J-Link to STDC14 adapter

author: dkonigs
Top
Bottom

2 layer board of 1.40 x 1.10 inches (35.6 x 27.9 mm)
Uploaded: October 01, 2021
Shared: October 19, 2021
Total Price: $7.70

Adapter to connect a Segger J-Link debug probe to cables designed for the STDC14 connector used on STLink-v3 debug probes. Jumpers are used to deal with pins that need to be rerouted when going from SWD to JTAG mode.

Adapter to connect a Segger J-Link debug probe to cables designed for the STDC14 connector used on STLink-v3 debug probes. Jumpers are used to deal with pins that need to be rerouted when going from SWD to JTAG mode.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy