K-rAd CVDecay_Rev2_g.zip
author: K-rAd
2 layer board of 2.76 x 4.26 inches (70.2 x 108.2 mm)
Uploaded:
November 19, 2017
Shared:
March 13, 2023
Total Price:
$58.80
a 2 channel decay envelope generator. the fixed instant attack is followed by a CV controllable/knob tune-able decay slope. can be very fast!
a 2 channel decay envelope generator. the fixed instant attack is followed by a CV controllable/knob tune-able decay slope. can be very fast!
K-rAd Casio Trigger-Mate.zip
author: K-rAd
2 layer board of 1.38 x 3.86 inches (35.1 x 98.1 mm)
Uploaded:
December 01, 2017
Shared:
March 13, 2023
Total Price:
$26.65
an interface for 5v trigger outputs to the Casio drum stick inputs on the Casio MT series synths. still not tested
an interface for 5v trigger outputs to the Casio drum stick inputs on the Casio MT series synths. still not tested
AliceStereoControlTWOREV7
author: K-rAd
2 layer board of 0.79 x 4.32 inches (20.1 x 109.8 mm)
Uploaded:
February 09, 2021
Shared:
March 13, 2023
Total Price:
$17.10
the control panel pcb for ALICE 3 dual gang pots, a 2D2T switch, and 4 jacks could be used for any circuit.
the control panel pcb for ALICE 3 dual gang pots, a 2D2T switch, and 4 jacks could be used for any circuit.
AliceStereoLimiterTWOREV8
author: K-rAd
2 layer board of 1.66 x 4.29 inches (42.1 x 108.8 mm)
Uploaded:
February 09, 2021
Shared:
March 13, 2023
Total Price:
$35.50
A stereo limiter based on a circuit from the classic british Alice console. Essentially the first portable recording console that almost all current mixers are based on. e.g. allen and heath, sound craft, mackie
A stereo limiter based on a circuit from the classic british Alice console. Essentially the first portable recording console that almost all current mixers are based on. e.g. allen and heath, sound craft, mackie
PI Power
author: TeelSys
2 layer board of 1.46 x 0.94 inches (37.0 x 24.0 mm)
Uploaded:
December 18, 2022
Shared:
March 12, 2023
Total Price:
$6.85
The board is based on the schematic developed by Mosaic Industries. A script for the Raspberry Pi is available at [https://github.com/richteel/pi-power-button](https://github.com/ric…
Show full description
The board is based on the schematic developed by Mosaic Industries. A script for the Raspberry Pi is available at [https://github.com/richteel/pi-power-button](https://github.com/ric…
Show full description
KOC Universal TT Sensor
author: progmem
2 layer board of 1.26 x 1.44 inches (32.0 x 36.5 mm)
Uploaded:
June 22, 2022
Shared:
March 12, 2023
Total Price:
$9.05
Universal replacement PCB for Konami's PS2-era USKOC, JKOC, and KASC IIDX controllers.
Comes with a 5-pin and 4-pin output. Two resistor pads are supplied for driving the emitters with the 4-pin connector. Suggest 0603 330ohm.
Compatible with JKOC and USKOC. Rohm RPI-441C1E suggested for use as…
Show full description
Universal replacement PCB for Konami's PS2-era USKOC, JKOC, and KASC IIDX controllers.
Comes with a 5-pin and 4-pin output. Two resistor pads are supplied for driving the emitters with the 4-pin connector. Suggest 0603 330ohm.
Compatible with JKOC and USKOC. Rohm RPI-441C1E suggested for use as…
Show full description
mixpre-dc-buddy-pcb
author: briandorsey
2 layer board of 0.87 x 0.53 inches (22.0 x 13.5 mm)
Uploaded:
February 24, 2023
Shared:
March 11, 2023
Total Price:
$2.30
PCB for a DIY MixPre DC power input with SD card access
https://github.com/briandorsey/mixpre-dc-buddy
PCB for a DIY MixPre DC power input with SD card access
https://github.com/briandorsey/mixpre-dc-buddy
MASv2.kicad_pcb
author: trent3211
2 layer board of 2.80 x 2.10 inches (71.1 x 53.3 mm)
Uploaded:
March 11, 2023
Shared:
March 11, 2023
Total Price:
$29.40
Magnitude analysis system for the Filter Frequency Response Visualizer of the SDSU Electrical and Computer Engineering Senior Design Team 18 (the Signal Sleuths)
Magnitude analysis system for the Filter Frequency Response Visualizer of the SDSU Electrical and Computer Engineering Senior Design Team 18 (the Signal Sleuths)
ffrv_powerbreakout.kicad_pcb
author: trent3211
2 layer board of 3.00 x 1.90 inches (76.2 x 48.3 mm)
Uploaded:
March 11, 2023
Shared:
March 11, 2023
Total Price:
$28.45
Power breakout board for the Filter Frequency Response Visualizer of the SDSU Electrical and Computer Engineering Senior Design Team 18 (the Signal Sleuths)
Power breakout board for the Filter Frequency Response Visualizer of the SDSU Electrical and Computer Engineering Senior Design Team 18 (the Signal Sleuths)
HDS_Microdesign
author: MushMotion
2 layer board of 1.07 x 0.49 inches (27.3 x 12.4 mm)
Uploaded:
March 09, 2023
Shared:
March 09, 2023
Total Price:
$2.60
Papra TH_eagle
author: PC
2 layer board of 1.77 x 2.58 inches (45.0 x 65.5 mm)
Uploaded:
March 08, 2023
Shared:
March 08, 2023
Total Price:
$22.80
DC Fan Control via potentiometer, powered from Milwaukee M12 battery. Uses Adafruit QT PY.
DC Fan Control via potentiometer, powered from Milwaukee M12 battery. Uses Adafruit QT PY.
M5Stamp ESP32S3 FlexyPin Adapter
author: jasoncoon
2 layer board of 0.90 x 2.65 inches (22.9 x 67.3 mm)
Uploaded:
February 22, 2023
Shared:
March 07, 2023
Total Price:
$11.90
A breadboard adapter for the M5Stamp ESP32S3 Module using FlexyPins, no module soldering needed!
More information on FlexyPins: [https://www.solder.party/docs/flexypin](ht…
Show full description
A breadboard adapter for the M5Stamp ESP32S3 Module using FlexyPins, no module soldering needed!
More information on FlexyPins: [https://www.solder.party/docs/flexypin](ht…
Show full description
Octopus PCB - Top
author: JayVincelli
2 layer board of 4.63 x 4.63 inches (117.6 x 117.6 mm)
Uploaded:
March 06, 2023
Shared:
March 06, 2023
Total Price:
$107.15
