bml_jlink2pmod_03
author: BlackMesaLabs
2 layer board of 1.30 x 0.70 inches (33.0 x 17.8 mm)
Uploaded:
September 21, 2025
Shared:
September 21, 2025
Total Price:
$4.50
Adapt Segger J-Link 1.27mm 2x5 header to standard FPGA 2x5 PMOD for JTAG and also two FTDI 1x6 Serial Ports.
Adapt Segger J-Link 1.27mm 2x5 header to standard FPGA 2x5 PMOD for JTAG and also two FTDI 1x6 Serial Ports.
bml_jtag2pmod_03
author: BlackMesaLabs
2 layer board of 1.30 x 0.70 inches (33.0 x 17.8 mm)
Uploaded:
September 21, 2025
Shared:
September 21, 2025
Total Price:
$4.50
Adapts a standard FPGA 2x6 0.100" PMOD connector to 2 FTDI 1x6 UART console ports plus either 1 FTDI 1x6 or 1 HS2/HS3 for JTAG use with openocd for RISC-V SoC debugger access.
Adapts a standard FPGA 2x6 0.100" PMOD connector to 2 FTDI 1x6 UART console ports plus either 1 FTDI 1x6 or 1 HS2/HS3 for JTAG use with openocd for RISC-V SoC debugger access.
Twonkie USB PD Sniffer v2.01
author: dojoe
4 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded:
February 06, 2023
Shared:
September 19, 2025
Total Price:
$10.00
A USB PD protocol sniffer and injector based on Google's Twinkie and optimized towards manufacturability by hand in one-off quantities. Now with EPR support!
GitHub project with design files, assembly instructions and firmware: https://github.com/dojoe/Twonkie
A USB PD protocol sniffer and injector based on Google's Twinkie and optimized towards manufacturability by hand in one-off quantities. Now with EPR support!
GitHub project with design files, assembly instructions and firmware: https://github.com/dojoe/Twonkie
ComsoftFixV4_Finished_Draft_Labeled_Complete_EXTRA_SMALL_09.19.2025
author: HaloSlayer255
2 layer board of 0.39 x 0.40 inches (9.9 x 10.2 mm)
Uploaded:
September 19, 2025
Shared:
September 19, 2025
Total Price:
$0.75
Yiru_SocialDoor_PCB
author: alexxai
2 layer board of 2.01 x 0.93 inches (51.2 x 23.6 mm)
Uploaded:
August 22, 2024
Shared:
September 18, 2025
Total Price:
$9.35
This is a social door PCB developed by Yiru Chen in the KravitzLab at Wash U
This is a social door PCB developed by Yiru Chen in the KravitzLab at Wash U
pulse-echo-pcb-mmcx
author: sahaskamat
2 layer board of 0.75 x 1.00 inches (19.0 x 25.4 mm)
Uploaded:
September 17, 2025
Shared:
September 17, 2025
Total Price:
$3.75
MMCX PCB for pulse echo ultrasound measurements.
MMCX PCB for pulse echo ultrasound measurements.
trainswitch_v3.kicad_pcb
author: mtrcycllvr
2 layer board of 1.63 x 2.28 inches (41.5 x 58.0 mm)
Uploaded:
September 08, 2025
Shared:
September 17, 2025
Total Price:
$18.65
Just a simple carrier for XIAO ESP32-C3 and a small motor driver along with power supplies for both the motor (semaphore signal) and logic.
Just a simple carrier for XIAO ESP32-C3 and a small motor driver along with power supplies for both the motor (semaphore signal) and logic.
SZ Color Lite PCB
author: Blitz
4 layer board of 2.76 x 4.81 inches (70.0 x 122.2 mm)
Uploaded:
September 11, 2025
Shared:
September 11, 2025
Total Price:
$132.60
Project created by SkimZor on Github, link is provided. The BOM file is also on that site.
*requires the CPU and RAM from a donor console as well.
Project created by SkimZor on Github, link is provided. The BOM file is also on that site.
*requires the CPU and RAM from a donor console as well.
dmux-x0x-trig-in.kicad_pcb
author: Sequentix
2 layer board of 0.37 x 0.32 inches (9.5 x 8.2 mm)
Uploaded:
September 11, 2025
Shared:
September 11, 2025
Total Price:
$0.60
tiny PCB to replace PNP transistor in TR808 or TR606 trigger circuits with SOT-23 PNP (BC807) and Schottky dual diode (BAT54C), for external trigger in connection.
tiny PCB to replace PNP transistor in TR808 or TR606 trigger circuits with SOT-23 PNP (BC807) and Schottky dual diode (BAT54C), for external trigger in connection.