Shared Projects

Shared Projects

DS12887A replacement

author: Switching-Power
Top
Bottom

2 layer board of 1.20 x 0.64 inches (30.5 x 16.4 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $3.85

Discreet DS12887A RTC replacement

  • BT1 - S8411-45R CR1220 Holder
  • IC1 - BQ3285ESS
  • X1 - CM7V-T1A 32.768kHz 7pF
  • PCB - 0.8mm thickness

Discreet DS12887A RTC replacement

  • BT1 - S8411-45R CR1220 Holder
  • IC1 - BQ3285ESS
  • X1 - CM7V-T1A 32.768kHz 7pF
  • PCB - 0.8mm thickness
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ble_rev_d3.brd

author: shlomozippel
Top
Bottom

2 layer board of 1.54 x 0.71 inches (39.0 x 18.0 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $5.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ble_rev_d2.brd

author: shlomozippel
Top
Bottom

2 layer board of 1.46 x 0.71 inches (37.0 x 18.0 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $5.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ble_rev_d1.brd

author: shlomozippel
Top
Bottom

2 layer board of 1.36 x 0.71 inches (34.6 x 18.1 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $4.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flatpack_connector.zip

author: tuan3192
Top
Bottom

2 layer board of 2.73 x 1.41 inches (69.3 x 35.8 mm)
Uploaded: November 29, 2016
Shared: March 10, 2017
Total Price: $19.25

connector board

connector board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ionfltr.zip

author: WIZM
Top
Bottom

2 layer board of 1.99 x 0.95 inches (50.4 x 24.0 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $9.35

5v ref with lpf

5v ref with lpf

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy 3.6 DIY Reference Board

author: PaulStoffregen
Top
Bottom

2 layer board of 3.00 x 2.50 inches (76.3 x 63.6 mm)
Uploaded: February 24, 2017
Shared: March 10, 2017
Total Price: $37.55

A known good reference board for testing the MKL04 chip when building a DIY Teensy 3.6. Refer to this [table for the differences between Teensy 3.6 and …

Show full description

A known good reference board for testing the MKL04 chip when building a DIY Teensy 3.6. Refer to this [table for the differences between Teensy 3.6 and …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - Interface Converter Adapter - RevA

author: Ryan-Summers
Top
Bottom

2 layer board of 2.41 x 1.51 inches (61.1 x 38.2 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $18.10

Revision A

Revision A

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rev.4

author: Mainstream818
Top
Bottom

2 layer board of 0.76 x 0.73 inches (19.2 x 18.6 mm)
Uploaded: January 23, 2017
Shared: March 10, 2017
Total Price: $2.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PotBelly v1 - v4 test rig

author: SwedishVaper
Top
Bottom

2 layer board of 2.36 x 1.31 inches (59.8 x 33.2 mm)
Uploaded: February 14, 2017
Shared: March 10, 2017
Total Price: $15.35

TESTED AND WORKING

parts required:

pogopins 1.6mm dia max (holes may have to be enlarged slightly) 2 voltmeters (blue) pcb header pins. spdt tact switch

Supply power from a dc-dc boost converter.

Breadboard friendly pin pitch.

TESTED AND WORKING

parts required:

pogopins 1.6mm dia max (holes may have to be enlarged slightly) 2 voltmeters (blue) pcb header pins. spdt tact switch

Supply power from a dc-dc boost converter.

Breadboard friendly pin pitch.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IN-14 NIXIE SOCKET

author: marc2912
Top
Bottom

2 layer board of 0.90 x 1.26 inches (22.9 x 32.1 mm)
Uploaded: September 15, 2014
Shared: March 10, 2017
Total Price: $5.65

IN-14 Nixie Tube Socket W/ LED Drill Hole

IN-14 Nixie Tube Socket W/ LED Drill Hole

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IN-19 NIXIE SOCKET

author: marc2912
Top
Bottom

2 layer board of 0.90 x 1.26 inches (22.9 x 32.1 mm)
Uploaded: September 15, 2014
Shared: March 10, 2017
Total Price: $5.65

IN-19 Nixie Tube Socket W/ LED Drill Hole

IN-19 Nixie Tube Socket W/ LED Drill Hole

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IN-12 NIXIE SOCKET

author: marc2912
Top
Bottom

2 layer board of 0.90 x 1.24 inches (22.9 x 31.4 mm)
Uploaded: September 18, 2014
Shared: March 10, 2017
Total Price: $5.55

IN-12 Nixie Tube Socket W/ LED Drill Hole

IN-12 Nixie Tube Socket W/ LED Drill Hole

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Generic Nixie Controller

author: marc2912
Top
Bottom

2 layer board of 4.04 x 2.06 inches (102.7 x 52.2 mm)
Uploaded: February 04, 2015
Shared: March 10, 2017
Total Price: $41.50

This is a generic Nixie controller V1

This is a generic Nixie controller V1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AllPixel PowerTap

author: ManiacalLabs
Top
Bottom

2 layer board of 0.91 x 0.91 inches (23.2 x 23.2 mm)
Uploaded: January 02, 2015
Shared: March 10, 2017
Total Price: $4.15

PowerTap power injector for use with Maniacal Labs AllPixel

PowerTap power injector for use with Maniacal Labs AllPixel

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rotary Encoder Breakout with Pull-ups

author: fustini
Top
Bottom

2 layer board of 0.68 x 0.82 inches (17.3 x 20.7 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $2.75

Breakout board designed in KiCad makes it easy to put a rotary encoder on a breadboard. Footprints on the back are meant for 1206 SMD resistors. I choose 1K resistors (marked 102) when I a…

Show full description

Breakout board designed in KiCad makes it easy to put a rotary encoder on a breadboard. Footprints on the back are meant for 1206 SMD resistors. I choose 1K resistors (marked 102) when I a…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UNTESTED kicad-teensy-epaper.kicad_pcb [921115b]

author: fustini
Top
Bottom

2 layer board of 2.72 x 1.68 inches (69.2 x 42.6 mm)
Uploaded: February 04, 2017
Shared: March 10, 2017
Total Price: $22.85

WARNING: THIS PROJECT IS OLD

NEW VERSION: https://oshpark.com/shared_projects/1CiimZcf

UNTESTED

WARNING: THIS PROJECT IS OLD

NEW VERSION: https://oshpark.com/shared_projects/1CiimZcf

UNTESTED

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ax350-driver v2

author: davidsenk
Top
Bottom

2 layer board of 2.64 x 2.01 inches (67.0 x 51.0 mm)
Uploaded: March 10, 2017
Shared: March 10, 2017
Total Price: $26.45

PCB for Brother AX350 Arduino Driver

PCB for Brother AX350 Arduino Driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

cristina_v11.brd

author: knaus01
Top
Bottom

2 layer board of 3.08 x 2.50 inches (78.1 x 63.5 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $38.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS17 - BNO Adapter - Rev C

author: Ryan-Summers
Top
Bottom

2 layer board of 2.41 x 1.51 inches (61.1 x 38.2 mm)
Uploaded: March 09, 2017
Shared: March 09, 2017
Total Price: $18.10

Revision C of the Palouse Robosub Bno055 Adapter board. This board is used for adapting an interface converter to the Adafruit BNO055 sensor board.

Revision C of the Palouse Robosub Bno055 Adapter board. This board is used for adapting an interface converter to the Adafruit BNO055 sensor board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy