Shared Projects

Shared Projects

UU - MIND+ with STM32 F103CBU6

author: Firebirduino
Top
Bottom

2 layer board of 1.82 x 0.44 inches (46.1 x 11.2 mm)
Uploaded: May 01, 2016
Shared: May 01, 2016
Total Price: $3.95

DIY UNO Upgrade with the STM32F103CBU6, 72 MHz STM32, Cortex M3, fastest ARM controller in the UNO form factor.

ATMEGA328P DIP drop-in replacement.

Schematic and BOM available at www.firebirduino.com

DIY UNO Upgrade with the STM32F103CBU6, 72 MHz STM32, Cortex M3, fastest ARM controller in the UNO form factor.

ATMEGA328P DIP drop-in replacement.

Schematic and BOM available at www.firebirduino.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HQB15 v3

author: HQ
Top
Bottom

2 layer board of 0.62 x 0.62 inches (15.6 x 15.6 mm)
Uploaded: May 01, 2016
Shared: May 01, 2016
Total Price: $1.85

15.6mm boost driver board for ATtiny13A MCU

v3.15

this board is provided as is and without any warranty, even without the implied warranty of fitness for a particular purpose

15.6mm boost driver board for ATtiny13A MCU

v3.15

this board is provided as is and without any warranty, even without the implied warranty of fitness for a particular purpose

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Switchinator

author: ae7pb.net
Top
Bottom

2 layer board of 2.00 x 1.74 inches (50.9 x 44.2 mm)
Uploaded: April 29, 2016
Shared: May 01, 2016
Total Price: $17.40

Switchinator nrf24L01 avr328p remote switching

Switchinator nrf24L01 avr328p remote switching

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ds12887_subs_SOIC_V3

author: maeslin
Top
Bottom

2 layer board of 0.60 x 1.20 inches (15.3 x 30.5 mm)
Uploaded: October 12, 2014
Shared: May 01, 2016
Total Price: $3.60

DS12887 substitute with replaceable battery; Updated version.

Uses:

  • 1x DS12885/BQ3285 in SOIC package

  • 1x 32.768kHz crystal, SMD, 6pF

  • 1x CR1220 battery holder (Harwin S8411-45R or equivalent)

  • 1x adapter socket (CNC Tech 220-1-24-006) with some pins cut.

‘Flat’ pins on the…

Show full description

DS12887 substitute with replaceable battery; Updated version.

Uses:

  • 1x DS12885/BQ3285 in SOIC package

  • 1x 32.768kHz crystal, SMD, 6pF

  • 1x CR1220 battery holder (Harwin S8411-45R or equivalent)

  • 1x adapter socket (CNC Tech 220-1-24-006) with some pins cut.

‘Flat’ pins on the…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Micro ISP connector

author: BertHoogenboom
Top
Bottom

2 layer board of 0.51 x 0.31 inches (12.8 x 7.8 mm)
Uploaded: March 26, 2016
Shared: May 01, 2016
Total Price: $0.75

Micro ISP connector for Atmel Chips this is a adapter to program the servoCPU. Use 1mm thick pogo-pins to connect to the board

Micro ISP connector for Atmel Chips this is a adapter to program the servoCPU. Use 1mm thick pogo-pins to connect to the board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bus Pirate Breadboard Connector

author: hannes
Top
Bottom

2 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded: May 01, 2016
Shared: May 01, 2016
Total Price: $2.10

2x5 pin header breadboard connector

For more details see the github page of the project.

2x5 pin header breadboard connector

For more details see the github page of the project.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED Projection RB

author: cnlohr
Top
Bottom

2 layer board of 1.00 x 1.36 inches (25.5 x 34.6 mm)
Uploaded: April 01, 2015
Shared: May 01, 2016
Total Price: $6.80

LED Projection

LED Projection

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

The Wah Pedal

author: Camilo.Tejeiro
Top
Bottom

2 layer board of 0.91 x 1.37 inches (23.2 x 34.7 mm)
Uploaded: April 29, 2016
Shared: May 01, 2016
Total Price: $6.20

Made in KiCad.
V0.1-20160426
Prototype, not yet tested

Circuit implementing a simple active variable filter with a couple of transistors and no variable reactive components.

Made in KiCad.
V0.1-20160426
Prototype, not yet tested

Circuit implementing a simple active variable filter with a couple of transistors and no variable reactive components.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8285DevBoard.v01

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 1.01 inches (18.0 x 25.6 mm)
Uploaded: May 01, 2016
Shared: May 01, 2016
Total Price: $7.10

Development breakout for the ESP8285 (ESP8266 with embedded 1 Mbyte flash). All GPIOs broken out to 0.1 inch edge pins, FTDI230XQ so ESP8255 can be programmed and send serial out through Micro-B USB connector. MIC5528 3V3, 500 mA LDO regulator for plenty of power through LiPo battery or VUSB. MAX…

Show full description

Development breakout for the ESP8285 (ESP8266 with embedded 1 Mbyte flash). All GPIOs broken out to 0.1 inch edge pins, FTDI230XQ so ESP8255 can be programmed and send serial out through Micro-B USB connector. MIC5528 3V3, 500 mA LDO regulator for plenty of power through LiPo battery or VUSB. MAX…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FigTroniX TRS80 Model 100 - KD5VMF

author: KD5VMF
Top
Bottom

2 layer board of 0.74 x 1.43 inches (18.8 x 36.4 mm)
Uploaded: April 30, 2016
Shared: April 30, 2016
Total Price: $5.25

TRS80 Model 100 32-PIN PLCC SOCKET Rom Adapter. With this you can fix the Y2K issue with the TRS80 Model 100.

[email protected]

TRS80 Model 100 32-PIN PLCC SOCKET Rom Adapter. With this you can fix the Y2K issue with the TRS80 Model 100.

[email protected]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fireshow MCP23017 Breakout

author: AleksClark
Top
Bottom

2 layer board of 1.62 x 3.77 inches (41.2 x 95.8 mm)
Uploaded: April 30, 2016
Shared: April 30, 2016
Total Price: $30.50

breakout 2x MCP23017 to Raspberry Pi GPIO via i2c

breakout 2x MCP23017 to Raspberry Pi GPIO via i2c

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

toor camp buckets shield

author: hydronics
Top
Bottom

2 layer board of 1.02 x 1.91 inches (25.9 x 48.5 mm)
Uploaded: April 30, 2016
Shared: April 30, 2016
Total Price: $9.70

ESP shield

ESP shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

broversity

author: artemen
Top
Bottom

4 layer board of 1.36 x 1.13 inches (34.5 x 28.6 mm)
Uploaded: February 01, 2016
Shared: April 30, 2016
Total Price: $15.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Trinket Battery Charging Shield

author: bwshockley
Top
Bottom

2 layer board of 0.61 x 0.81 inches (15.4 x 20.4 mm)
Uploaded: April 29, 2016
Shared: April 29, 2016
Total Price: $2.40

Shield for Adafruit Trinket that includes a battery charger and WS2812 LED.

Link to Github with BOM and details.

Shield for Adafruit Trinket that includes a battery charger and WS2812 LED.

Link to Github with BOM and details.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MMVDM V3.0

author: goboxgizmos
Top
Bottom

2 layer board of 2.01 x 2.11 inches (51.0 x 53.5 mm)
Uploaded: April 29, 2016
Shared: April 29, 2016
Total Price: $21.15

https://groups.yahoo.com/neo/groups/mmdvm/files

https://groups.yahoo.com/neo/groups/mmdvm/files

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

atmega32u2

author: Khne
Top
Bottom

2 layer board of 1.01 x 1.16 inches (25.7 x 29.4 mm)
Uploaded: September 06, 2015
Shared: April 29, 2016
Total Price: $5.85

small atmega8u2 - atmega32u2 board

small atmega8u2 - atmega32u2 board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATmegaXX8 Breakout Board

author: Garph
Top
Bottom

2 layer board of 0.90 x 2.05 inches (22.8 x 52.1 mm)
Uploaded: April 22, 2016
Shared: April 29, 2016
Total Price: $9.20

A breadboard-friendly package to quickly program and prototype with my ATMega328P’s. Ties reset high and includes bypass capacitors on power supply. Tests and BOM are on the way!

A breadboard-friendly package to quickly program and prototype with my ATMega328P’s. Ties reset high and includes bypass capacitors on power supply. Tests and BOM are on the way!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Lightbug v1.1

author: ripper
Top
Bottom

2 layer board of 2.95 x 3.73 inches (75.0 x 94.7 mm)
Uploaded: April 29, 2016
Shared: April 29, 2016
Total Price: $55.00

A small, Arduino based robot, which follows light and can be upgraded.

Source files on Github

Related blog post

![picture of the robot](http://logbuch.lima-city.de/blo…

Show full description

A small, Arduino based robot, which follows light and can be upgraded.

Source files on Github

Related blog post

![picture of the robot](http://logbuch.lima-city.de/blo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lpc1102uk_revb

author: KerwoodDerby
Top
Bottom

2 layer board of 0.99 x 0.71 inches (25.0 x 18.0 mm)
Uploaded: April 16, 2016
Shared: April 29, 2016
Total Price: $3.45

Riff on richardeoin's board.

I wanted access to the interior pins, so I tweaked the WLCSP16 pattern to give me a little room for a 5 mil trace. This exceeds the design rules for 2-layer boards, but I can claim success, having just gotten my boards back and successfully programmed my diminutive…

Show full description

Riff on richardeoin's board.

I wanted access to the interior pins, so I tweaked the WLCSP16 pattern to give me a little room for a 5 mil trace. This exceeds the design rules for 2-layer boards, but I can claim success, having just gotten my boards back and successfully programmed my diminutive…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARMKit2

author: Mateusz
Top
Bottom

2 layer board of 2.21 x 2.31 inches (56.1 x 58.6 mm)
Uploaded: April 28, 2016
Shared: April 28, 2016
Total Price: $25.45

The STM32F405RG 64LQFP Breakout board

The STM32F405RG 64LQFP Breakout board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy