babydriver
4 layer board of 0.59 x 0.39 inches (15.0 x 10.0 mm)
Uploaded:
June 22, 2025
Shared:
June 22, 2025
Total Price:
$2.30
A small but capable force feedback board for use with GUN4IR and OpenFIRE light guns.
License: CC BY-SA 4.0
| Reference | Part desc / number | Notes | |———-|—-…
Show full description
A small but capable force feedback board for use with GUN4IR and OpenFIRE light guns.
License: CC BY-SA 4.0
| Reference | Part desc / number | Notes | |———-|—-…
Show full description
Wiimote IR Sensor - Inline (Panel) - v1.2
2 layer board of 0.51 x 1.77 inches (13.0 x 45.0 mm)
Uploaded:
June 21, 2025
Shared:
June 21, 2025
Total Price:
$4.50
Important: Order in 0.8mm thickness!
Allows interfacing with a Wiimote camera over I2C for use with GUN4IR and OpenFIRE light guns.
This project is a panel of two boards to prevent panel tabs from being automatically added in the recess for the camera module.
OpenFIRE requires only R1, R2,…
Show full description
Important: Order in 0.8mm thickness!
Allows interfacing with a Wiimote camera over I2C for use with GUN4IR and OpenFIRE light guns.
This project is a panel of two boards to prevent panel tabs from being automatically added in the recess for the camera module.
OpenFIRE requires only R1, R2,…
Show full description
Wiimote IR Sensor - Inline (Panel)
2 layer board of 0.52 x 1.26 inches (13.1 x 32.1 mm)
Uploaded:
April 27, 2024
Shared:
April 28, 2024
Total Price:
$3.25
Important: Order in 0.8mm thickness!
Allows interfacing with a Wiimote camera over I2C for GUN4IR.
This project is a panel of two boards to prevent panel tabs from being automatically added in the recess for the camera module.
BOM:
| Reference | Value | Link | |———–|——-|—…
Show full description
Important: Order in 0.8mm thickness!
Allows interfacing with a Wiimote camera over I2C for GUN4IR.
This project is a panel of two boards to prevent panel tabs from being automatically added in the recess for the camera module.
BOM:
| Reference | Value | Link | |———–|——-|—…
Show full description