DataL_T3
author: JoaquinCastellanos
2 layer board of 3.41 x 2.01 inches (86.6 x 51.0 mm)
Uploaded:
March 12, 2013
Shared:
June 20, 2017
Total Price:
$34.25
Data Logger
Data Logger
PiezoConditioner-v0p1
author: stephen_carlson
2 layer board of 1.00 x 0.50 inches (25.4 x 12.7 mm)
Uploaded:
April 12, 2017
Shared:
June 19, 2017
Total Price:
$2.50
Piezo Charge Amp and Schmitt Trigger
Piezo Charge Amp and Schmitt Trigger
KatanaLRS-Rev2c
author: stephen_carlson
2 layer board of 2.10 x 1.10 inches (53.4 x 27.9 mm)
Uploaded:
August 08, 2015
Shared:
June 19, 2017
Total Price:
$11.55
LRS w/ ELT and Lipoly
LRS w/ ELT and Lipoly
LOSA_IMU.brd
author: anilinfotek
2 layer board of 0.31 x 0.49 inches (7.9 x 12.4 mm)
Uploaded:
June 19, 2017
Shared:
June 19, 2017
Total Price:
$0.75
USB Breakout with current monitor.
author: judge2005
2 layer board of 1.76 x 0.86 inches (44.6 x 21.7 mm)
Uploaded:
May 30, 2017
Shared:
June 19, 2017
Total Price:
$7.50
This is a very simple board that allows you to tap the 5V rail of a USB connection while passing the data signals through. It also uses an INA250 to provide a current monitor so you can figure the total current draw of your projects. It sets the Is pin to 2V per amp. You can put a scope on that t…
Show full description
This is a very simple board that allows you to tap the 5V rail of a USB connection while passing the data signals through. It also uses an INA250 to provide a current monitor so you can figure the total current draw of your projects. It sets the Is pin to 2V per amp. You can put a scope on that t…
Show full description
WEMOS D1 Mini LED Shield
author: MFornander
2 layer board of 1.01 x 0.81 inches (25.6 x 20.5 mm)
Uploaded:
June 19, 2017
Shared:
June 19, 2017
Total Price:
$4.05
GPIO to LED test board
GPIO to LED test board
Raspberry Pi Power Feed HAT
author: dewhisna
2 layer board of 2.56 x 2.23 inches (64.9 x 56.7 mm)
Uploaded:
June 18, 2017
Shared:
June 18, 2017
Total Price:
$28.50
Simple Raspberry Pi HAT Board that provides the backfeed protection logic to power a Raspberry Pi board from an external +5V lab-grade power supply, as per the Raspberry Pi HAT Specs and the [ZVD Circuit](https://github.com/raspberrypi/hats/blob/master/zvd-c…
Show full description
Simple Raspberry Pi HAT Board that provides the backfeed protection logic to power a Raspberry Pi board from an external +5V lab-grade power supply, as per the Raspberry Pi HAT Specs and the [ZVD Circuit](https://github.com/raspberrypi/hats/blob/master/zvd-c…
Show full description
Analog Discovery 2 — Header adapter
author: jamescarruthers
2 layer board of 2.05 x 0.63 inches (52.1 x 15.9 mm)
Uploaded:
June 18, 2017
Shared:
June 18, 2017
Total Price:
$6.40
rc2014_6502B
author: ancientcomputing
2 layer board of 3.99 x 2.00 inches (101.3 x 50.8 mm)
Uploaded:
June 04, 2017
Shared:
June 18, 2017
Total Price:
$39.85
6502 CPU Board Rev B. Designed for the RC2014. Board design files are at <https://github.com/ancientcomputing/rc2014/tree/master/eagle/6502_board_revb>
6502 CPU Board Rev B. Designed for the RC2014. Board design files are at <https://github.com/ancientcomputing/rc2014/tree/master/eagle/6502_board_revb>
MCRobbie Breakout v. 1.0.1
author: inmysocks
2 layer board of 1.01 x 1.41 inches (25.6 x 35.7 mm)
Uploaded:
June 18, 2017
Shared:
June 18, 2017
Total Price:
$7.05
VasttraPi Power Control board, rev.2
author: platisd
2 layer board of 2.06 x 1.15 inches (52.4 x 29.2 mm)
Uploaded:
May 18, 2017
Shared:
June 17, 2017
Total Price:
$11.85
A power control board for a Raspberry Pi used in the VasttraPi project. The board has four USB ports. The first one is used to receive power and power up an ATtiny85 microcontroller. The MCU drives a relay to turn on and off the power to two USB ports and t…
Show full description
A power control board for a Raspberry Pi used in the VasttraPi project. The board has four USB ports. The first one is used to receive power and power up an ATtiny85 microcontroller. The MCU drives a relay to turn on and off the power to two USB ports and t…
Show full description
