RGB to Component/S-Video/Composite - Expansion Board
2 layer board of 1.72 x 1.38 inches (43.8 x 35.2 mm)
Uploaded:
March 03, 2023
Shared:
March 03, 2023
Total Price:
$11.90
This is made to go BEFORE a 75 ohm series resistor on a RGB kit's output. 1V should be the RGB input p-p after termination; do your own DD.
This is made to go BEFORE a 75 ohm series resistor on a RGB kit's output. 1V should be the RGB input p-p after termination; do your own DD.
Intellivision AY-3-8900 Breakout
2 layer board of 0.89 x 0.74 inches (22.7 x 18.9 mm)
Uploaded:
November 27, 2021
Shared:
November 27, 2021
Total Price:
$3.30
Used with the Intellivision to breakout the connections needed for RGB kits, installed on the bottom. Take note of the pin numbers.
Used with the Intellivision to breakout the connections needed for RGB kits, installed on the bottom. Take note of the pin numbers.
Intellivision AY-3-8915 Breakout
2 layer board of 0.94 x 0.66 inches (23.9 x 16.9 mm)
Uploaded:
November 27, 2021
Shared:
November 27, 2021
Total Price:
$3.10
Used on the bottom of an Intellivision console to breakout the needed connections for RGB mods.
Used on the bottom of an Intellivision console to breakout the needed connections for RGB mods.
