Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

HVcoil2oz

author: JWilly
Top
Bottom

2 layer board of 4.30 x 0.34 inches (109.2 x 8.6 mm)
Uploaded: January 02, 2019
Shared: March 09, 2021
Total Price: $7.25

8mm*104mm, 7 turns, 6mil/6mil, 2 layer, 2oz, 32mil

8mm*104mm, 7 turns, 6mil/6mil, 2 layer, 2oz, 32mil

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HVCoil1L4T10x20

author: JWilly
Top
Bottom

2 layer board of 4.30 x 0.34 inches (109.1 x 8.6 mm)
Uploaded: May 01, 2019
Shared: March 09, 2021
Total Price: $7.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZULF soldering tutorial

author: TAYLAB
Top
Bottom

2 layer board of 1.53 x 1.49 inches (38.9 x 37.9 mm)
Uploaded: February 10, 2021
Shared: March 09, 2021
Total Price: $11.40

This is the board for ZULF's soldering tutorial. Learn how to solder through-hole and surface mount resistors, and light up some LEDs. If you order this board using OSHpark's "after dark" service, you'll get to see the printed circuit traces more clearly as they will not be covered up by an opa…

Show full description

This is the board for ZULF's soldering tutorial. Learn how to solder through-hole and surface mount resistors, and light up some LEDs. If you order this board using OSHpark's "after dark" service, you'll get to see the printed circuit traces more clearly as they will not be covered up by an opa…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pocket Op Amp Lab

author: johnsondavies
Top
Bottom

2 layer board of 2.70 x 1.45 inches (68.7 x 36.9 mm)
Uploaded: February 02, 2021
Shared: March 09, 2021
Total Price: $19.60

A self-contained tool for experimenting with the configurable op amps in the AVR DB-series.

For more information see <http://www.technoblogy.com/show?3GMO>.

A self-contained tool for experimenting with the configurable op amps in the AVR DB-series.

For more information see <http://www.technoblogy.com/show?3GMO>.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

V2 Schematic_2021-03-08

author: VerdeGro
Top
Bottom

2 layer board of 3.95 x 3.16 inches (100.3 x 80.3 mm)
Uploaded: March 09, 2021
Shared: March 09, 2021
Total Price: $62.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

radpc_toupee_rev2_2021-03-08

author: Justin_P_Williams
Top
Bottom

2 layer board of 2.57 x 2.22 inches (65.3 x 56.3 mm)
Uploaded: March 09, 2021
Shared: March 09, 2021
Total Price: $28.45

Second revision of the RadPC Toupee. Takes in +28VDC and brings it down to +5VDC using a high range switching regulator. Additionally, it includes an RS422 to UART transceiver for comms to our proprietary RadPC Lunar single board computer.

Second revision of the RadPC Toupee. Takes in +28VDC and brings it down to +5VDC using a high range switching regulator. Additionally, it includes an RS422 to UART transceiver for comms to our proprietary RadPC Lunar single board computer.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Hydrophone Rev1

author: lightningmar
Top
Bottom

2 layer board of 1.88 x 1.12 inches (47.7 x 28.3 mm)
Uploaded: March 08, 2021
Shared: March 08, 2021
Total Price: $10.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

abrd

author: andijcr
Top
Bottom

2 layer board of 2.09 x 1.14 inches (53.1 x 29.1 mm)
Uploaded: March 08, 2021
Shared: March 08, 2021
Total Price: $11.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_PCB_Spector Preamp through hole

author: dwizum
Top
Bottom

2 layer board of 2.17 x 1.56 inches (55.0 x 39.5 mm)
Uploaded: March 08, 2021
Shared: March 08, 2021
Total Price: $16.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PS3 TaPol Interface v2

author: TimeWalker75a
Top
Bottom

2 layer board of 0.59 x 0.48 inches (15.0 x 12.3 mm)
Uploaded: March 08, 2021
Shared: March 08, 2021
Total Price: $1.40

Fixes issues in the original TCIB board design by Soulkilla

Fixes issues in the original TCIB board design by Soulkilla

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Koheron laser driver room interlock

author: joshua.rogers
Top
Bottom

2 layer board of 2.11 x 1.18 inches (53.6 x 30.1 mm)
Uploaded: March 08, 2021
Shared: March 08, 2021
Total Price: $12.45

A circuit for interlocking a Koheron laser driver with either a 12V active shutter line or normally closed room interlock circuit. When the room interlock 12V line goes low or the normally closed circuit opens, the LCK pin on the Koheron driver board is pulled low via the optocoupler. This boar…

Show full description

A circuit for interlocking a Koheron laser driver with either a 12V active shutter line or normally closed room interlock circuit. When the room interlock 12V line goes low or the normally closed circuit opens, the LCK pin on the Koheron driver board is pulled low via the optocoupler. This boar…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Spike Hold Test Circuit

author: Aerotusk
Top
Bottom

2 layer board of 0.87 x 0.77 inches (22.1 x 19.5 mm)
Uploaded: March 08, 2021
Shared: March 08, 2021
Total Price: $3.30

Single spike hold design

Single spike hold design

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MonKlock 5x7

author: Danjovic
Top
Bottom

2 layer board of 4.80 x 3.00 inches (122.0 x 76.3 mm)
Uploaded: March 07, 2021
Shared: March 07, 2021
Total Price: $72.10

Project Page: https://hackaday.io/project/178131-monklock

Project Page: https://hackaday.io/project/178131-monklock

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Load-PCB.kicad_pcb

author: SCD-AptMC
Top
Bottom

2 layer board of 2.21 x 0.99 inches (56.1 x 25.1 mm)
Uploaded: March 07, 2021
Shared: March 07, 2021
Total Price: $10.85

Load resistor switch board for LOMC phono preamp, using Grayhill 56 series 2-pole switch

Load resistor switch board for LOMC phono preamp, using Grayhill 56 series 2-pole switch

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pulsar P2 V3

author: dretay
Top
Bottom

2 layer board of 0.89 x 0.91 inches (22.6 x 23.2 mm)
Uploaded: January 06, 2021
Shared: March 07, 2021
Total Price: $4.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

12F675_KS_Luefter

author: Luftlandeapotheker
Top
Bottom

2 layer board of 1.77 x 0.99 inches (45.1 x 25.1 mm)
Uploaded: September 27, 2020
Shared: March 07, 2021
Total Price: $8.75

Automatic temperature-controlled fan-system

Automatic temperature-controlled fan-system

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jlink_adapter

author: iabdelkader
Top
Bottom

4 layer board of 0.52 x 1.01 inches (13.3 x 25.6 mm)
Uploaded: March 01, 2021
Shared: March 06, 2021
Total Price: $5.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DigiTach v1.7

author: AMVSolutions
Top
Bottom

2 layer board of 1.50 x 0.95 inches (38.2 x 24.2 mm)
Uploaded: March 06, 2021
Shared: March 06, 2021
Total Price: $7.15

Digital tachometer prototype.

Features:

  • Supports Brushless electric motors via direct connection.

  • Supports Glow plug engines via telemetry sensors such as SPMA9569.

  • Includes LCD readout screen with four 0.17" (4…

Show full description

Digital tachometer prototype.

Features:

  • Supports Brushless electric motors via direct connection.

  • Supports Glow plug engines via telemetry sensors such as SPMA9569.

  • Includes LCD readout screen with four 0.17" (4…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Lumex 0.17" LCD panel breakout

author: AMVSolutions
Top
Bottom

2 layer board of 0.90 x 0.80 inches (22.9 x 20.4 mm)
Uploaded: March 02, 2021
Shared: March 06, 2021
Total Price: $3.60

  • Designed for the Lumex 7-segment 0.17" LCD panel model LCD-S401M16KR.

  • Breadboard-friendy 0.1" headers spaced 0.6" apart.

  • Includes voltage divider for the COM lines using a resistor network.

  • Features a total of 14 pins: GND, 3V3, four COM lines, eight SEG lines.

  • Will work for…

Show full description

  • Designed for the Lumex 7-segment 0.17" LCD panel model LCD-S401M16KR.

  • Breadboard-friendy 0.1" headers spaced 0.6" apart.

  • Includes voltage divider for the COM lines using a resistor network.

  • Features a total of 14 pins: GND, 3V3, four COM lines, eight SEG lines.

  • Will work for…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DigiTach input stage breakout v1.1

author: AMVSolutions
Top
Bottom

2 layer board of 1.05 x 0.60 inches (26.8 x 15.3 mm)
Uploaded: March 06, 2021
Shared: March 06, 2021
Total Price: $3.15

Low-pass analog filter breakout board for tachometer.

  • Supports brushless motors and glow engine sensors.

Low-pass analog filter breakout board for tachometer.

  • Supports brushless motors and glow engine sensors.
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy