Shared Projects

Shared Projects

nrf24l01+ node board with Attiny84

author: kehribar
Top
Bottom

2 layer board of 1.20 x 1.20 inches (30.5 x 30.5 mm)
Uploaded: April 25, 2013
Shared: October 25, 2013
Total Price: $7.20

Wireless sensor node board for nrf24l01+ RF transceiver with Attiny84.

Details can be found at: http://kehribar.me/hardware/nrf24_node/

Wireless sensor node board for nrf24l01+ RF transceiver with Attiny84.

Details can be found at: http://kehribar.me/hardware/nrf24_node/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ethernet gateway design

author: kehribar
Top
Bottom

2 layer board of 1.81 x 1.59 inches (46.0 x 40.3 mm)
Uploaded: September 28, 2013
Shared: October 25, 2013
Total Price: $14.35

Yet another ethernet gateway design.

Details can be found at: http://kehribar.me/hardware/ethernetGateway

Yet another ethernet gateway design.

Details can be found at: http://kehribar.me/hardware/ethernetGateway

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Heatermeter 4.0 +RPi TC Modchip v2

author: bhilgert
Top
Bottom

2 layer board of 0.55 x 0.63 inches (14.0 x 16.0 mm)
Uploaded: October 25, 2013
Shared: October 25, 2013
Total Price: $1.70

An add-on board to a permit the use of a K-type thermocouple as the pit probe for Bryan Mayland's Heatermeter (version 4.0 with a Raspberry Pi)

An add-on board to a permit the use of a K-type thermocouple as the pit probe for Bryan Mayland's Heatermeter (version 4.0 with a Raspberry Pi)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pulser

author: bbuck
Top
Bottom

2 layer board of 1.82 x 1.04 inches (46.1 x 26.3 mm)
Uploaded: October 24, 2013
Shared: October 24, 2013
Total Price: $9.35

LED Pulser, V0 Dual capsense buttons, PIC12F1840 for PWMing

LED Pulser, V0 Dual capsense buttons, PIC12F1840 for PWMing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cypress Capsense Express CY8C20142 SOIC-8 IC breakout.

author: voidptr
Top
Bottom

2 layer board of 0.50 x 1.09 inches (12.7 x 27.6 mm)
Uploaded: January 21, 2013
Shared: October 24, 2013
Total Price: $2.70

Cypress Capsense Express CY8C20142 SOIC-8 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20142-SX1I

Cypress Capsense Express CY8C20142 SOIC-8 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20142-SX1I

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cypress Capsense CY8C20110 Breakout

author: voidptr
Top
Bottom

2 layer board of 0.61 x 1.97 inches (15.4 x 50.0 mm)
Uploaded: January 27, 2013
Shared: October 24, 2013
Total Price: $5.95

Cypress Capsense Express CY8C20110 SOIC-16 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805, except for LED pads which are 1205. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20110-SX2I

Cypress Capsense Express CY8C20110 SOIC-16 IC breakout.

Includes i2c connectors, and room for optional pull-up resistors. All SMT parts are sized 0805, except for LED pads which are 1205. Protection resistor pads are 560ohm.

http://www.cypress.com/?mpn=CY8C20110-SX2I

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Soic8 To Dip Adapter

author: voidptr
Top
Bottom

2 layer board of 0.44 x 0.44 inches (11.2 x 11.2 mm)
Uploaded: February 05, 2013
Shared: October 24, 2013
Total Price: $0.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Barrel Connector Breakout Gerber

author: voidptr
Top
Bottom

2 layer board of 0.82 x 0.71 inches (20.8 x 18.1 mm)
Uploaded: March 13, 2013
Shared: October 24, 2013
Total Price: $2.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

modcopter Faraday Rev. 1

author: bklw
Top
Bottom

2 layer board of 3.58 x 1.68 inches (91.0 x 42.6 mm)
Uploaded: October 24, 2013
Shared: October 24, 2013
Total Price: $29.95

A quadcopter mainboard. Supports modules. More at m.hw.is

A quadcopter mainboard. Supports modules. More at m.hw.is

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Simple Logic Probe

author: Raedkit
Top
Bottom

2 layer board of 3.68 x 1.01 inches (93.4 x 25.7 mm)
Uploaded: October 24, 2013
Shared: October 24, 2013
Total Price: $18.60

Simple logic probe with resistors,transistors, and LEDs. The pin on the left side is for a probe which could just be a right-angle header pin. The right side is for a screw terminal for hooking in alligator clips,banana clips, etc. The transistors I used are 2N3906 for Q1, and 2N2906 for Q2. One …

Show full description

Simple logic probe with resistors,transistors, and LEDs. The pin on the left side is for a probe which could just be a right-angle header pin. The right side is for a screw terminal for hooking in alligator clips,banana clips, etc. The transistors I used are 2N3906 for Q1, and 2N2906 for Q2. One …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tinyboard

author: totof
Top
Bottom

2 layer board of 1.54 x 1.10 inches (39.0 x 27.9 mm)
Uploaded: October 23, 2013
Shared: October 24, 2013
Total Price: $8.45

attiny board V0.1

Warning : it's my first pcb !! not tested, feedback when received

more info :[email protected]

it's working !!

attiny board V0.1

Warning : it's my first pcb !! not tested, feedback when received

more info :[email protected]

it's working !!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SSOP20 Dumb Breakout

author: Surou
Top
Bottom

2 layer board of 0.99 x 0.75 inches (25.2 x 19.0 mm)
Uploaded: June 02, 2012
Shared: October 24, 2013
Total Price: $3.70

SSOP20

SSOP20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GIMME r1261

author: mossmann
Top
Bottom

2 layer board of 1.47 x 1.72 inches (37.2 x 43.6 mm)
Uploaded: September 19, 2012
Shared: October 23, 2013
Total Price: $12.55

Spring pin adapter for programming an IM-Me with a GoodFET.

http://sourceforge.net/p/goodfet/code/HEAD/tree/contrib/gimme/

Spring pin adapter for programming an IM-Me with a GoodFET.

http://sourceforge.net/p/goodfet/code/HEAD/tree/contrib/gimme/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UNRom 512+

author: caitsith2
Top
Bottom

2 layer board of 3.94 x 2.99 inches (100.1 x 76.0 mm)
Uploaded: October 23, 2013
Shared: October 23, 2013
Total Price: $58.90

The board has the following capabilities:

  • 512K PRG rom
  • 32K CHR Ram
  • self-flashing (no need for a battery)
  • On the fly mirroring mode change
    • Horizontal
    • Vertical
    • One-Screen

The original version of the board, as seen in Battle Kid 2, and other upcoming games, does no…

Show full description

The board has the following capabilities:

  • 512K PRG rom
  • 32K CHR Ram
  • self-flashing (no need for a battery)
  • On the fly mirroring mode change
    • Horizontal
    • Vertical
    • One-Screen

The original version of the board, as seen in Battle Kid 2, and other upcoming games, does no…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CoCoEPROMpak 1.0

author: NF6X
Top
Bottom

2 layer board of 2.11 x 1.76 inches (53.5 x 44.6 mm)
Uploaded: September 27, 2013
Shared: October 23, 2013
Total Price: $18.45

4k-64k EPROM-based Cartridge for Tandy/TRS-80 Color Computer.

See <http://www.nf6x.net/tag/cocoeprompak/> for more details.

All design files available at <https://github.com/NF6X/CoCoEPROMpak> under GPLv3 license.

4k-64k EPROM-based Cartridge for Tandy/TRS-80 Color Computer.

See <http://www.nf6x.net/tag/cocoeprompak/> for more details.

All design files available at <https://github.com/NF6X/CoCoEPROMpak> under GPLv3 license.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Snes Tototek Adapter Dip v2

author: Helder
Top
Bottom

2 layer board of 1.12 x 1.42 inches (28.4 x 35.9 mm)
Uploaded: October 23, 2013
Shared: October 23, 2013
Total Price: $7.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TLC5947 Breakout

author: RossRobotics
Top
Bottom

2 layer board of 1.85 x 1.64 inches (47.0 x 41.6 mm)
Uploaded: April 01, 2013
Shared: October 22, 2013
Total Price: $15.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Relay Board

author: RossRobotics
Top
Bottom

2 layer board of 3.35 x 3.94 inches (85.1 x 100.0 mm)
Uploaded: April 21, 2013
Shared: October 22, 2013
Total Price: $65.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mightyboard RevE

author: RossRobotics
Top
Bottom

2 layer board of 6.03 x 4.69 inches (153.1 x 119.2 mm)
Uploaded: October 22, 2013
Shared: October 22, 2013
Total Price: $141.40

Replicator Mightyboard RevE

Replicator Mightyboard RevE

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Usb Breadboard Adapter

author: Duke
Top
Bottom

2 layer board of 0.73 x 0.46 inches (18.6 x 11.7 mm)
Uploaded: October 22, 2013
Shared: October 22, 2013
Total Price: $1.65

Usb adapter includes diodes and resistors allowing direct routing to AVR pins.

Usb adapter includes diodes and resistors allowing direct routing to AVR pins.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy