Shared Projects

Shared Projects

Laser Power Adapter v9

author: Laser-Lance
Top
Bottom

2 layer board of 1.15 x 0.79 inches (29.2 x 20.0 mm)
Uploaded: January 21, 2023
Shared: January 21, 2023
Total Price: $4.50

This is an interface board that allows the PWM signal from an Ender5 3D printer to be used to control a laser output. Two throughole resisters are required; an 18KOhm and 4.7KOhm, which will bring the PWM signal down to TTL level that the laser accepts.

This is an interface board that allows the PWM signal from an Ender5 3D printer to be used to control a laser output. Two throughole resisters are required; an 18KOhm and 4.7KOhm, which will bring the PWM signal down to TTL level that the laser accepts.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

banana-to-usb-a adapter

author: baldengineer
Top
Bottom

2 layer board of 1.03 x 1.05 inches (26.1 x 26.6 mm)
Uploaded: January 20, 2023
Shared: January 20, 2023
Total Price: $5.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card: MU1D

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: January 20, 2023
Shared: January 20, 2023
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card: 40745B Ankle Ecoder

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: January 20, 2023
Shared: January 20, 2023
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GN-IGS-1520

author: seth.powers
Top
Bottom

2 layer board of 1.45 x 2.38 inches (36.8 x 60.4 mm)
Uploaded: January 20, 2023
Shared: January 20, 2023
Total Price: $17.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

picostation_pcb_v1.0.0

author: XFiX
Top
Bottom

2 layer board of 2.20 x 3.30 inches (55.9 x 83.8 mm)
Uploaded: January 19, 2023
Shared: January 20, 2023
Total Price: $36.30

Picostation - a PSX ODE using a Raspberry Pi Pico.

Picostation - a PSX ODE using a Raspberry Pi Pico.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

diobd2022.kicad_pcb

author: steve-t
Top
Bottom

2 layer board of 2.10 x 0.60 inches (53.3 x 15.2 mm)
Uploaded: January 20, 2023
Shared: January 20, 2023
Total Price: $6.30

This is a "digital I/O tester" and proto board for the 3-pin DIO and PWM headers commonly used in FIRST Robotics and elsewhere. It includes LEDs that monitor power (yellow) and signal state (red). Also, a tiny proto area is included for custom circuits.

This is a "digital I/O tester" and proto board for the 3-pin DIO and PWM headers commonly used in FIRST Robotics and elsewhere. It includes LEDs that monitor power (yellow) and signal state (red). Also, a tiny proto area is included for custom circuits.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Analog Discover 2

author: waymond91
Top
Bottom

2 layer board of 1.90 x 2.10 inches (48.3 x 53.3 mm)
Uploaded: January 18, 2023
Shared: January 18, 2023
Total Price: $19.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breakout_B_rev2

author: sep0022
Top
Bottom

2 layer board of 4.50 x 3.00 inches (114.3 x 76.2 mm)
Uploaded: January 18, 2023
Shared: January 18, 2023
Total Price: $67.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breakout_A_rev2_gerbers

author: sep0022
Top
Bottom

2 layer board of 4.50 x 3.00 inches (114.3 x 76.2 mm)
Uploaded: January 18, 2023
Shared: January 18, 2023
Total Price: $67.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

W9AC TDA2822D BTL Amplifier

author: W9AC
Top
Bottom

2 layer board of 0.90 x 0.68 inches (22.9 x 17.2 mm)
Uploaded: October 31, 2022
Shared: January 18, 2023
Total Price: $3.00

W9AC TDA2822D BTL Amplifier

W9AC TDA2822D BTL Amplifier

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Chameleon USB FX2

author: splash5
Top
Bottom

2 layer board of 2.45 x 1.55 inches (62.3 x 39.5 mm)
Uploaded: December 10, 2022
Shared: January 18, 2023
Total Price: $19.05

This is a redesign of Chameleon USB FX2 (cusbfx2). Board dimension and pin assignment are all the same as cusbfx2, but changing some parts and move all components to top layer.

You will need good sodering skill to complete this project.

**Lots of 0402 package resistors and capacitors need t…

Show full description

This is a redesign of Chameleon USB FX2 (cusbfx2). Board dimension and pin assignment are all the same as cusbfx2, but changing some parts and move all components to top layer.

You will need good sodering skill to complete this project.

**Lots of 0402 package resistors and capacitors need t…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CC2500_Mod_con

author: Netstar77
Top
Bottom

2 layer board of 1.60 x 1.50 inches (40.6 x 38.1 mm)
Uploaded: January 18, 2023
Shared: January 18, 2023
Total Price: $12.00

Set of adapter boards for CC2500 modules

Set of adapter boards for CC2500 modules

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MooLED 3.0 Final

author: Moo
Top
Bottom

2 layer board of 1.94 x 1.46 inches (49.3 x 37.1 mm)
Uploaded: January 16, 2023
Shared: January 16, 2023
Total Price: $14.15

The final, compact version of the MooLED NeoPixel controller powered by WLED.

The 74AHCT125 4-channel signal buffer has been replaced by a pair of single channel variants, and the GPIO pins used for data and relay signalling have been reverted to the defaults used by WLED for the ESP32 (GPIO 1…

Show full description

The final, compact version of the MooLED NeoPixel controller powered by WLED.

The 74AHCT125 4-channel signal buffer has been replaced by a pair of single channel variants, and the GPIO pins used for data and relay signalling have been reverted to the defaults used by WLED for the ESP32 (GPIO 1…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shutterbug V1.1

author: kitsu
Top
Bottom

2 layer board of 3.60 x 1.60 inches (91.4 x 40.6 mm)
Uploaded: January 15, 2023
Shared: January 15, 2023
Total Price: $28.80

Now with 100% more LEDs!

Now with 100% more LEDs!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

cTFT_MSP3218_Gerb

author: Jelly
Top
Bottom

2 layer board of 0.83 x 1.49 inches (21.1 x 37.7 mm)
Uploaded: January 15, 2023
Shared: January 15, 2023
Total Price: $6.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DriverPCB2

author: TannerTriplett
Top
Bottom

2 layer board of 4.33 x 2.95 inches (109.9 x 74.9 mm)
Uploaded: January 13, 2023
Shared: January 13, 2023
Total Price: $63.75

Three phase positional gimbal motor driver with magnetic encoder support. For control by Teensy 4.1/USB interface.

Three phase positional gimbal motor driver with magnetic encoder support. For control by Teensy 4.1/USB interface.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ground Mag Sensor Board

author: MoldwinMagLab
Top
Bottom

2 layer board of 1.54 x 2.70 inches (39.2 x 68.7 mm)
Uploaded: January 13, 2023
Shared: January 13, 2023
Total Price: $20.85

PCB to mount RM3100 and TM461. Added LR and changed routing design to reduce magnetic interference

PCB to mount RM3100 and TM461. Added LR and changed routing design to reduce magnetic interference

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SWTCHR-19er Project (v

author: jv1597
Top
Bottom

2 layer board of 1.11 x 0.71 inches (28.1 x 17.9 mm)
Uploaded: April 05, 2020
Shared: January 13, 2023
Total Price: $3.85

Shift register lab pcb

Shift register lab pcb

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OPLODR-19er (v.01)

author: jv1597
Top
Bottom

2 layer board of 0.53 x 0.65 inches (13.3 x 16.4 mm)
Uploaded: April 06, 2020
Shared: January 13, 2023
Total Price: $1.65

Lab pcb for ADG5419

Lab pcb for ADG5419

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy