Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Open BLDC Hardware - Power_Driver board v0.3

author: Warhawk
Top
Bottom

4 layer board of 1.91 x 0.83 inches (48.5 x 21.0 mm)
Uploaded: November 17, 2014
Shared: November 17, 2014
Total Price: $15.70

Open BLDC Hardware - Power_Driver board v0.3

http://open-bldc.org/wiki/Open-BLDC

4 layer board of 1.91x0.83 inches (49x21mm). $15.70 for three.

Open BLDC Hardware - Power_Driver board v0.3

http://open-bldc.org/wiki/Open-BLDC

4 layer board of 1.91x0.83 inches (49x21mm). $15.70 for three.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Open BLDC Hardware - Power board v0.3

author: Warhawk
Top
Bottom

4 layer board of 2.74 x 1.18 inches (69.5 x 30.0 mm)
Uploaded: November 17, 2014
Shared: November 17, 2014
Total Price: $32.30

Open BLDC Hardware - Power board v0.3

http://open-bldc.org/wiki/Open-BLDC

4 layer board of 2.74x1.18 inches (70x30mm). $32.30 for three.

Open BLDC Hardware - Power board v0.3

http://open-bldc.org/wiki/Open-BLDC

4 layer board of 2.74x1.18 inches (70x30mm). $32.30 for three.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Open BLDC Hardware - Logic board v0.3

author: WarHawk-AVG
Top
Bottom

4 layer board of 1.79 x 0.83 inches (45.5 x 21.0 mm)
Uploaded: November 17, 2014
Shared: November 17, 2014
Total Price: $14.80

Open BLDC Hardware - Logic board v0.3

http://open-bldc.org/wiki/Open-BLDC

4 layer board of 1.79x0.83 inches (46x21mm). $14.80 for three.

Open BLDC Hardware - Logic board v0.3

http://open-bldc.org/wiki/Open-BLDC

4 layer board of 1.79x0.83 inches (46x21mm). $14.80 for three.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IR servo controller, arduino compatible

author: marc-cryan
Top
Bottom

2 layer board of 3.92 x 1.77 inches (99.5 x 44.9 mm)
Uploaded: April 28, 2013
Shared: November 17, 2014
Total Price: $34.55

Arduino compatible board (dip) with 10 screw headers, 4 3-pin headers for hobby servos, voltage regulator, battery connection, and an IR transceiver. CRANE_3_IR

Designed for IR controlled crane game.

Control 4 hobby servos with a TV remote.

Arduino compatible board (dip) with 10 screw headers, 4 3-pin headers for hobby servos, voltage regulator, battery connection, and an IR transceiver. CRANE_3_IR

Designed for IR controlled crane game.

Control 4 hobby servos with a TV remote.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Servo connectors with screw terminals.

author: marc-cryan
Top
Bottom

2 layer board of 1.42 x 0.87 inches (36.0 x 22.0 mm)
Uploaded: May 01, 2013
Shared: November 17, 2014
Total Price: $6.10

Connect 2 hobby servos to wires.
3 pin headers for servos 4 screw terminal for wires (power, ground, signal 1, signal 2)

Servo_Jack_X1

Connect 2 hobby servos to wires.
3 pin headers for servos 4 screw terminal for wires (power, ground, signal 1, signal 2)

Servo_Jack_X1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Data logger with accelerometer, arduino compatible

author: marc-cryan
Top
Bottom

2 layer board of 1.26 x 0.81 inches (32.0 x 20.6 mm)
Uploaded: November 17, 2014
Shared: November 17, 2014
Total Price: $5.10

Arduino bassed open log datta logger with SD card and accelerometer. XLog_X03

Arduino bassed open log datta logger with SD card and accelerometer. XLog_X03

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SideScanSonar

author: Max
Top
Bottom

2 layer board of 1.58 x 0.99 inches (40.0 x 25.0 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $7.75

Power module v1.0

Power module v1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SideScanSonar

author: Max
Top
Bottom

2 layer board of 2.37 x 3.32 inches (60.3 x 84.3 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $39.35

COM Module

COM Module

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RJ11 Breakout Board

author: LightningStalker
Top
Bottom

2 layer board of 0.58 x 0.46 inches (14.6 x 11.6 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $1.30

Breakout board for the Amphenol 215875-3 and equivalients

Breakout board for the Amphenol 215875-3 and equivalients

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2.35mm Coaxial Power Connector Board

author: LightningStalker
Top
Bottom

2 layer board of 0.53 x 0.76 inches (13.5 x 19.3 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $2.00

Breakout board for a 2.35mm (0.7mm pin) Coaxial power connector
CUI PJ1-023 DigiKey PN# CP1-023-ND

Breakout board for a 2.35mm (0.7mm pin) Coaxial power connector
CUI PJ1-023 DigiKey PN# CP1-023-ND

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BASICduino V1.0REVb atmega328p-au

author: LukeJA
Top
Bottom

2 layer board of 2.45 x 2.14 inches (62.2 x 54.3 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $26.15

Bluetooth enabled arduino uno clone. Designed to work with HC-06 module. Custom firmware basic interpreter hence "basicduino".

Bluetooth enabled arduino uno clone. Designed to work with HC-06 module. Custom firmware basic interpreter hence "basicduino".

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Firmware Developers Only - 17mm DD+7135 v026

author: Red
Top
Bottom

2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $2.20

This board DOES NOT HAVE a fully featured FIRMWARE AVAILABLE. This board is not useful right now unless you are a programmer.

This board is untested. The top section should be largely identical to the A17DD-SO8.

This board requires a Power-SO8 footprint N-Channel FET such as PSMN3R0-30YL…

Show full description

This board DOES NOT HAVE a fully featured FIRMWARE AVAILABLE. This board is not useful right now unless you are a programmer.

This board is untested. The top section should be largely identical to the A17DD-SO8.

This board requires a Power-SO8 footprint N-Channel FET such as PSMN3R0-30YL…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[outdated] Firmware Developers Only - 17mm DD+7135 v024

author: Red
Top
Bottom

2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $2.20

https://oshpark.com/shared_projects/7FzwbScm

This board DOES NOT HAVE a fully featured FIRMWARE AVAILABLE. This board is not useful right now unless you are a programmer.

This board is untested. The top section should be identical to the A17DD-SO8.

This board requires a Power-SO8 foot…

Show full description

https://oshpark.com/shared_projects/7FzwbScm

This board DOES NOT HAVE a fully featured FIRMWARE AVAILABLE. This board is not useful right now unless you are a programmer.

This board is untested. The top section should be identical to the A17DD-SO8.

This board requires a Power-SO8 foot…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Guitar/Bass Simple Preamp with Sockets

author: jronen
Top
Bottom

2 layer board of 1.91 x 1.51 inches (48.4 x 38.2 mm)
Uploaded: October 23, 2014
Shared: November 16, 2014
Total Price: $14.35

A simple pre-amplifier for guitar or bass with variable gain.

For use both with SMT or PTH resistors and capacitors, a power supply of +/- 5V up to +/- 15V (hint: an ATX power supply of any PC has +/- 12V), and a dual opamp such as NE5532, OPA1642, OP284, etc.

See https://github.com/jonrone…

Show full description

A simple pre-amplifier for guitar or bass with variable gain.

For use both with SMT or PTH resistors and capacitors, a power supply of +/- 5V up to +/- 15V (hint: an ATX power supply of any PC has +/- 12V), and a dual opamp such as NE5532, OPA1642, OP284, etc.

See https://github.com/jonrone…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NetPLC

author: mirage335
Top
Bottom

2 layer board of 2.89 x 2.44 inches (73.3 x 61.9 mm)
Uploaded: November 16, 2014
Shared: November 16, 2014
Total Price: $35.15

Advanced multi-peripherial low-power Networked Programmable Logic Controller (NetPLC) core platform.

Advanced multi-peripherial low-power Networked Programmable Logic Controller (NetPLC) core platform.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TpDoubler

author: dkemppai
Top
Bottom

2 layer board of 0.85 x 0.33 inches (21.6 x 8.4 mm)
Uploaded: November 15, 2014
Shared: November 15, 2014
Total Price: $1.40

Thermopile voltage doubler

Thermopile voltage doubler

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SSR-6Tr Adapter

author: dkemppai
Top
Bottom

2 layer board of 0.50 x 1.13 inches (12.7 x 28.6 mm)
Uploaded: November 03, 2014
Shared: November 15, 2014
Total Price: $2.80

SSR-6Tr GPS Adapter Board

SSR-6Tr GPS Adapter Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Earassistible

author: Blueberry
Top
Bottom

2 layer board of 3.49 x 2.00 inches (88.6 x 50.8 mm)
Uploaded: November 15, 2014
Shared: November 15, 2014
Total Price: $34.85

This is an implementation of a hearing aid circuit as presented on radiofun232's YouTube channel.

The goal is an inexpensive, open source, battery powered amplifier that takes a signal from a condenser microphone and drives an earphone to help people who are ha…

Show full description

This is an implementation of a hearing aid circuit as presented on radiofun232's YouTube channel.

The goal is an inexpensive, open source, battery powered amplifier that takes a signal from a condenser microphone and drives an earphone to help people who are ha…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NWT

author: om7avr
Top
Bottom

2 layer board of 4.93 x 3.95 inches (125.1 x 100.3 mm)
Uploaded: March 20, 2013
Shared: November 15, 2014
Total Price: $97.25

Wobler

Wobler

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLDC4

author: klempnertommy
Top
Bottom

4 layer board of 1.52 x 2.33 inches (38.7 x 59.2 mm)
Uploaded: November 15, 2014
Shared: November 15, 2014
Total Price: $35.40

BLDC

BLDC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy