85 inches (25.5 x 21.7 mm)
Uploaded: November 28, 2020
Shared: November 28, 2020
Total Price: $4.25

DO NOT BUILD – this design has oscillation issues in the voltage references causing continual false alarms. It's useless…

LiPo Battery Low Voltage Monitor for 2S and 3S battery packs with audible alarm. Designed for low-end RC Airplanes to sound warning when it's time to land. Design crite…

Show full description

DO NOT BUILD – this design has oscillation issues in the voltage references causing continual false alarms. It's useless…

LiPo Battery Low Voltage Monitor for 2S and 3S battery packs with audible alarm. Designed for low-end RC Airplanes to sound warning when it's time to land. Design crite…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stanley A Meyer PWM with Gate 9XA New Nov 2020

author: SecureSupplies
Top
Bottom

2 layer board of 6.70 x 3.36 inches (170.2 x 85.3 mm)
Uploaded: November 27, 2020
Shared: November 28, 2020
Total Price: $112.45

Stanley A Meyer PWM with Gate 9XA New Nov 2020

Stanley A Meyer PWM with Gate 9XA New Nov 2020

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stanley A Meyer Switch Trigger Power Board from Tps ver 4

author: SecureSupplies
Top
Bottom

2 layer board of 2.74 x 2.56 inches (69.6 x 65.0 mm)
Uploaded: November 28, 2020
Shared: November 28, 2020
Total Price: $35.05

Stanley A Meyer Switch Trigger Power Board from Tps ver 4

Stanley A Meyer Switch Trigger Power Board from Tps ver 4

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HL-1,2KFx automatic band switching with BCD 14

author: olegtf
Top
Bottom

2 layer board of 1.50 x 1.75 inches (38.2 x 44.5 mm)
Uploaded: November 28, 2020
Shared: November 28, 2020
Total Price: $13.15

HL-1,2KFx automatic band switching with BCD 14 https://www.unifiedmicro.com/decoder.html

HL-1,2KFx automatic band switching with BCD 14 https://www.unifiedmicro.com/decoder.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stanley A Meyer Vic Array Trigger board V 9

author: SecureSupplies
Top
Bottom

2 layer board of 7.32 x 3.71 inches (185.8 x 94.1 mm)
Uploaded: November 28, 2020
Shared: November 28, 2020
Total Price: $135.55

Stanley A Meyer Vic Array Trigger board V 9

Stanley A Meyer Vic Array Trigger board V 9

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dual VR Conditioner V0.1

author: keisport
Top
Bottom

2 layer board of 0.79 x 0.99 inches (20.1 x 25.1 mm)
Uploaded: November 28, 2020
Shared: November 28, 2020
Total Price: $3.85

LM1815-based SMD VR conditioner

Source files: https://gitlab.com/keisport/Dual_VR_Conditioner

LM1815-based SMD VR conditioner

Source files: https://gitlab.com/keisport/Dual_VR_Conditioner

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

htgen01

author: tbrowne
Top
Bottom

2 layer board of 2.93 x 1.39 inches (74.3 x 35.2 mm)
Uploaded: November 22, 2019
Shared: November 28, 2020
Total Price: $20.25

LM3481 48V -> 230V Boost Converter and Filter

LM3481 48V -> 230V Boost Converter and Filter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy