Shared Projects

Shared Projects

Breakout board - buttons and LEDs

author: Charlie
Top
Bottom

2 layer board of 2.10 x 0.90 inches (53.4 x 22.9 mm)
Uploaded: July 23, 2015
Shared: August 24, 2015
Total Price: $9.45

8 SMD push-buttons and 8 SMD LEDs. The LEDs are common cathode tied to ground through a current limiting resistor. The push buttons are pull-down to ground. You can get some informations about this on this page : https://hackaday.io/project/7188-8-buttons-8-leds-breakout-board

8 SMD push-buttons and 8 SMD LEDs. The LEDs are common cathode tied to ground through a current limiting resistor. The push buttons are pull-down to ground. You can get some informations about this on this page : https://hackaday.io/project/7188-8-buttons-8-leds-breakout-board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

zum scan

author: nikki81
Top
Bottom

2 layer board of 2.92 x 2.25 inches (74.2 x 57.1 mm)
Uploaded: August 24, 2015
Shared: August 24, 2015
Total Price: $32.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ledbrick pwm ble 0.2

author: theatrus
Top
Bottom

2 layer board of 2.11 x 1.76 inches (53.6 x 44.7 mm)
Uploaded: August 24, 2015
Shared: August 24, 2015
Total Price: $18.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AVR USBASP_PROGRAMMER V1.0

author: strongeye
Top
Bottom

2 layer board of 2.01 x 2.76 inches (51.0 x 70.0 mm)
Uploaded: August 24, 2015
Shared: August 24, 2015
Total Price: $27.60

A version of the classic Atmel ISP programmer by Thomas Fischl. This one supports 3.3V and 5V operation on the Programmer and Target and has Schottky ESD protection diodes on the 4 main lines for the ISP. A Low drop out regulator makes 3.3V from the 5V USB supplied voltage. Both 6 and 10 pin hea…

Show full description

A version of the classic Atmel ISP programmer by Thomas Fischl. This one supports 3.3V and 5V operation on the Programmer and Target and has Schottky ESD protection diodes on the 4 main lines for the ISP. A Low drop out regulator makes 3.3V from the 5V USB supplied voltage. Both 6 and 10 pin hea…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32 Nano Board v3

author: andyolivares
Top
Bottom

2 layer board of 2.45 x 0.77 inches (62.2 x 19.5 mm)
Uploaded: December 03, 2014
Shared: August 23, 2015
Total Price: $9.40

Small protoboard friendly STM32 board

Small protoboard friendly STM32 board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GeoCentinela v3.2

author: flipflop
Top
Bottom

2 layer board of 3.15 x 3.31 inches (80.0 x 84.0 mm)
Uploaded: December 12, 2014
Shared: August 23, 2015
Total Price: $52.05

triaxial geophone data logger

triaxial geophone data logger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GpsMod v1.0

author: flipflop
Top
Bottom

2 layer board of 1.18 x 1.05 inches (30.0 x 26.6 mm)
Uploaded: December 13, 2014
Shared: August 23, 2015
Total Price: $6.15

gps module with pps

gps module with pps

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pushbuttonv1

author: voodoofish
Top
Bottom

2 layer board of 0.95 x 1.05 inches (24.1 x 26.7 mm)
Uploaded: June 19, 2012
Shared: August 22, 2015
Total Price: $4.95

pushbuttonator

pushbuttonator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NRF24_MSP430Adapter

author: voodoofish
Top
Bottom

2 layer board of 1.08 x 1.65 inches (27.4 x 41.9 mm)
Uploaded: August 06, 2015
Shared: August 22, 2015
Total Price: $8.90

Integrated adapter board for msp4302452 and nrf2401+ (or SI24)Tranciever. 3 IO are broken out, 3 pins output LED signals and 2 buttons with 1 that can be switched between reset and another button. Uses the FAN2512S33 LDO Vreg.

Integrated adapter board for msp4302452 and nrf2401+ (or SI24)Tranciever. 3 IO are broken out, 3 pins output LED signals and 2 buttons with 1 that can be switched between reset and another button. Uses the FAN2512S33 LDO Vreg.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BumBuzzPot

author: pmurray47
Top
Bottom

2 layer board of 1.92 x 1.20 inches (48.8 x 30.5 mm)
Uploaded: June 25, 2014
Shared: August 22, 2015
Total Price: $11.50

Fuzz

Fuzz

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp07pin

author: lamloei.com
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: August 22, 2015
Shared: August 22, 2015
Total Price: $5.00

esp07pin

esp07pin

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tag-Connect adapter for Silabs C2/JTAG

author: Klemetsson
Top
Bottom

2 layer board of 1.66 x 1.19 inches (42.3 x 30.3 mm)
Uploaded: September 15, 2014
Shared: August 22, 2015
Total Price: $9.90

Programming adapter for the Silicon Labs C2/JTAG programming interface. It has two connectors for Tag-Connect TC2030-MCP cables with different pin-outs. One supports C2 pin-sharing or JTAG and the other has an additional 3.3V and the 6.5V voltage required for OTP NVM burn.

**Details and BOM ca…

Show full description

Programming adapter for the Silicon Labs C2/JTAG programming interface. It has two connectors for Tag-Connect TC2030-MCP cables with different pin-outs. One supports C2 pin-sharing or JTAG and the other has an additional 3.3V and the 6.5V voltage required for OTP NVM burn.

**Details and BOM ca…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy 3.x Connectorboard

author: FrankB
Top
Bottom

2 layer board of 0.70 x 1.00 inches (17.7 x 25.3 mm)
Uploaded: August 06, 2015
Shared: August 22, 2015
Total Price: $3.45

Teensy 3.x Connectorboard

License

Creative Commons Attribution-ShareAlike 4.0 International License

Teensy 3.x Connectorboard

License

Creative Commons Attribution-ShareAlike 4.0 International License

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SMA_HPF

author: ka6sox
Top
Bottom

2 layer board of 1.20 x 0.47 inches (30.5 x 11.9 mm)
Uploaded: August 22, 2015
Shared: August 22, 2015
Total Price: $2.80

SMA High Pass Filter

SMA High Pass Filter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TO220 3v3 step down

author: julbouln
Top
Bottom

2 layer board of 0.40 x 0.65 inches (10.2 x 16.5 mm)
Uploaded: August 01, 2015
Shared: August 21, 2015
Total Price: $1.30

LM3671 simple 3v3 step-down board

LM3671 simple 3v3 step-down board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Greg's Simple 8 LED board

author: JustForFun
Top
Bottom

2 layer board of 1.18 x 2.50 inches (29.9 x 63.6 mm)
Uploaded: August 21, 2015
Shared: August 21, 2015
Total Price: $14.70

Simple 8 LED board for quick Arduino breadboard setup.

Simple 8 LED board for quick Arduino breadboard setup.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GSU General Board

author: JustForFun
Top
Bottom

2 layer board of 3.94 x 3.15 inches (100.0 x 80.0 mm)
Uploaded: July 20, 2015
Shared: August 21, 2015
Total Price: $62.00

A generic start board to be used when setting up a new Arduino project. The board has 8 LEDs, 4 on/off switches, 2 push buttons, and 2 rotary encoders. It also incorporates resisters for the LEDs, and pull up/pull down resisters for the switches.

A generic start board to be used when setting up a new Arduino project. The board has 8 LEDs, 4 on/off switches, 2 push buttons, and 2 rotary encoders. It also incorporates resisters for the LEDs, and pull up/pull down resisters for the switches.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LaunchPad Flight Controller BoosterPack

author: Lauszus
Top
Bottom

2 layer board of 2.16 x 2.20 inches (54.8 x 55.9 mm)
Uploaded: August 21, 2015
Shared: August 21, 2015
Total Price: $23.70

Blog post: <http://blog.tkjelectronics.dk/2015/08/bachelors-thesis-launchpad-flight-controller>

Source code: <https://github.com/Lauszus/LaunchPadFlightController>

Blog post: <http://blog.tkjelectronics.dk/2015/08/bachelors-thesis-launchpad-flight-controller>

Source code: <https://github.com/Lauszus/LaunchPadFlightController>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ad2usb-lora-hat

author: mathewss
Top
Bottom

2 layer board of 1.42 x 0.93 inches (36.2 x 23.7 mm)
Uploaded: August 21, 2015
Shared: August 21, 2015
Total Price: $6.60

AD2USB LoRa HAT

AD2USB LoRa HAT

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

attinytemp1

author: spro
Top
Bottom

2 layer board of 1.39 x 0.69 inches (35.3 x 17.5 mm)
Uploaded: August 05, 2015
Shared: August 21, 2015
Total Price: $4.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy