Shared projects

zxfixer-GERBERS.zip

2 layer board of 2.81 x 1.11 inches (71.4 x 28.2 mm).
Shared on September 7th, 2017 04:20

Latest version of ZX-Spectrum+2A/+3 fixer


zxfixer-GERBERS.zip

2 layer board of 2.81 x 1.11 inches (71.4 x 28.2 mm).
Shared on September 7th, 2017 04:20

Latest version of ZX-Spectrum+2A/+3 fixer



pcjrcart1.zip

2 layer board of 1.86 x 2.51 inches (47.3 x 63.8 mm).
Shared on January 11th, 2017 02:31

PCjrCart v1 (2016)


pcjrcart1.zip

2 layer board of 1.86 x 2.51 inches (47.3 x 63.8 mm).
Shared on January 11th, 2017 02:31

PCjrCart v1 (2016)



BBlock4/NAND

2 layer board of 0.61 x 0.91 inches (15.5 x 23.1 mm).
Shared on June 1st, 2016 06:11

Breadboard ready four NAND gates


BBlock4/NAND

2 layer board of 0.61 x 0.91 inches (15.5 x 23.1 mm).
Shared on June 1st, 2016 06:11

Breadboard ready four NAND gates



NEDONAND-9

2 layer board of 2.54 x 1.40 inches (64.5 x 35.6 mm).
Shared on March 28th, 2016 10:54

9th board for NEDONAND project

Pins: GND,A,B,C,D,E,F,G,H,I,AND,VCC (from right to left, AND is output of 9-input AND gate)


NEDONAND-9

2 layer board of 2.54 x 1.40 inches (64.5 x 35.6 mm).
Shared on March 28th, 2016 10:54

9th board for NEDONAND project

Pins: GND,A,B,C,D,E,F,G,H,I,AND,VCC (from right to left, AND is output of 9-input AND gate)



NEDONAND-3

2 layer board of 3.29 x 3.15 inches (83.5 x 80.0 mm).
Shared on March 7th, 2016 14:29

3rd board for NEDONAND project

It’s stackable 4-bit part of NEDONAND program counter with parallel load that uses 2 board NEDONAND-2 to count from 0000 to 1111 binary. Pins description (2 rows - male for inputs and female for outputs):

1.1) IN (OUT) - count enable
1.2) ACT0 - external writing signal "0"
1.3) ACT1 - external writing signal "1"
1.4) /RESET - master reset
1.5) CLK - clock signal
1.6) NC - not connected
1.7) VCC - power +5V
1.8) GND - ground

2.1) D0 - bit 0 for writing
2.2) D1 - bit 1 for writing
2.3) D2 - bit 2 for writing
2.4) D3 - bit 3 for writing
2.5) D4 - used in next stacked boards
2.6) D5 - used in next stacked boards
2.7) D6 - used in next stacked boards
2.8) D7 - used in next stacked boards
2.9) D8 - used in next stacked boards
2.10) D9 - used in next stacked boards
2.11) D10 - used in next stacked boards
2.12) D11 - used in next stacked boards (in case of 2K memory it's "0")

4-bit address output header on the right:

3.1) A0
3.2) A1
3.3) A2
3.4) A3


NEDONAND-3

2 layer board of 3.29 x 3.15 inches (83.5 x 80.0 mm).
Shared on March 7th, 2016 14:29

3rd board for NEDONAND project

It’s stackable 4-bit part of NEDONAND program counter with parallel load that uses 2 board NEDONAND-2 to count from 0000 to 1111 binary. Pins description (2 rows - male for inputs and female for outputs):

1.1) IN (OUT) - count enable
1.2) ACT0 - external writing signal "0"
1.3) ACT1 - external writing signal "1"
1.4) /RESET - master reset
1.5) CLK - clock signal
1.6) NC - not connected
1.7) VCC - power +5V
1.8) GND - ground

2.1) D0 - bit 0 for writing
2.2) D1 - bit 1 for writing
2.3) D2 - bit 2 for writing
2.4) D3 - bit 3 for writing
2.5) D4 - used in next stacked boards
2.6) D5 - used in next stacked boards
2.7) D6 - used in next stacked boards
2.8) D7 - used in next stacked boards
2.9) D8 - used in next stacked boards
2.10) D9 - used in next stacked boards
2.11) D10 - used in next stacked boards
2.12) D11 - used in next stacked boards (in case of 2K memory it's "0")

4-bit address output header on the right:

3.1) A0
3.2) A1
3.3) A2
3.4) A3