1Bitsy 1UP V0.1a
author: esden
4 layer board of 3.20 x 5.28 inches (81.2 x 134.2 mm)
Uploaded:
June 30, 2017
Shared:
July 18, 2017
Total Price:
$168.70
Retro inspired handheld game console. Based on the 1Bitsy STM32F4 168MHz, 192kB RAM, 1MB Flash microcontroller and Black Magic Probe JTAG/SWD debugger and programmer based software environment.
- 1Bitsy: https://1bitsquared.com/products/1bitsy
- Blac…
Show full description
Retro inspired handheld game console. Based on the 1Bitsy STM32F4 168MHz, 192kB RAM, 1MB Flash microcontroller and Black Magic Probe JTAG/SWD debugger and programmer based software environment.
- 1Bitsy: https://1bitsquared.com/products/1bitsy
- Blac…
Show full description
front_trendsonic.brd
author: TimeWalker75a
2 layer board of 3.74 x 0.81 inches (95.1 x 20.6 mm)
Uploaded:
July 17, 2017
Shared:
July 18, 2017
Total Price:
$15.20
Trendsonic Front Panel Replica
Trendsonic Front Panel Replica
6DOF Servo v0.2
author: steverich
2 layer board of 1.70 x 1.14 inches (43.2 x 28.9 mm)
Uploaded:
May 28, 2014
Shared:
July 17, 2017
Total Price:
$9.65
Now with working voltage regulator and correctly wired ISP header!
Now with working voltage regulator and correctly wired ISP header!
Stir plate bus
author: steverich
2 layer board of 1.15 x 0.99 inches (29.2 x 25.1 mm)
Uploaded:
May 30, 2014
Shared:
July 17, 2017
Total Price:
$5.65
Basic breakout for 3 switches and a barrel jack, with big thick traces and ground planes. No potentiometers.
Basic breakout for 3 switches and a barrel jack, with big thick traces and ground planes. No potentiometers.
Bubble dispay with i2c
author: steverich
2 layer board of 0.76 x 0.90 inches (19.2 x 22.9 mm)
Uploaded:
June 03, 2014
Shared:
July 17, 2017
Total Price:
$3.40
Revised bubble display/atmega328p-au board with serial/power pins removed, i2c added, hand traces and ground plane.
Revised bubble display/atmega328p-au board with serial/power pins removed, i2c added, hand traces and ground plane.
Revised single servo board, ATtiny85, XC, I2C
author: steverich
2 layer board of 0.58 x 0.66 inches (14.6 x 16.8 mm)
Uploaded:
June 04, 2014
Shared:
July 17, 2017
Total Price:
$1.90
Revision to single servo board. Fixed voltage regulator enable, added SMD crystal and caps, rewired breakouts from serial to I2C pins, changed from SOIC8-150 to SOIC8-200 for chip.
Revision to single servo board. Fixed voltage regulator enable, added SMD crystal and caps, rewired breakouts from serial to I2C pins, changed from SOIC8-150 to SOIC8-200 for chip.
Edge ISP programmer
author: steverich
2 layer board of 0.78 x 0.41 inches (19.8 x 10.4 mm)
Uploaded:
June 08, 2014
Shared:
July 17, 2017
Total Price:
$1.55
Breakout for edge ISP to standard ISP, requires 2 for clamp setup.
Breakout for edge ISP to standard ISP, requires 2 for clamp setup.
Mini Altimeter v2
author: steverich
2 layer board of 1.00 x 1.04 inches (25.4 x 26.3 mm)
Uploaded:
June 25, 2014
Shared:
July 17, 2017
Total Price:
$5.15
Tweaked layout, added solder jumper to toggle max or current altitude.
Tweaked layout, added solder jumper to toggle max or current altitude.
TQFP32 Breakout breakout
author: steverich
2 layer board of 2.08 x 0.80 inches (52.8 x 20.3 mm)
Uploaded:
July 13, 2014
Shared:
July 17, 2017
Total Price:
$8.30
Breakout board for TQFP32 breakout, with ISP header, status led on 13/SCK and 16mhz crystal
Breakout board for TQFP32 breakout, with ISP header, status led on 13/SCK and 16mhz crystal
LED Clock v0.3
author: steverich
2 layer board of 1.45 x 1.50 inches (36.9 x 38.1 mm)
Uploaded:
July 30, 2014
Shared:
July 17, 2017
Total Price:
$10.85
v0.2 worked but required caps to buffer when phone is plugged/unplugged. Added 2 10uF 16V caps, also rerouted using all 14 mil vias instead of the standard 20 I had previously used.
v0.2 worked but required caps to buffer when phone is plugged/unplugged. Added 2 10uF 16V caps, also rerouted using all 14 mil vias instead of the standard 20 I had previously used.
