ATTiny85 Breakout
author: RafaelRiber
2 layer board of 0.86 x 0.47 inches (21.8 x 12.0 mm)
Uploaded:
February 13, 2016
Shared:
June 05, 2016
Total Price:
$2.00
Breakout for the Atmel ATTiny85-20SU. Fits perfectly on a breadboard.
Breakout for the Atmel ATTiny85-20SU. Fits perfectly on a breadboard.
MIDI BPM/Clock Generator
author: noisevoid
2 layer board of 2.96 x 1.58 inches (75.2 x 40.2 mm)
Uploaded:
June 05, 2016
Shared:
June 05, 2016
Total Price:
$23.35
This is a module for a tiny modular synth i am making. This module is a MIDI master clock generator with approximately 20 to 300 BPM. Can use and external 8-120Hz pulse as BPM source. Can also use internal BPM pulse as output.
Reference, Value, Footprint
- U3,4020,Housings_SOIC:SOIC-16…
Show full description
This is a module for a tiny modular synth i am making. This module is a MIDI master clock generator with approximately 20 to 300 BPM. Can use and external 8-120Hz pulse as BPM source. Can also use internal BPM pulse as output.
Reference, Value, Footprint
- U3,4020,Housings_SOIC:SOIC-16…
Show full description
Cherry MX Keypad
author: SyncChannelBlog
2 layer board of 4.30 x 1.00 inches (109.2 x 25.4 mm)
Uploaded:
June 04, 2016
Shared:
June 05, 2016
Total Price:
$21.50
<http://syncchannel.blogspot.com/2016/06/cherry-mx-keypad.html>
<http://syncchannel.blogspot.com/2016/06/cherry-mx-keypad.html>
ESP8266 Breakout
author: RafaelRiber
2 layer board of 1.02 x 0.47 inches (26.0 x 12.0 mm)
Uploaded:
February 13, 2016
Shared:
June 04, 2016
Total Price:
$2.40
FET for guitar or bass
author: Skeeter
2 layer board of 0.75 x 0.70 inches (19.0 x 17.8 mm)
Uploaded:
May 25, 2016
Shared:
June 04, 2016
Total Price:
$2.60
FET preamp untested with no parts values
why is it being shared? just because
FET preamp untested with no parts values
why is it being shared? just because
1117 SO8 Fixer
author: MLange
2 layer board of 0.31 x 0.33 inches (7.8 x 8.4 mm)
Uploaded:
February 26, 2014
Shared:
June 04, 2016
Total Price:
$0.50
Adapter to fix misrouted SOT223 1117 (Pin 2 and EPAD GND instead of VOUT)
Adapter to fix misrouted SOT223 1117 (Pin 2 and EPAD GND instead of VOUT)
WCB
author: ryanmohedano
2 layer board of 3.60 x 2.01 inches (91.3 x 51.0 mm)
Uploaded:
January 04, 2016
Shared:
June 03, 2016
Total Price:
$36.10
WCB
WCB
MECHADUINO
author: OpenSourceActivist
2 layer board of 1.65 x 1.65 inches (41.9 x 41.9 mm)
Uploaded:
June 03, 2016
Shared:
June 03, 2016
Total Price:
$13.60
CLOSED LOOP STEPPER SERVO CONTROLLER
CLOSED LOOP STEPPER SERVO CONTROLLER
ESP Switch01
author: justDIY
2 layer board of 1.31 x 2.36 inches (33.2 x 59.8 mm)
Uploaded:
May 14, 2016
Shared:
June 03, 2016
Total Price:
$15.40
ESP8266 dual DC switch. I'm using an ESP07 module for external antenna. support and the TC4427 gate drive IC to drive the mosfets hard using input voltage (up to 18v). Any D-PAK N-fet should work, just watch Vgs vs Ids.
Show full description
ESP8266 dual DC switch. I'm using an ESP07 module for external antenna. support and the TC4427 gate drive IC to drive the mosfets hard using input voltage (up to 18v). Any D-PAK N-fet should work, just watch Vgs vs Ids.
Headset Breakout
author: fossum
2 layer board of 0.59 x 0.63 inches (14.9 x 16.0 mm)
Uploaded:
May 23, 2016
Shared:
June 02, 2016
Total Price:
$1.85
Breakout board for a full featured 2.5mm TRRS headset. You don't need all the pins, but they are there just in case.
I made this with a SJ1-4253x from Digikey. You may need to clip the guide posts on the bottom of the part, but other than that it fits fine.
Breakout board for a full featured 2.5mm TRRS headset. You don't need all the pins, but they are there just in case.
I made this with a SJ1-4253x from Digikey. You may need to clip the guide posts on the bottom of the part, but other than that it fits fine.
BeagleLogic Cape v1.1 (kicad_pcb upload)
author: fustini
2 layer board of 2.15 x 2.80 inches (54.7 x 71.0 mm)
Uploaded:
June 02, 2016
Shared:
June 02, 2016
Total Price:
$30.10
Uploaded KiCad PCB file from GitHub repo: https://raw.githubusercontent.com/abhishek-kakkar/BeagleLogic/master/cape/BeagleLogic%20Cape.kicad_pcb
Most recent commit when uploaded: c140527 on Jan 7, 2015 @abhishek-kakkar abhishek-kakkar cape: Initial commit - v1.1
Uploaded KiCad PCB file from GitHub repo: https://raw.githubusercontent.com/abhishek-kakkar/BeagleLogic/master/cape/BeagleLogic%20Cape.kicad_pcb
Most recent commit when uploaded: c140527 on Jan 7, 2015 @abhishek-kakkar abhishek-kakkar cape: Initial commit - v1.1
ASM LogicFCS v0.1
author: CQB-PCB
2 layer board of 1.51 x 0.68 inches (38.2 x 17.3 mm)
Uploaded:
May 02, 2016
Shared:
June 02, 2016
Total Price:
$5.10
Second iteration of the airsoft fire control system using only discreet logic components. More information at Airsoft Mechanics forum.
Here is the schematic and [BOM]( https://drive.google…
Show full description
Second iteration of the airsoft fire control system using only discreet logic components. More information at Airsoft Mechanics forum.
Here is the schematic and [BOM]( https://drive.google…
Show full description
VL53L0X.v01
author: PeskyProducts
4 layer board of 0.71 x 0.31 inches (17.9 x 7.8 mm)
Uploaded:
June 02, 2016
Shared:
June 02, 2016
Total Price:
$2.10
Latest time-of-flight proximity sensor from ST Microelectronics using 940 nm laser and capable of 2 M ranging with 10 mm accuracy. Small breakout for testing on a breadboard or mounting on a Teensy or Dragonfly.
Latest time-of-flight proximity sensor from ST Microelectronics using 940 nm laser and capable of 2 M ranging with 10 mm accuracy. Small breakout for testing on a breadboard or mounting on a Teensy or Dragonfly.
