Shared Projects

Shared Projects

You need to log in or sign up before continuing.
2 layer 4 layer 6 layer
Filter PCB layers

Footswitch3PDT - Rev204.kicad_pcb

author: Sanj
Top
Bottom

2 layer board of 1.63 x 0.70 inches (41.3 x 17.8 mm)
Uploaded: October 12, 2025
Shared: October 12, 2025
Total Price: $5.65

True bypass footswitch adapter board for guitar effects pedal projects. Includes provisions for single color LED with vertically mounted through-hole resistor, external DC power input jack with switched barrel (V+), optional 9V battery clip input and polarity protection diode. Effect input signal…

Show full description

True bypass footswitch adapter board for guitar effects pedal projects. Includes provisions for single color LED with vertically mounted through-hole resistor, external DC power input jack with switched barrel (V+), optional 9V battery clip input and polarity protection diode. Effect input signal…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BQFS-MM2B_Rev204.kicad_pcb

author: Sanj
Top
Bottom

2 layer board of 1.90 x 1.00 inches (48.3 x 25.4 mm)
Uploaded: October 12, 2025
Shared: October 12, 2025
Total Price: $9.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SimpleMix_4_8

author: PW3B-LPF-OS
Top
Bottom

2 layer board of 1.17 x 1.08 inches (29.7 x 27.4 mm)
Uploaded: October 12, 2025
Shared: October 12, 2025
Total Price: $6.30

Updated for TDK 1uF 63v caps to replace discontinued Wima 1uF 50v.

https://github.com/Passinwind/PW3B-LPF

Updated for TDK 1uF 63v caps to replace discontinued Wima 1uF 50v.

https://github.com/Passinwind/PW3B-LPF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fluke 8060 Low Frequency Beep.kicad_pcb

author: davetheresurrector
Top
Bottom

2 layer board of 0.92 x 0.55 inches (23.4 x 14.0 mm)
Uploaded: October 11, 2025
Shared: October 11, 2025
Total Price: $2.50

Version 2 board sounds twice as loud as v1. Board replaces Q6 on mainboard. Program U1 (PIC10F322) via ICSP header then cut off header. Same program as v1. Remove sounder LS1 from mainboard, solder a jumper across the pads to bring in +9V, wire LS1 to round pads on daughterboard and glue to m…

Show full description

Version 2 board sounds twice as loud as v1. Board replaces Q6 on mainboard. Program U1 (PIC10F322) via ICSP header then cut off header. Same program as v1. Remove sounder LS1 from mainboard, solder a jumper across the pads to bring in +9V, wire LS1 to round pads on daughterboard and glue to m…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SimpleGain_4_4

author: PW3B-LPF-OS
Top
Bottom

2 layer board of 1.17 x 0.92 inches (29.7 x 23.3 mm)
Uploaded: October 11, 2025
Shared: October 11, 2025
Total Price: $5.35

Updated for TDK 63v film caps to replace discontinued Wima 1uF 50v.

https://github.com/Passinwind/PW3B-LPF

Updated for TDK 63v film caps to replace discontinued Wima 1uF 50v.

https://github.com/Passinwind/PW3B-LPF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Kentavros Mini

author: mmolteratx
Top
Bottom

2 layer board of 2.10 x 2.68 inches (53.4 x 68.1 mm)
Uploaded: September 20, 2024
Shared: October 10, 2025
Total Price: $28.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

uni-con.kicad_pcb

author: CMR779
Top
Bottom

2 layer board of 4.45 x 1.69 inches (113.0 x 43.0 mm)
Uploaded: September 23, 2025
Shared: October 09, 2025
Total Price: $37.60

Universal controller board compatible with NES controller shells. Both sides of every button are exposed and independent of each other making it easy to make custom controllers for older game systems including the Atari 7800.

Universal controller board compatible with NES controller shells. Both sides of every button are exposed and independent of each other making it easy to make custom controllers for older game systems including the Atari 7800.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Switchbox Filter

author: burak_akel
Top
Bottom

2 layer board of 5.15 x 5.80 inches (130.9 x 147.4 mm)
Uploaded: October 08, 2025
Shared: October 08, 2025
Total Price: $149.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Digital HUD display 062925

author: apitkin
Top
Bottom

4 layer board of 0.82 x 0.28 inches (20.9 x 7.0 mm)
Uploaded: June 30, 2025
Shared: October 08, 2025
Total Price: $2.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

9DOF IMU featuring LSM6DSV320 (V3.0)

author: MorganS
Top
Bottom

2 layer board of 0.80 x 0.70 inches (20.3 x 17.8 mm)
Uploaded: July 22, 2025
Shared: October 08, 2025
Total Price: $2.75

This is a 9-degree-of-freedom (accelerometer/gyro/magnetometer) inertial measurement unit (IMU) utilizing the LSM6DSV320 chip which can measure up to 320g acceleration (20 times more than most other chips) as well as a LIS2MDL magnetometer.

This is a 9-degree-of-freedom (accelerometer/gyro/magnetometer) inertial measurement unit (IMU) utilizing the LSM6DSV320 chip which can measure up to 320g acceleration (20 times more than most other chips) as well as a LIS2MDL magnetometer.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Project Outputs for PCB_Project_EchoPoint

author: EchoPoint_Proj
Top
Bottom

2 layer board of 2.27 x 1.73 inches (57.7 x 43.8 mm)
Uploaded: October 08, 2025
Shared: October 08, 2025
Total Price: $19.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BRD-150-1 cad files

author: terrynoe
Top
Bottom

2 layer board of 4.00 x 2.00 inches (101.6 x 50.8 mm)
Uploaded: October 07, 2025
Shared: October 07, 2025
Total Price: $40.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

D2F to JST

author: TheRogueZeta
Top
Bottom

2 layer board of 0.50 x 0.25 inches (12.8 x 6.4 mm)
Uploaded: September 04, 2025
Shared: October 06, 2025
Total Price: $0.60

This PCB adapts an Omron D2F family micro switch to a standard JST 2 pin connector, making it easy to integrate mechanical switches into projects such as 3D printers or other electronics.

This PCB adapts an Omron D2F family micro switch to a standard JST 2 pin connector, making it easy to integrate mechanical switches into projects such as 3D printers or other electronics.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

light_APRS_v1_5.kicad_pcb

author: Daveman
Top
Bottom

2 layer board of 2.97 x 2.66 inches (75.5 x 67.5 mm)
Uploaded: October 05, 2025
Shared: October 05, 2025
Total Price: $39.45

Board that adds a 4AA battery back and external LED to a lightAPRS board.

Board that adds a 4AA battery back and external LED to a lightAPRS board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GoldenmateUPSr3

author: CuriousTech
Top
Bottom

2 layer board of 0.78 x 1.63 inches (19.8 x 41.4 mm)
Uploaded: October 04, 2025
Shared: October 04, 2025
Total Price: $6.35

Goldenmate UPS interface r3 (ESP32-S3 super mini version)

Goldenmate UPS interface r3 (ESP32-S3 super mini version)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Qnch_Prop_Test_fixture.kicad_pcb

author: R__J
Top
Bottom

2 layer board of 15.75 x 2.05 inches (400.0 x 52.1 mm)
Uploaded: October 03, 2025
Shared: October 03, 2025
Total Price: $161.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

T00850_REVA

author: pimios-nick
Top
Bottom

2 layer board of 1.61 x 1.90 inches (40.9 x 48.3 mm)
Uploaded: October 03, 2025
Shared: October 03, 2025
Total Price: $15.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LL Basic 2025.kicad_pcb

author: AnalogGuy
Top
Bottom

2 layer board of 1.38 x 1.65 inches (35.0 x 41.9 mm)
Uploaded: October 02, 2025
Shared: October 02, 2025
Total Price: $11.35

An adjustable current load 100µA to 10A. Named Larry Load for its originator, it is designed to fit in a 1590XX enclosure. See documentation at github/JRG-Analog/Larry_Load_2025

An adjustable current load 100µA to 10A. Named Larry Load for its originator, it is designed to fit in a 1590XX enclosure. See documentation at github/JRG-Analog/Larry_Load_2025

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card PCB - CAT HARNESSES

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: October 02, 2025
Shared: October 02, 2025
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPB Card PCB - AG103323

author: MakersBox
Top
Bottom

2 layer board of 2.03 x 0.87 inches (51.5 x 22.0 mm)
Uploaded: October 02, 2025
Shared: October 02, 2025
Total Price: $8.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy