BGA Test v0.1
author: Max
2 layer board of 1.97 x 1.97 inches (50.0 x 50.0 mm)
Uploaded:
July 26, 2014
Shared:
November 24, 2014
Total Price:
$19.35
Round(!) 2-layer PCB with lots of LEDs I did this board to test if it was possible to mount a micro controller with BGA footprint on a 2-layer PCB at home, and it worked :-) There are 36 blue LEDs and 4 red LEDs that are individually controlled from GPIO on the AVR micro controller. There is al…
Show full description
Round(!) 2-layer PCB with lots of LEDs I did this board to test if it was possible to mount a micro controller with BGA footprint on a 2-layer PCB at home, and it worked :-) There are 36 blue LEDs and 4 red LEDs that are individually controlled from GPIO on the AVR micro controller. There is al…
Show full description
ATtiny85/45/25 LED-Board
2 layer board of 0.55 x 0.69 inches (14.0 x 17.5 mm)
Uploaded:
November 24, 2014
Shared:
November 24, 2014
Total Price:
$1.85
Small ATtiny85-development-board. Onboard LDO, driver and resistors. Infos at www.Eifel-Modellbau.de
Small ATtiny85-development-board. Onboard LDO, driver and resistors. Infos at www.Eifel-Modellbau.de
PawelBot Connection Board
author: fhunleth
2 layer board of 1.07 x 0.77 inches (27.1 x 19.5 mm)
Uploaded:
November 19, 2014
Shared:
November 24, 2014
Total Price:
$4.05
Simple board for connecting the servos and batteries to the Arduino on a PawelBot. This simplifies much of the soldering needed to get a PawelBot up and running the first time.
Simple board for connecting the servos and batteries to the Arduino on a PawelBot. This simplifies much of the soldering needed to get a PawelBot up and running the first time.
LSF0108LogicLevelTranslator.v01
2 layer board of 0.61 x 0.61 inches (15.4 x 15.4 mm)
Uploaded:
November 23, 2014
Shared:
November 23, 2014
Total Price:
$1.80
Small breadboard-friendly breakout board for Texas Instruments' LSF0108 logic level translator, which allows high-speed (>100 MHz), bi-directional, 5 V tolerant, multiple voltage translation stages on the same device.
Small breadboard-friendly breakout board for Texas Instruments' LSF0108 logic level translator, which allows high-speed (>100 MHz), bi-directional, 5 V tolerant, multiple voltage translation stages on the same device.
tripple xml pp
2 layer board of 0.75 x 0.75 inches (19.0 x 19.0 mm)
Uploaded:
November 11, 2013
Shared:
November 23, 2014
Total Price:
$2.80
Tripple Cree XML footprint with TCAP-4325 thermal connectors.
http://t.co/MAB503QO2i
Tripple Cree XML footprint with TCAP-4325 thermal connectors.
http://t.co/MAB503QO2i
TRIAC1A
author: MARLYNZ
2 layer board of 0.98 x 0.71 inches (24.8 x 18.0 mm)
Uploaded:
November 23, 2014
Shared:
November 23, 2014
Total Price:
$3.45
- Single Triac w/ Opto driver for uC interface
- Q1 ……… MMBT3904 (or SOT-23 equiv. )
- Opto1 …. MOC3062 ( or DIP-6 equiv. )
- L1,R5 …. 33uH, 33 ohm (optional RFC - use jumper wire to bypass)
- C1,R6 …. 0.1uF/250V, 39 ohm
- R5 …….. 10
- R2 …….. 220
- R1,R4 …. 1K
- R3…
Show full description
- Single Triac w/ Opto driver for uC interface
- Q1 ……… MMBT3904 (or SOT-23 equiv. )
- Opto1 …. MOC3062 ( or DIP-6 equiv. )
- L1,R5 …. 33uH, 33 ohm (optional RFC - use jumper wire to bypass)
- C1,R6 …. 0.1uF/250V, 39 ohm
- R5 …….. 10
- R2 …….. 220
- R1,R4 …. 1K
- R3…
Show full description
[outdated][untested] 17mm 7135 with Zener & dual-PWM v010
author: Red
2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded:
November 23, 2014
Shared:
November 23, 2014
Total Price:
$2.20
Replacement: https://oshpark.com/shared_projects/BiFm1nwn
Replacement: https://oshpark.com/shared_projects/BiFm1nwn
BaseShield
author: AdrianMen29
2 layer board of 2.69 x 2.10 inches (68.2 x 53.2 mm)
Uploaded:
November 22, 2014
Shared:
November 22, 2014
Total Price:
$28.10
Control bluetooth board
Control bluetooth board
[outdated?] 22mm A22-7135 (22mm 7135) v021
author: Red
2 layer board of 0.88 x 0.88 inches (22.3 x 22.3 mm)
Uploaded:
November 22, 2014
Shared:
November 22, 2014
Total Price:
$3.80
Replacement? - https://oshpark.com/shared_projects/CUshrRzj
0805 sized resistors & caps.
Requires that the positions marked 7135-A and 7135-B have at least one 7135 populated each. Requires that the 7135 next to R2 be populated for th…
Show full description
Replacement? - https://oshpark.com/shared_projects/CUshrRzj
0805 sized resistors & caps.
Requires that the positions marked 7135-A and 7135-B have at least one 7135 populated each. Requires that the 7135 next to R2 be populated for th…
Show full description
9 LED Board
author: schizobovine
2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded:
November 22, 2014
Shared:
November 22, 2014
Total Price:
$3.10
For 5mm PTH LEDs, split into two circuits (5 for the white channel, 4 for the red channel).
For 5mm PTH LEDs, split into two circuits (5 for the white channel, 4 for the red channel).
CK's BU_CK V2.0.3
author: Cereal_Killer
2 layer board of 0.87 x 0.87 inches (22.1 x 22.1 mm)
Uploaded:
November 17, 2014
Shared:
November 22, 2014
Total Price:
$3.75
22mm MAX16820 based buck driver with AVR controller and toroidal inductor
Circuit design run's however I havent yet received either of these boards so order at your own risk till I can verify the boards are correct and the toroid works- at that point I'm sure there will be revisions.
22mm MAX16820 based buck driver with AVR controller and toroidal inductor
Circuit design run's however I havent yet received either of these boards so order at your own risk till I can verify the boards are correct and the toroid works- at that point I'm sure there will be revisions.
