Shared Projects

Shared Projects

SMS To Mega Drive/Genesis

author: RazorX
Top
Bottom

2 layer board of 3.66 x 1.77 inches (93.0 x 45.0 mm)
Uploaded: August 20, 2015
Shared: August 20, 2015
Total Price: $32.40

This is a sms to mega drive/genesis converter designed by raphnet technologies.

Allows you to play sega master system cartridges on the sega mega drive/genesis console.

This is a sms to mega drive/genesis converter designed by raphnet technologies.

Allows you to play sega master system cartridges on the sega mega drive/genesis console.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Si570 Oscillator and Filter selector

author: N8VET
Top
Bottom

2 layer board of 3.94 x 1.90 inches (100.0 x 48.2 mm)
Uploaded: August 20, 2015
Shared: August 20, 2015
Total Price: $37.30

LOSC and automatic filter switching For Avala-01 SDR

LOSC and automatic filter switching For Avala-01 SDR

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLEKey

author: EvilMog
Top
Bottom

2 layer board of 0.67 x 1.20 inches (16.9 x 30.5 mm)
Uploaded: August 18, 2015
Shared: August 20, 2015
Total Price: $3.95

Bluetooth Low Energy Wiegand Key

Bluetooth Low Energy Wiegand Key

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SparkBot: Photoresistor

author: nrobinson2000
Top
Bottom

2 layer board of 0.40 x 0.40 inches (10.0 x 10.0 mm)
Uploaded: July 31, 2015
Shared: August 20, 2015
Total Price: $0.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SparkBot: RGB Button

Top
Bottom

2 layer board of 0.59 x 0.79 inches (15.0 x 20.0 mm)
Uploaded: July 31, 2015
Shared: August 20, 2015
Total Price: $2.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SparkBot: Dual RGB

Top
Bottom

2 layer board of 0.47 x 0.79 inches (12.0 x 20.0 mm)
Uploaded: July 31, 2015
Shared: August 20, 2015
Total Price: $1.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Beta CMV12k ZIF Sensor v0.18

author: apertus
Top
Bottom

4 layer board of 2.26 x 2.26 inches (57.3 x 57.3 mm)
Uploaded: June 24, 2015
Shared: August 20, 2015
Total Price: $50.80

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Beta CMV12k ZIF Sensor v0.18 [nm]

author: apertus
Top
Bottom

4 layer board of 2.26 x 2.26 inches (57.3 x 57.3 mm)
Uploaded: June 24, 2015
Shared: August 20, 2015
Total Price: $50.80

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18 [no mask]

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18 [no mask]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Beta CMV12k ZIF Sensor v0.18 [e]

author: apertus
Top
Bottom

4 layer board of 2.26 x 2.26 inches (57.3 x 57.3 mm)
Uploaded: June 24, 2015
Shared: August 20, 2015
Total Price: $50.80

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18 [epad]

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18 [epad]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Beta CMV12k ZIF Sensor v0.18 [e,nm]

author: apertus
Top
Bottom

4 layer board of 2.26 x 2.26 inches (57.3 x 57.3 mm)
Uploaded: June 24, 2015
Shared: August 20, 2015
Total Price: $50.80

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18 [epad, no mask]

Axiom Beta CMV12000 ZIF Socket Sensor Board v0.18 [epad, no mask]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ekho Mobile 2L Rev. B

author: siahman
Top
Bottom

2 layer board of 0.86 x 1.43 inches (21.9 x 36.3 mm)
Uploaded: February 27, 2015
Shared: August 20, 2015
Total Price: $6.15

Two layer version, new revision.

Two layer version, new revision.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CC1101 Rev. B

author: siahman
Top
Bottom

2 layer board of 1.07 x 0.55 inches (27.0 x 14.1 mm)
Uploaded: August 12, 2015
Shared: August 20, 2015
Total Price: $2.95

Tuned to 433MHz, very small, RF transceiver using TI's standard CC1101 module, and a chip antenna. Parts needed are listed in the schematic.

Tuned to 433MHz, very small, RF transceiver using TI's standard CC1101 module, and a chip antenna. Parts needed are listed in the schematic.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

20 Led

author: CuriousTech
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: July 31, 2015
Shared: August 20, 2015
Total Price: $5.00

A small 1" LED ring. 0805 LEDs, 12F1822 or 12F1571, etc. CR1216 battery, button, and a solder pad on top for hanging. This is a 6MB gif of it.

A small 1" LED ring. 0805 LEDs, 12F1822 or 12F1571, etc. CR1216 battery, button, and a solder pad on top for hanging. This is a 6MB gif of it.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266 Breakout Adapter

author: 8n1
Top
Bottom

2 layer board of 1.08 x 1.53 inches (27.5 x 38.8 mm)
Uploaded: August 20, 2015
Shared: August 20, 2015
Total Price: $8.25

ESP-07 & ESP-12(E/F) Breakout Adapter with on-board voltage regulator

Pictures

ESPS8266 Breakout Adapter - Version 1.1 ESPS8266 Breakout Adapter - Version 1.1 ![ESPS8266 Breakout Adapter - Version 1.1](http://i.i…

Show full description

ESP-07 & ESP-12(E/F) Breakout Adapter with on-board voltage regulator

Pictures

ESPS8266 Breakout Adapter - Version 1.1 ESPS8266 Breakout Adapter - Version 1.1 ![ESPS8266 Breakout Adapter - Version 1.1](http://i.i…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Punch+

author: eguth
Top
Bottom

2 layer board of 1.08 x 0.86 inches (27.3 x 21.9 mm)
Uploaded: August 01, 2015
Shared: August 20, 2015
Total Price: $4.60

mini clean guitar amplifier

mini clean guitar amplifier

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SerialCrossover

author: clisystems
Top
Bottom

2 layer board of 0.50 x 0.26 inches (12.7 x 6.5 mm)
Uploaded: August 19, 2015
Shared: August 19, 2015
Total Price: $0.60

Cross over for USB to TTL serial adapters.

3.3v,TX,RX,GND,5V

Becomes

3.3v,RX,TX,GND,5V or 3.3v,TX,GND,RX,5V

Cross over for USB to TTL serial adapters.

3.3v,TX,RX,GND,5V

Becomes

3.3v,RX,TX,GND,5V or 3.3v,TX,GND,RX,5V

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Hermes-Lite BCD/PTT Buffer w/5V Regulator v1.1

author: W3DRK
Top
Bottom

2 layer board of 2.10 x 1.20 inches (53.4 x 30.6 mm)
Uploaded: August 03, 2015
Shared: August 19, 2015
Total Price: $12.65

Provides galvanic isolation to protect FPGA and 5V linear regulator to back-feed the BeMicro CV so you can power everything from a single 12v or 13.8v supply.

Provides galvanic isolation to protect FPGA and 5V linear regulator to back-feed the BeMicro CV so you can power everything from a single 12v or 13.8v supply.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Inrush Limiter

author: izeman
Top
Bottom

2 layer board of 1.68 x 1.33 inches (42.6 x 33.8 mm)
Uploaded: February 24, 2015
Shared: August 19, 2015
Total Price: $11.15

ebike anti spark

ebike anti spark

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Memoryboard 4

author: FrankB
Top
Bottom

2 layer board of 0.73 x 1.42 inches (18.5 x 36.0 mm)
Uploaded: August 09, 2015
Shared: August 19, 2015
Total Price: $5.15

6x Jedec SOIC-8 Memory* (SPI RAM, Flash, EEprom..) for Teensy 3.x

*Check package-size (width)!

Chipselects on Pins 2,3,4

Parts list:

  • 1..6 SPI Memory SO-08
  • 1 x 74LCX126 SO14
  • 1 x 74LCX138 SO16
  • 6 x 100nF C0603
  • 3 x 10k R0603

<https://github.com/FrankBoesing/memoryboard>…

Show full description

6x Jedec SOIC-8 Memory* (SPI RAM, Flash, EEprom..) for Teensy 3.x

*Check package-size (width)!

Chipselects on Pins 2,3,4

Parts list:

  • 1..6 SPI Memory SO-08
  • 1 x 74LCX126 SO14
  • 1 x 74LCX138 SO16
  • 6 x 100nF C0603
  • 3 x 10k R0603

<https://github.com/FrankBoesing/memoryboard>…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZigBee Transceiver

author: SparksFly
Top
Bottom

4 layer board of 1.11 x 1.70 inches (28.1 x 43.3 mm)
Uploaded: August 19, 2015
Shared: August 19, 2015
Total Price: $18.80

Non-original design, CC2520-CC2591 module from TI; BOM is approximately $17.50,

https://www.digikey.com/classic/RegisteredUser/BOMBillOfMaterials.aspx?path=1&exist=1&id=2796905

Non-original design, CC2520-CC2591 module from TI; BOM is approximately $17.50,

https://www.digikey.com/classic/RegisteredUser/BOMBillOfMaterials.aspx?path=1&exist=1&id=2796905

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy