SMD Challenger Misery Edition
author: MakersBox
2 layer board of 1.27 x 1.27 inches (32.4 x 32.4 mm)
Uploaded:
February 13, 2018
Shared:
February 13, 2018
Total Price:
$8.10
BOM, firmware, and design files at github.com/aspro648/KiCad.
Kits with preloaded firmware available on www.tindie.com.
Project log at [hackaday.io](https://hackaday.io/project…
Show full description
BOM, firmware, and design files at github.com/aspro648/KiCad.
Kits with preloaded firmware available on www.tindie.com.
Project log at [hackaday.io](https://hackaday.io/project…
Show full description
16xPGA_ADC
author: garyStofer
2 layer board of 2.30 x 2.30 inches (58.5 x 58.5 mm)
Uploaded:
June 15, 2017
Shared:
February 13, 2018
Total Price:
$26.45
16x ADC input with PGA for AIR_LCDuino mother board
16x ADC input with PGA for AIR_LCDuino mother board
Lumos Standalone
author: Zombo
2 layer board of 1.00 x 0.76 inches (25.5 x 19.2 mm)
Uploaded:
February 13, 2018
Shared:
February 13, 2018
Total Price:
$3.80
for MSGEQ7 MAX9814 the left side 5v and ground is for the AGC on for the MAX9814, just add a jumper
for MSGEQ7 MAX9814 the left side 5v and ground is for the AGC on for the MAX9814, just add a jumper
FRC Team 3926 MXP Board
author: flamespinner
2 layer board of 3.29 x 2.80 inches (83.5 x 71.1 mm)
Uploaded:
May 14, 2015
Shared:
February 12, 2018
Total Price:
$46.00
MXP board for Robo Rio 2015
MXP board for Robo Rio 2015
FPGA 101 Workshop Badge
author: daveshah
2 layer board of 2.96 x 5.52 inches (75.2 x 140.2 mm)
Uploaded:
February 12, 2018
Shared:
February 12, 2018
Total Price:
$81.60
Add an Upduino 2.0 FPGA board and create the ultimate hackable badge with 3.5" LCD, directional buttons, audio and PMOD for expansion! Based on the iCE40 UP5K FPGA, it's fully compatible with the open source "icestorm" toolchain.
Add an Upduino 2.0 FPGA board and create the ultimate hackable badge with 3.5" LCD, directional buttons, audio and PMOD for expansion! Based on the iCE40 UP5K FPGA, it's fully compatible with the open source "icestorm" toolchain.
badge.kicad_pcb by mmicko for workshop_badge
author: fustini
2 layer board of 2.96 x 5.52 inches (75.2 x 140.2 mm)
Uploaded:
February 12, 2018
Shared:
February 12, 2018
Total Price:
$81.60
mmicko/workshop_badge
- https://github.com/mmicko/workshop_badge/blob/master/badge.kicad_pcb
- [Commit 6e25068](https://github.com/mmicko/workshop_badge/commit/6e250684f4c61…
Show full description
mmicko/workshop_badge
- https://github.com/mmicko/workshop_badge/blob/master/badge.kicad_pcb
- [Commit 6e25068](https://github.com/mmicko/workshop_badge/commit/6e250684f4c61…
Show full description
Breakout Board REV B 555 2
author: MidNite_Doug
4 layer board of 2.16 x 2.83 inches (54.7 x 71.9 mm)
Uploaded:
February 12, 2018
Shared:
February 12, 2018
Total Price:
$61.00
Solar Tripod Bells Arduino Shield.brd
author: jmorri36
2 layer board of 3.91 x 2.11 inches (99.2 x 53.5 mm)
Uploaded:
November 21, 2017
Shared:
February 12, 2018
Total Price:
$41.15
MOSFET control with 6 pin JST output for motor and servo, 3 pin jst input for interrupt pins
MOSFET control with 6 pin JST output for motor and servo, 3 pin jst input for interrupt pins
LED Controller v1,3
author: mquimby
2 layer board of 2.51 x 2.61 inches (63.8 x 66.3 mm)
Uploaded:
February 11, 2018
Shared:
February 11, 2018
Total Price:
$32.80
This board uses an ATTINY85 chip programmed with Arduino to control red, green, and white LEDs. It also current limits both the strobes and landing lights. Version 1.3 adds the ability to hook up a toggle switch to change between two light profiles for the strobe lights. For more info, see http:/…
Show full description
This board uses an ATTINY85 chip programmed with Arduino to control red, green, and white LEDs. It also current limits both the strobes and landing lights. Version 1.3 adds the ability to hook up a toggle switch to change between two light profiles for the strobe lights. For more info, see http:/…
Show full description
Alpha Rotary Diode Board v2
author: Hasty-Labs
2 layer board of 1.04 x 1.00 inches (26.4 x 25.4 mm)
Uploaded:
February 11, 2018
Shared:
February 11, 2018
Total Price:
$5.15
Rotary diode board based on Alpha 1P6T switch SR10010F-0202-(l)ROB-C7-N available from Small Bear Elec. Now includes option for clipping diodes on positions 3 and 4.
Rotary diode board based on Alpha 1P6T switch SR10010F-0202-(l)ROB-C7-N available from Small Bear Elec. Now includes option for clipping diodes on positions 3 and 4.
