Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Two Filters ~ panel

author: Aemit
Top
Bottom

2 layer board of 6.64 x 4.21 inches (168.8 x 107.0 mm)
Uploaded: February 08, 2018
Shared: February 08, 2018
Total Price: $139.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS-422 Transmitter

author: sjm
Top
Bottom

2 layer board of 1.98 x 1.19 inches (50.2 x 30.2 mm)
Uploaded: February 08, 2018
Shared: February 08, 2018
Total Price: $11.75

A simple PIC generating RS-422 to simulate an avionics control unit. Data bits are selected using DIP switches.

A simple PIC generating RS-422 to simulate an avionics control unit. Data bits are selected using DIP switches.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FCIII e5frog134_double_holes_HCT04

author: Mulvak
Top
Bottom

2 layer board of 2.28 x 3.31 inches (58.0 x 84.0 mm)
Uploaded: February 07, 2018
Shared: February 07, 2018
Total Price: $37.75

Thanks to e5frog @ Lemon64

Thanks to e5frog @ Lemon64

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4 Layer Microstrip test

author: db4um
Top
Bottom

4 layer board of 0.87 x 1.34 inches (22.2 x 33.9 mm)
Uploaded: February 06, 2018
Shared: February 07, 2018
Total Price: $11.60

Evaluation Board for the different Stackup variations of the 0SH Park 4 Layer process

Evaluation Board for the different Stackup variations of the 0SH Park 4 Layer process

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cod_0207_end

author: Monga
Top
Bottom

2 layer board of 3.56 x 0.73 inches (90.5 x 18.5 mm)
Uploaded: February 07, 2018
Shared: February 07, 2018
Total Price: $12.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ИГГ_ octal driver

author: Muth
Top
Bottom

2 layer board of 1.98 x 1.01 inches (50.3 x 25.6 mm)
Uploaded: February 07, 2018
Shared: February 07, 2018
Total Price: $9.95

Driver for 8 anodes and 8 cathodes for ИГГ1-64x64 'nixie' matrix display. Anodes pulse : up to 400v Cathode select : ground https://hackaday.io/project/46302-1-64x64m-adventure

Driver for 8 anodes and 8 cathodes for ИГГ1-64x64 'nixie' matrix display. Anodes pulse : up to 400v Cathode select : ground https://hackaday.io/project/46302-1-64x64m-adventure

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Vig Compact Plus clock

author: Hopo28
Top
Bottom

2 layer board of 1.91 x 2.47 inches (48.6 x 62.6 mm)
Uploaded: February 07, 2018
Shared: February 07, 2018
Total Price: $23.55

board for connecting an arduino nano, TFT LCD, RTC, power and buttons cable for use in a small clock.

board for connecting an arduino nano, TFT LCD, RTC, power and buttons cable for use in a small clock.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wii U Gamepad Breakout

author: dvdfreitag
Top
Bottom

2 layer board of 2.60 x 1.24 inches (66.1 x 31.5 mm)
Uploaded: February 07, 2018
Shared: February 07, 2018
Total Price: $16.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wii U TS Breakout

author: dvdfreitag
Top
Bottom

2 layer board of 0.73 x 0.41 inches (18.6 x 10.4 mm)
Uploaded: February 06, 2018
Shared: February 07, 2018
Total Price: $1.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WiFi LED controller

author: Yaghn
Top
Bottom

2 layer board of 1.59 x 1.70 inches (40.3 x 43.2 mm)
Uploaded: February 03, 2016
Shared: February 07, 2018
Total Price: $13.45

ESP2866

ESP2866

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LM386 Amp

author: Yaghn
Top
Bottom

2 layer board of 0.97 x 0.75 inches (24.7 x 19.0 mm)
Uploaded: February 07, 2018
Shared: February 07, 2018
Total Price: $3.60

Based on design at https://oshpark.com/shared_projects/gKVOMj5y WIth VCC- Tied to Audio Ground

Based on design at https://oshpark.com/shared_projects/gKVOMj5y WIth VCC- Tied to Audio Ground

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RasKey v1

author: ajlitt
Top
Bottom

2 layer board of 0.83 x 0.34 inches (21.0 x 8.6 mm)
Uploaded: February 06, 2018
Shared: February 06, 2018
Total Price: $1.35

ATECC508A Raspberry Pi 3 backside board

ATECC508A Raspberry Pi 3 backside board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Hot Air Gun V1.0 (SOD123)

author: nppc
Top
Bottom

2 layer board of 1.97 x 0.70 inches (50.0 x 17.8 mm)
Uploaded: February 06, 2018
Shared: February 06, 2018
Total Price: $6.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MP3431 17mm rev 3.2

author: Schoki
Top
Bottom

4 layer board of 0.71 x 0.71 inches (18.0 x 18.0 mm)
Uploaded: February 05, 2018
Shared: February 05, 2018
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

laser_arm

author: facelessloser
Top
Bottom

2 layer board of 0.96 x 1.36 inches (24.4 x 34.6 mm)
Uploaded: January 29, 2018
Shared: February 05, 2018
Total Price: $6.50

pan and tilt servo arm with an laser attached to entertain the dog/cat

Blog post - https://facelesstech.wordpress.com/2018/03/11/laser-arm/ Github - https://github.com/facelessloser/laser_arm Youtube - https://youtu.be/ycYnZCkt5O8

pan and tilt servo arm with an laser attached to entertain the dog/cat

Blog post - https://facelesstech.wordpress.com/2018/03/11/laser-arm/ Github - https://github.com/facelessloser/laser_arm Youtube - https://youtu.be/ycYnZCkt5O8

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

858D Adapter.kicad_pcb

author: cowana
Top
Bottom

2 layer board of 1.00 x 0.60 inches (25.4 x 15.1 mm)
Uploaded: October 31, 2017
Shared: February 05, 2018
Total Price: $2.95

Adapter for a 858D+ hot air station, to replace the S3F94C4EZZ with an ATMEGA168/328.

Adapter for a 858D+ hot air station, to replace the S3F94C4EZZ with an ATMEGA168/328.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NixieSupply5vto160vDCMBoost_Rev2_1804

author: surfncircuits
Top
Bottom

2 layer board of 1.51 x 1.50 inches (38.4 x 38.1 mm)
Uploaded: February 05, 2018
Shared: February 05, 2018
Total Price: $11.30

Nixie Tube power Supply 5v to 170v www.surfncircuits.com

Nixie Tube power Supply 5v to 170v www.surfncircuits.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SGAMP_Interposer.brd

author: Izze-Racing
Top
Bottom

2 layer board of 0.36 x 0.49 inches (9.2 x 12.5 mm)
Uploaded: May 30, 2017
Shared: February 05, 2018
Total Price: $0.85

V1

V1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HASMD8HD15

author: RGB
Top
Bottom

2 layer board of 1.22 x 1.26 inches (31.0 x 32.0 mm)
Uploaded: February 04, 2018
Shared: February 04, 2018
Total Price: $7.65

An 8pin mini DIN to HD-15 (VGA) adapter for use with the HAS V1-V3.1 and the OSSC.

An 8pin mini DIN to HD-15 (VGA) adapter for use with the HAS V1-V3.1 and the OSSC.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PX Reference (v2.3)

author: pepaslabs
Top
Bottom

2 layer board of 1.95 x 1.95 inches (49.6 x 49.6 mm)
Uploaded: February 04, 2018
Shared: February 04, 2018
Total Price: $19.05

An LTZ1000-based 7V reference, based on the circuits of Andreas of the EEVBlog forum.

See http://www.eevblog.com/forum/metrology/px-reference/ and https://github.com/pepaslabs/px-ref/tree/master/kicad/releases/v2.3

An LTZ1000-based 7V reference, based on the circuits of Andreas of the EEVBlog forum.

See http://www.eevblog.com/forum/metrology/px-reference/ and https://github.com/pepaslabs/px-ref/tree/master/kicad/releases/v2.3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy