AC Detect
2 layer board of 0.98 x 0.98 inches (25.0 x 25.0 mm)
Uploaded:
September 24, 2024
Shared:
September 24, 2024
Total Price:
$4.80
Non contact AC power detection circuit. Powered by +3.3V and produces an active low output. Suitable for interfacing with RPI, Arduino, etc.
Non contact AC power detection circuit. Powered by +3.3V and produces an active low output. Suitable for interfacing with RPI, Arduino, etc.
METCAL_RFG30_LED
2 layer board of 0.99 x 0.33 inches (25.1 x 8.4 mm)
Uploaded:
March 15, 2024
Shared:
March 22, 2024
Total Price:
$1.60
This board replaces the small incandescent light bulb in the original Metcal soldering station power supply (RFG-30 or STSS-001). Use either white LEDs or yellow/red LEDs to illuminate the Metcal logo in the front cover. LEDs and current limiting resistors are 1206 size. This board sees about 18V…
Show full description
This board replaces the small incandescent light bulb in the original Metcal soldering station power supply (RFG-30 or STSS-001). Use either white LEDs or yellow/red LEDs to illuminate the Metcal logo in the front cover. LEDs and current limiting resistors are 1206 size. This board sees about 18V…
Show full description
C315BEE
2 layer board of 2.01 x 1.81 inches (51.0 x 46.0 mm)
Uploaded:
April 19, 2021
Shared:
April 19, 2021
Total Price:
$18.15
The C315BEE audiophile amplifier uses an insane 20W in standby. When installed this small board will reduce standby power to well under 1W. A solid state relay is used to switch power to the main transformer.
The C315BEE audiophile amplifier uses an insane 20W in standby. When installed this small board will reduce standby power to well under 1W. A solid state relay is used to switch power to the main transformer.
ABC
2 layer board of 1.50 x 0.75 inches (38.1 x 19.1 mm)
Uploaded:
February 19, 2014
Shared:
February 19, 2014
Total Price:
$5.60
Automatic Blind Controller. Based on LPC812 Cortex-M0+. The micro wakes up, senses light via CDS photocell and controls an RC servo installed in Venetian blinds. Includes pushbutton and RGB led. Designed for standby current of < 200uA.
Automatic Blind Controller. Based on LPC812 Cortex-M0+. The micro wakes up, senses light via CDS photocell and controls an RC servo installed in Venetian blinds. Includes pushbutton and RGB led. Designed for standby current of < 200uA.