Shared Projects

Shared Projects

RS17 - Depth Sensor - RevB

author: Ryan-Summers
Top
Bottom

2 layer board of 2.63 x 1.76 inches (66.7 x 44.6 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $23.05

Revision B of the Palouse Robosub Depth Sensor Board. This board connects to 4 I2C depth sensors. It needs an interface converter mounted on top to be functional.

Revision B of the Palouse Robosub Depth Sensor Board. This board connects to 4 I2C depth sensors. It needs an interface converter mounted on top to be functional.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - Digital Isolator - RevC

author: Ryan-Summers
Top
Bottom

2 layer board of 1.71 x 1.41 inches (43.3 x 35.7 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $11.95

Revision C of Palouse Robosub USB interface board isolator. This board provides isolation for the interface converter when signals need to be sent through high-noise environments and are on separate power systems.

Revision C of Palouse Robosub USB interface board isolator. This board provides isolation for the interface converter when signals need to be sent through high-noise environments and are on separate power systems.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - Interface Converter - RevC

author: Ryan-Summers
Top
Bottom

2 layer board of 1.71 x 1.41 inches (43.3 x 35.7 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $11.95

Revision C of the Palouse Robosub interface converter board. This board converts USB to a generic serial interface utilizing the FT232H chip. This board is designed to sit on top of other boards.

Revision C of the Palouse Robosub interface converter board. This board converts USB to a generic serial interface utilizing the FT232H chip. This board is designed to sit on top of other boards.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - LED Controller - RevB

author: Ryan-Summers
Top
Bottom

2 layer board of 2.31 x 1.81 inches (58.6 x 45.9 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $20.80

Revision B of the Palouse Robosub LED Controller board. This board is designed to control up to four NeoPixel LED strips.

Revision B of the Palouse Robosub LED Controller board. This board is designed to control up to four NeoPixel LED strips.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - Maestro Adapter - RevB

author: Ryan-Summers
Top
Bottom

2 layer board of 1.41 x 2.91 inches (35.7 x 73.8 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $20.40

Revision B of the Palouse Robosub Maestro Adapter board. This board is a converter board for isolating the outputs of the Pololu Maestro controller.

Revision B of the Palouse Robosub Maestro Adapter board. This board is a converter board for isolating the outputs of the Pololu Maestro controller.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - Pneumatics Controller - RevA

author: Ryan-Summers
Top
Bottom

2 layer board of 4.18 x 1.89 inches (106.1 x 47.9 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $39.35

Revision A of the Palouse Robosub pneumatics controller. This controller is used for amplifying power signals from the microcontroller to trigger pneumatic signals.

Revision A of the Palouse Robosub pneumatics controller. This controller is used for amplifying power signals from the microcontroller to trigger pneumatic signals.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB_coil.brd

author: Renniks
Top
Bottom

2 layer board of 0.68 x 1.00 inches (17.2 x 25.4 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $3.35

PCB coil

PCB coil

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

controlboard.kicad_pcb

author: luz
Top
Bottom

2 layer board of 2.43 x 1.84 inches (61.6 x 46.6 mm)
Uploaded: January 28, 2017
Shared: March 09, 2017
Total Price: $22.25

Pixelboard/SBB Fallblatt controller v2. See my p44sbbd and pixelboardd github repos for software and context (work in progress)

Pixelboard/SBB Fallblatt controller v2. See my p44sbbd and pixelboardd github repos for software and context (work in progress)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB_Annoy.kicad_pcb

author: AndrewK
Top
Bottom

2 layer board of 1.51 x 0.57 inches (38.2 x 14.4 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $4.25

USB powered "Annoyatron" device for April Fools

USB powered "Annoyatron" device for April Fools

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

fg_DSub26 Breakout 01

author: flyguy
Top
Bottom

2 layer board of 1.62 x 2.82 inches (41.2 x 71.6 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $22.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLED12.zip

author: kmlee
Top
Bottom

2 layer board of 0.36 x 0.52 inches (9.1 x 13.2 mm)
Uploaded: November 07, 2016
Shared: March 09, 2017
Total Price: $0.90

Auxiliary LED board

Auxiliary LED board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ButtonBoard-RevA.brd

author: kevinfodor
Top
Bottom

2 layer board of 2.30 x 1.30 inches (58.4 x 33.0 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $14.95

Hex Switch RC-Debouncer Module

Hex Switch RC-Debouncer Module

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wemos D1 Mini Shield to Whizoo MSGEQ7 Breakout Adapter

author: jasoncoon
Top
Bottom

2 layer board of 1.05 x 0.85 inches (26.7 x 21.6 mm)
Uploaded: February 24, 2017
Shared: March 08, 2017
Total Price: $4.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wemos D1 Mini Shield to Macetech Shades Audio Sensor v2 Adapter

author: jasoncoon
Top
Bottom

2 layer board of 1.05 x 0.85 inches (26.7 x 21.6 mm)
Uploaded: February 24, 2017
Shared: March 08, 2017
Total Price: $4.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

chip_holder_v5.brd

author: jisland
Top
Bottom

2 layer board of 1.58 x 0.63 inches (40.0 x 15.9 mm)
Uploaded: March 08, 2017
Shared: March 08, 2017
Total Price: $4.90

Auston chip holder

Auston chip holder

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rf_bridge.kicad_pcb

author: buserror
Top
Bottom

2 layer board of 1.00 x 1.80 inches (25.4 x 45.8 mm)
Uploaded: March 08, 2017
Shared: March 08, 2017
Total Price: $9.00

Board for my Serial bridge to RF 433Mhz transceiver. Uses an arduino nano, a cheap 433 RX + Tx module, and a NXP switch for the antenna. All the software bits are on my github. See https://github.com/buserror/rf_bridge

Board for my Serial bridge to RF 433Mhz transceiver. Uses an arduino nano, a cheap 433 RX + Tx module, and a NXP switch for the antenna. All the software bits are on my github. See https://github.com/buserror/rf_bridge

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LTC2309 8 channel 12bit ADC to I2C TSSOP-20

author: donatas
Top
Bottom

2 layer board of 1.64 x 0.88 inches (41.8 x 22.4 mm)
Uploaded: March 08, 2017
Shared: March 08, 2017
Total Price: $7.25

LTC2309 PCB from datasheet. Use values referenced in datasheet. Uses 0603 parts.

LTC2309 PCB from datasheet. Use values referenced in datasheet. Uses 0603 parts.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USBCharger.v02

author: PeskyProducts
Top
Bottom

2 layer board of 0.43 x 0.43 inches (10.9 x 10.8 mm)
Uploaded: March 08, 2017
Shared: March 08, 2017
Total Price: $0.90

Off-main-board USB connector and battery charger.

Off-main-board USB connector and battery charger.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Adns3050 Breakout Board V9

author: bgitego
Top
Bottom

2 layer board of 0.87 x 0.87 inches (22.0 x 22.1 mm)
Uploaded: May 22, 2015
Shared: March 08, 2017
Total Price: $3.75

Breakout Board for optical mouse encoder.

Breakout Board for optical mouse encoder.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ikea PS Lamp Hack Board

author: echox
Top
Bottom

2 layer board of 2.96 x 2.01 inches (75.2 x 51.0 mm)
Uploaded: February 05, 2015
Shared: March 08, 2017
Total Price: $29.70

Just a simple shield for a sparkcore, stepper easydriver and a neopixel connector.

See https://github.com/echox/ikea-lamp-hack for details.

Just a simple shield for a sparkcore, stepper easydriver and a neopixel connector.

See https://github.com/echox/ikea-lamp-hack for details.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy