Shared Projects

Shared Projects

smd2dip

author: jonwilhelmjr
Top
Bottom

2 layer board of 1.63 x 1.33 inches (41.4 x 33.7 mm)
Uploaded: October 30, 2013
Shared: October 30, 2013
Total Price: $10.80

adapter

adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BeagleBoy

author: jkridner
Top
Bottom

2 layer board of 3.50 x 4.75 inches (88.9 x 120.6 mm)
Uploaded: October 29, 2013
Shared: October 29, 2013
Total Price: $83.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5.8GHz A/V FPV Transmitter

author: TimJC
Top
Bottom

2 layer board of 1.15 x 1.55 inches (29.2 x 39.4 mm)
Uploaded: December 28, 2012
Shared: October 29, 2013
Total Price: $8.90

RCModelReviews.com DIY FPV Backpack

Youtube videos

RCMR forum thread

[The DIY 5.8GHz receiver can be found here](https://oshpark.co…

Show full description

RCModelReviews.com DIY FPV Backpack

Youtube videos

RCMR forum thread

[The DIY 5.8GHz receiver can be found here](https://oshpark.co…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5.8GHz A/V FPV Receiver

author: TimJC
Top
Bottom

2 layer board of 1.05 x 2.20 inches (26.7 x 55.9 mm)
Uploaded: December 28, 2012
Shared: October 29, 2013
Total Price: $11.55

RCModelReviews.com DIY FPV Backpack

Youtube videos

RCMR forum thread

[The DIY 5.8GHz transmitter can be found here](https://oshpa…

Show full description

RCModelReviews.com DIY FPV Backpack

Youtube videos

RCMR forum thread

[The DIY 5.8GHz transmitter can be found here](https://oshpa…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RN42 Breakout Board

author: bhasden
Top
Bottom

2 layer board of 1.22 x 0.66 inches (30.9 x 16.8 mm)
Uploaded: October 07, 2013
Shared: October 28, 2013
Total Price: $4.00

Breakout board for the RN42 bluetooth module.

Works.

Future revision thoughts:

  • surface mount pads for resistor, capacitor, LED are a bit close together
  • should mark each pins function on board.

Design from http://mbed.org/cookbook/RN-42-Bluetooth.

Breakout board for the RN42 bluetooth module.

Works.

Future revision thoughts:

  • surface mount pads for resistor, capacitor, LED are a bit close together
  • should mark each pins function on board.

Design from http://mbed.org/cookbook/RN-42-Bluetooth.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mBgc_Mini_Tc4424

author: Brodziek
Top
Bottom

2 layer board of 1.15 x 0.66 inches (29.1 x 16.8 mm)
Uploaded: October 25, 2013
Shared: October 28, 2013
Total Price: $3.75

Mini Brushless Gimbal Controler. Oryginal Idea by OlliW

Mini Brushless Gimbal Controler. Oryginal Idea by OlliW

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LCD Connector

author: Kilohercas
Top
Bottom

2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded: October 27, 2013
Shared: October 28, 2013
Total Price: $3.10

HTC Desire LCD connector for probing

HTC Desire LCD connector for probing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LNW80 Doubler 3-5-8 improved replica

author: jlanier67
Top
Bottom

2 layer board of 3.69 x 4.51 inches (93.6 x 114.6 mm)
Uploaded: September 15, 2013
Shared: October 27, 2013
Total Price: $83.15

An improved replica of the LNW80 doubler for the LNW80 and TRS-80 Model I, designed by Pascal Holdry. Design is copyright 2011 by Pascal Holdry, free for personal use. Please see http://home.online.no/~kr-lund/DoubleurLNW80_3-5-8.zip for more information.

An improved replica of the LNW80 doubler for the LNW80 and TRS-80 Model I, designed by Pascal Holdry. Design is copyright 2011 by Pascal Holdry, free for personal use. Please see http://home.online.no/~kr-lund/DoubleurLNW80_3-5-8.zip for more information.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HD44780 LCD Adapter

author: Frenchie
Top
Bottom

2 layer board of 0.80 x 2.00 inches (20.4 x 50.9 mm)
Uploaded: August 20, 2013
Shared: October 26, 2013
Total Price: $8.05

Adapter designed to mount on the rear of a HD44780 LCD to enable easier connection of a ribbon cable.

18x1 header down to 7x2 for compatability with both regular and RGB backlit devices. If using with a standard 16 pin device, mount a 6x2 header and leave the leftmost pins (closest to JCF 2013…

Show full description

Adapter designed to mount on the rear of a HD44780 LCD to enable easier connection of a ribbon cable.

18x1 header down to 7x2 for compatability with both regular and RGB backlit devices. If using with a standard 16 pin device, mount a 6x2 header and leave the leftmost pins (closest to JCF 2013…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AVR Based Transistor Tester

author: Frenchie
Top
Bottom

2 layer board of 1.91 x 1.38 inches (48.6 x 35.1 mm)
Uploaded: October 26, 2013
Shared: October 26, 2013
Total Price: $13.20

Transistor & component tester. Based on designs from Markus Frejek, Karl-Heinz Kübbeler & Markus Reschke. http://www.mikrocontroller.net/articles/AVR_Transistortester

This version uses SMD parts and is designed to be directly soldered on the back of a 16 pin HD44780 LCD using a 0.1" pin header…

Show full description

Transistor & component tester. Based on designs from Markus Frejek, Karl-Heinz Kübbeler & Markus Reschke. http://www.mikrocontroller.net/articles/AVR_Transistortester

This version uses SMD parts and is designed to be directly soldered on the back of a 16 pin HD44780 LCD using a 0.1" pin header…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPi rev2 GPIO breakout board

author: myq
Top
Bottom

2 layer board of 0.65 x 1.32 inches (16.5 x 33.5 mm)
Uploaded: October 26, 2013
Shared: October 26, 2013
Total Price: $4.25

Land ribbon cable from Raspberry Pi's GPIO Header in inner holes, DIP headers for breadboard in outer.

Land ribbon cable from Raspberry Pi's GPIO Header in inner holes, DIP headers for breadboard in outer.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

microSD USB v1.2 for MS2K

Top
Bottom

2 layer board of 1.35 x 1.13 inches (34.3 x 28.6 mm)
Uploaded: February 13, 2013
Shared: October 26, 2013
Total Price: $7.55

Test share… This is a combined uSD and USB interface for Gordon Anderson's MicroStar2000 Encoder.

Shared Mouser project to order components.

[BOM in .xls format](https://www.dropbox…

Show full description

Test share… This is a combined uSD and USB interface for Gordon Anderson's MicroStar2000 Encoder.

Shared Mouser project to order components.

[BOM in .xls format](https://www.dropbox…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Simple TV Out

author: lazzz
Top
Bottom

2 layer board of 2.79 x 0.80 inches (70.8 x 20.3 mm)
Uploaded: September 04, 2013
Shared: October 25, 2013
Total Price: $11.15

ATMEGA328-PU TV Out Atmega328 Minimal configuration with 16Mhz resonator. CR2032 will give you 10-15min of power. I'm at 10+ hrs running with 3xAAA batteries so far. Code for TV Out can be found online easily.

ATMEGA328-PU TV Out Atmega328 Minimal configuration with 16Mhz resonator. CR2032 will give you 10-15min of power. I'm at 10+ hrs running with 3xAAA batteries so far. Code for TV Out can be found online easily.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nrf24l01+ node board with Attiny84

author: kehribar
Top
Bottom

2 layer board of 1.20 x 1.20 inches (30.5 x 30.5 mm)
Uploaded: April 25, 2013
Shared: October 25, 2013
Total Price: $7.20

Wireless sensor node board for nrf24l01+ RF transceiver with Attiny84.

Details can be found at: http://kehribar.me/hardware/nrf24_node/

Wireless sensor node board for nrf24l01+ RF transceiver with Attiny84.

Details can be found at: http://kehribar.me/hardware/nrf24_node/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ethernet gateway design

author: kehribar
Top
Bottom

2 layer board of 1.81 x 1.59 inches (46.0 x 40.3 mm)
Uploaded: September 28, 2013
Shared: October 25, 2013
Total Price: $14.35

Yet another ethernet gateway design.

Details can be found at: http://kehribar.me/hardware/ethernetGateway

Yet another ethernet gateway design.

Details can be found at: http://kehribar.me/hardware/ethernetGateway

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Heatermeter 4.0 +RPi TC Modchip v2

author: bhilgert
Top
Bottom

2 layer board of 0.55 x 0.63 inches (14.0 x 16.0 mm)
Uploaded: October 25, 2013
Shared: October 25, 2013
Total Price: $1.70

An add-on board to a permit the use of a K-type thermocouple as the pit probe for Bryan Mayland's Heatermeter (version 4.0 with a Raspberry Pi)

An add-on board to a permit the use of a K-type thermocouple as the pit probe for Bryan Mayland's Heatermeter (version 4.0 with a Raspberry Pi)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pulser

author: bbuck
Top
Bottom

2 layer board of 1.82 x 1.04 inches (46.1 x 26.3 mm)
Uploaded: October 24, 2013
Shared: October 24, 2013
Total Price: $9.35

LED Pulser, V0 Dual capsense buttons, PIC12F1840 for PWMing

LED Pulser, V0 Dual capsense buttons, PIC12F1840 for PWMing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cypress Capsense Express CY8C20142 SOIC-8 IC breakout.

author: voidptr
Top
Bottom

2 layer board of 0.50 x 1.09 inches (12.7 x 27.6 mm)
Uploaded: January 21, 2013
Shared: October 24, 2013
Total Price: $2.70

Cypress Capsense Express CY8C20142 SOIC-8 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20142-SX1I

Cypress Capsense Express CY8C20142 SOIC-8 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20142-SX1I

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cypress Capsense CY8C20110 Breakout

author: voidptr
Top
Bottom

2 layer board of 0.61 x 1.97 inches (15.4 x 50.0 mm)
Uploaded: January 27, 2013
Shared: October 24, 2013
Total Price: $5.95

Cypress Capsense Express CY8C20110 SOIC-16 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805, except for LED pads which are 1205. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20110-SX2I

Cypress Capsense Express CY8C20110 SOIC-16 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805, except for LED pads which are 1205. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20110-SX2I

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Soic8 To Dip Adapter

author: voidptr
Top
Bottom

2 layer board of 0.44 x 0.44 inches (11.2 x 11.2 mm)
Uploaded: February 05, 2013
Shared: October 24, 2013
Total Price: $0.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy