One relay and Power Supply
author: BrK
2 layer board of 1.10 x 1.40 inches (27.9 x 35.6 mm)
Uploaded:
May 06, 2016
Shared:
May 06, 2016
Total Price:
$7.70
Power supply and one relay for my esp-07 board.
With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have…
Show full description
Power supply and one relay for my esp-07 board.
With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have…
Show full description
ESP-07 Breakout Board
author: BrK
2 layer board of 1.10 x 1.40 inches (27.9 x 35.6 mm)
Uploaded:
May 05, 2016
Shared:
May 05, 2016
Total Price:
$7.70
Simple main board for an ESP-07
It is working just fine. [email protected] for any questions.
Simple main board for an ESP-07
It is working just fine. [email protected] for any questions.
COPY: Onion DIP v2
author: fustini
2 layer board of 1.63 x 1.99 inches (41.4 x 50.4 mm)
Uploaded:
April 23, 2016
Shared:
May 05, 2016
Total Price:
$16.15
Created by JKW: https://bbs.nextthing.co/t/onion-dip-prototyping-on-the-chip-available/3279/85
Website: https://koljawindeler.github.io/CHIP_ONION/
Created by JKW: https://bbs.nextthing.co/t/onion-dip-prototyping-on-the-chip-available/3279/85
Website: https://koljawindeler.github.io/CHIP_ONION/
Lab Voltage Referance
author: Lincoln
2 layer board of 3.30 x 2.30 inches (83.8 x 58.5 mm)
Uploaded:
May 05, 2016
Shared:
May 05, 2016
Total Price:
$38.00
Bi-polar power supply for lab voltage referance.
Project Documentation:
http://ampmonkeys.com/?page=/Electronics/lab_voltage_referance.php
Bi-polar power supply for lab voltage referance.
Project Documentation:
http://ampmonkeys.com/?page=/Electronics/lab_voltage_referance.php
objeeREV2
author: lightningmar
2 layer board of 3.03 x 1.45 inches (76.8 x 36.8 mm)
Uploaded:
May 05, 2016
Shared:
May 05, 2016
Total Price:
$21.90
sUAS Flight Controller. 32 bit M0 microcontroller, sd logging, xbee for long range TX/RX, pitot, spi, and i2c breakouts for additional flexibility. See more at objeeAirlines.com
sUAS Flight Controller. 32 bit M0 microcontroller, sd logging, xbee for long range TX/RX, pitot, spi, and i2c breakouts for additional flexibility. See more at objeeAirlines.com
Lab Referance
author: Lincoln
4 layer board of 3.30 x 2.30 inches (83.8 x 58.5 mm)
Uploaded:
September 25, 2014
Shared:
May 05, 2016
Total Price:
$76.00
10.0000v reference + 150 ma driver
Project Information and Files:
http://ampmonkeys.com/?page=/Electronics/lab_voltage_referance.php"
10.0000v reference + 150 ma driver
Project Information and Files:
http://ampmonkeys.com/?page=/Electronics/lab_voltage_referance.php"
mesa_logic_dip_17.zip
author: BlackMesaLabs
2 layer board of 1.61 x 0.61 inches (40.8 x 15.4 mm)
Uploaded:
January 23, 2016
Shared:
May 05, 2016
Total Price:
$4.85
General purpose Lattice ICE5LP4K-SG48 FPGA board with 0.100" pitch 24 LVCMOS 3.3V user IOs. This was the Lizard Brain for a High Altitude Balloon that reached 31km. Google "HAB1 04.27.2016"
General purpose Lattice ICE5LP4K-SG48 FPGA board with 0.100" pitch 24 LVCMOS 3.3V user IOs. This was the Lizard Brain for a High Altitude Balloon that reached 31km. Google "HAB1 04.27.2016"
fpga_castellated_vias_16.zip
author: BlackMesaLabs
2 layer board of 0.96 x 0.71 inches (24.4 x 18.1 mm)
Uploaded:
February 17, 2016
Shared:
May 05, 2016
Total Price:
$3.40
Micro MinimOSD PDB
author: pfriedel
2 layer board of 1.42 x 1.42 inches (36.0 x 36.0 mm)
Uploaded:
May 05, 2016
Shared:
May 05, 2016
Total Price:
$10.05
Note: No clearance on standoffs is an almost guaranteed short circuit with metal standoffs. And the minim cutout is undersized. And why not have a 12v reg, since there's space. Anyway, don't use.
I like an OSD, but I hate wiring it. Put the Pololu reg on top or beneath the board. Fundam…
Show full description
Note: No clearance on standoffs is an almost guaranteed short circuit with metal standoffs. And the minim cutout is undersized. And why not have a 12v reg, since there's space. Anyway, don't use.
I like an OSD, but I hate wiring it. Put the Pololu reg on top or beneath the board. Fundam…
Show full description
SM Voltage Regulator
author: acraddoc91
2 layer board of 1.55 x 1.30 inches (39.4 x 33.0 mm)
Uploaded:
April 27, 2016
Shared:
May 05, 2016
Total Price:
$10.05
NonSMVoltageRegulator
author: acraddoc91
2 layer board of 1.55 x 1.45 inches (39.4 x 36.8 mm)
Uploaded:
April 27, 2016
Shared:
May 05, 2016
Total Price:
$11.20
R3powerV2.brd
author: anilinfotek
2 layer board of 1.97 x 2.95 inches (50.0 x 75.0 mm)
Uploaded:
May 04, 2016
Shared:
May 04, 2016
Total Price:
$29.05
