Shared Projects

Shared Projects

BLF driver 5.6m-SRK [rev02][untested]

author: DEL
Top
Bottom

2 layer board of 1.82 x 1.81 inches (46.2 x 46.0 mm)
Uploaded: May 15, 2017
Shared: June 07, 2017
Total Price: $16.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EscornaBot CPU 2.12

author: xdesig
Top
Bottom

2 layer board of 1.97 x 3.53 inches (49.9 x 89.6 mm)
Uploaded: May 06, 2017
Shared: June 07, 2017
Total Price: $34.65

Escornabot is an open source/hardware project that aims to bring robotics and programming to children. <http://escornabot.com/web/> imax

Escornabot is an open source/hardware project that aims to bring robotics and programming to children. <http://escornabot.com/web/> imax

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tiny Face Watch

author: johnsondavies
Top
Bottom

2 layer board of 1.25 x 1.42 inches (31.8 x 36.0 mm)
Uploaded: June 07, 2017
Shared: June 07, 2017
Total Price: $8.85

Displays the time by drawing an analogue watch face on a miniature 64x48 OLED display. It uses a separate crystal-controlled low-power RTC chip to keep time to within a few seconds a month, and puts the processor and display to sleep when not showing the time to give a battery life of over a year…

Show full description

Displays the time by drawing an analogue watch face on a miniature 64x48 OLED display. It uses a separate crystal-controlled low-power RTC chip to keep time to within a few seconds a month, and puts the processor and display to sleep when not showing the time to give a battery life of over a year…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

reference_voltage_debugger.brd

author: ckometter
Top
Bottom

2 layer board of 2.00 x 1.59 inches (50.8 x 40.3 mm)
Uploaded: June 07, 2017
Shared: June 07, 2017
Total Price: $15.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber.zip

author: Tankor
Top
Bottom

2 layer board of 1.78 x 0.91 inches (45.3 x 23.1 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $8.05

Meteo v3.0

Meteo v3.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jenThermoAmp2mega_083116e_OSH_1.zip

author: openmaze
Top
Bottom

2 layer board of 5.29 x 2.47 inches (134.2 x 62.7 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $65.25

combined thermo amp with 2x solenoid control

combined thermo amp with 2x solenoid control

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS422 am26LV31 / am26LV32 breakout board

author: slipstream
Top
Bottom

2 layer board of 1.01 x 1.11 inches (25.6 x 28.1 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $5.55

Breakout board for am26lv31 or am26lv32 RS422 differential line driver and receiver. Pads for bypass caps included if needed. Fits standard 0.1" headers for use in breadboards.

Breakout board for am26lv31 or am26lv32 RS422 differential line driver and receiver. Pads for bypass caps included if needed. Fits standard 0.1" headers for use in breadboards.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rotary Encoder Breakout (with optional pullups)

author: jazzychad
Top
Bottom

2 layer board of 0.70 x 0.85 inches (17.8 x 21.6 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $2.95

Rotary Encoder Breakout board with optional pullup resistors.

This breakout board makes it easy to add a rotary encoder to a breadboard or panel-mounted project. If you are using something like an arduino or other mcu with internal pullup resistors to connect the A and B pins, then you don't n…

Show full description

Rotary Encoder Breakout board with optional pullup resistors.

This breakout board makes it easy to add a rotary encoder to a breadboard or panel-mounted project. If you are using something like an arduino or other mcu with internal pullup resistors to connect the A and B pins, then you don't n…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

breakout_eagle81.brd

author: bryce.himebaugh
Top
Bottom

4 layer board of 3.00 x 1.95 inches (76.2 x 49.5 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $58.50

Avian Monitor beta_r001_hw Breakout Board

Avian Monitor beta_r001_hw Breakout Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mecha adapter.brd

author: IdaKnow
Top
Bottom

2 layer board of 0.60 x 0.80 inches (15.3 x 20.3 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $2.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2X8 HUB

author: trevortjes
Top
Bottom

2 layer board of 0.91 x 0.31 inches (23.0 x 7.9 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $1.40

General purpose 2x8 HUB.

General purpose 2x8 HUB.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LM78XX Adapter Board

author: trevortjes
Top
Bottom

2 layer board of 1.01 x 0.60 inches (25.6 x 15.2 mm)
Uploaded: May 13, 2017
Shared: June 06, 2017
Total Price: $3.00

This PCB is compatible with all LM78XX voltage regulators. Includes status LED (on or off), decoupling and a switch.

This PCB is compatible with all LM78XX voltage regulators. Includes status LED (on or off), decoupling and a switch.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CarWars PCB

author: mbarulic
Top
Bottom

2 layer board of 2.60 x 2.24 inches (66.0 x 56.8 mm)
Uploaded: June 06, 2017
Shared: June 06, 2017
Total Price: $29.05

Prototype interface board for SparkFun AVC CarWars

Prototype interface board for SparkFun AVC CarWars

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Single Cell Flashlight V1.0

author: Serge
Top
Bottom

2 layer board of 0.42 x 0.50 inches (10.7 x 12.7 mm)
Uploaded: May 23, 2017
Shared: June 05, 2017
Total Price: $1.00

Single Cell Flashlight based on Diodes ZXLD383 LED Driver - Version 1.0

Single Cell Flashlight based on Diodes ZXLD383 LED Driver - Version 1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STLINK 20 pin to 10 pin and serial header

author: parasram
Top
Bottom

2 layer board of 1.81 x 1.61 inches (45.9 x 40.8 mm)
Uploaded: March 08, 2017
Shared: June 05, 2017
Total Price: $14.50

STlink connects to 20 pin and 10 pin to TagConnect and FTDI Serial

STlink connects to 20 pin and 10 pin to TagConnect and FTDI Serial

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HF differential probe - v3

author: sjm
Top
Bottom

2 layer board of 1.58 x 1.74 inches (40.2 x 44.2 mm)
Uploaded: June 04, 2017
Shared: June 04, 2017
Total Price: $13.75

Differential probe, DC-100MHz, +/-15V input, powered from a single LiPo cell with USB charging.

More details here: http://stevenmerrifield.com/diff-probe/index.html

Differential probe, DC-100MHz, +/-15V input, powered from a single LiPo cell with USB charging.

More details here: http://stevenmerrifield.com/diff-probe/index.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shine On You Crazy KiCad

author: ChrisGammell
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.6 x 25.6 mm)
Uploaded: May 13, 2017
Shared: June 04, 2017
Total Price: $5.05

This is a board created for a small series teaching how to use KiCad. It's called Shine On You Crazy KiCad. You can view the entire course for free on Contextual Electronics

This is a board created for a small series teaching how to use KiCad. It's called Shine On You Crazy KiCad. You can view the entire course for free on Contextual Electronics

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny85 LED Strip Dimmer

author: RoboUlbricht
Top
Bottom

2 layer board of 1.85 x 1.95 inches (47.1 x 49.6 mm)
Uploaded: June 04, 2017
Shared: June 04, 2017
Total Price: $18.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BeagleWire FPGA cape

author: fustini
Top
Bottom

4 layer board of 2.66 x 3.54 inches (67.6 x 89.9 mm)
Uploaded: June 04, 2017
Shared: June 04, 2017
Total Price: $94.10

NOTE: I created this shared project as an example of how to link to project resources.

This is content is formatted by Markdown syntax. Here is a good guide: Markdown Cheatsheet

Please read this blog post for more info…

Show full description

NOTE: I created this shared project as an example of how to link to project resources.

This is content is formatted by Markdown syntax. Here is a good guide: Markdown Cheatsheet

Please read this blog post for more info…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

aquabus_adapter_0.1.zip

author: theatrus
Top
Bottom

2 layer board of 1.61 x 2.11 inches (40.9 x 53.6 mm)
Uploaded: June 04, 2017
Shared: June 04, 2017
Total Price: $16.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy