Video_Switcher
author: FedorCommander
2 layer board of 1.00 x 0.44 inches (25.4 x 11.2 mm)
Uploaded:
April 05, 2018
Shared:
April 20, 2018
Total Price:
$2.15
4 channel FPV video switcher
https://github.com/fedorcomander/video_switcher/
4 channel FPV video switcher
https://github.com/fedorcomander/video_switcher/
QFN-20 bodge adapter (4x4 - 5x5 mm)
author: none
2 layer board of 0.25 x 0.25 inches (6.4 x 6.4 mm)
Uploaded:
April 19, 2018
Shared:
April 20, 2018
Total Price:
$0.30
- board is 6.35 mm ^2
- untested, lots of DMC violations.
- note the reduced thermal pad - ensure insulation of vias
- board is 6.35 mm ^2
- untested, lots of DMC violations.
- note the reduced thermal pad - ensure insulation of vias
LambdaSpeak 1.95
author: LambdaMikel
2 layer board of 4.21 x 3.11 inches (106.8 x 78.9 mm)
Uploaded:
March 30, 2018
Shared:
April 20, 2018
Total Price:
$65.30
LambdaSpeak 1.95 is a next-generation speech synthesizer for the Amstrad (Schneider) CPC computers (CPC 464, CPC 664, CPC 6128). More details about the project can be found on the project GitHub page.
LambdaSpeak 1.95 is a next-generation speech synthesizer for the Amstrad (Schneider) CPC computers (CPC 464, CPC 664, CPC 6128). More details about the project can be found on the project GitHub page.
apa102-2020-EB-SS-603
author: hiduino
2 layer board of 0.25 x 0.25 inches (6.4 x 6.4 mm)
Uploaded:
April 02, 2018
Shared:
April 19, 2018
Total Price:
$0.30
apa102-2020 wide edge conn side rounded w/dec. cap - 0603 (rxk7Z3Vg)
apa102-2020 wide edge conn side rounded w/dec. cap - 0603 (rxk7Z3Vg)
James R Yaunick
author: JYaunDawg
2 layer board of 3.53 x 1.53 inches (89.6 x 38.8 mm)
Uploaded:
April 19, 2018
Shared:
April 19, 2018
Total Price:
$26.90
This is for a college capstone project. We are receiving analog signals and processing those through an Atmel chip.
This is for a college capstone project. We are receiving analog signals and processing those through an Atmel chip.
Programming_Socket Rev 2
author: KO4XL
2 layer board of 1.79 x 1.35 inches (45.4 x 34.3 mm)
Uploaded:
April 01, 2018
Shared:
April 19, 2018
Total Price:
$12.05
ICSP to ZIF adapter for 8-20 pin DIP ATtinys. Rev 2 has bigger holes for ZIF socket to accommodate "TFXTDOL" knockoffs.
ICSP to ZIF adapter for 8-20 pin DIP ATtinys. Rev 2 has bigger holes for ZIF socket to accommodate "TFXTDOL" knockoffs.
Teensy Serial Ports v2
author: jkinkennon
2 layer board of 1.30 x 2.86 inches (33.0 x 72.7 mm)
Uploaded:
April 19, 2018
Shared:
April 19, 2018
Total Price:
$18.60
Teensy breakout to drive 4 LCDs (serial enabled).
Teensy breakout to drive 4 LCDs (serial enabled).
ProjectMF Blue Box
author: dfroula
2 layer board of 3.27 x 2.75 inches (83.0 x 69.8 mm)
Uploaded:
April 18, 2018
Shared:
April 18, 2018
Total Price:
$44.90
This is the PC board for the ProjectMF PIC 12F683 Phone Phreak blue box that was given away at the HOPE conference by Phil Lapsley. See http://www.projectmf.org for details.
This is the PC board for the ProjectMF PIC 12F683 Phone Phreak blue box that was given away at the HOPE conference by Phil Lapsley. See http://www.projectmf.org for details.
oshpark_trl
4 layer board of 3.31 x 1.31 inches (84.2 x 33.2 mm)
Uploaded:
April 18, 2018
Shared:
April 18, 2018
Total Price:
$43.20
Uses these connectors: https://www.mouser.com/ProductDetail/476-08K80A-40ML5
Uses these connectors: https://www.mouser.com/ProductDetail/476-08K80A-40ML5
Simple Davis v3 Interface
author: zlaa303
2 layer board of 0.99 x 0.87 inches (25.0 x 22.0 mm)
Uploaded:
April 18, 2018
Shared:
April 18, 2018
Total Price:
$4.25
Simple(st) and cheap(est) interface for Davis Vantage Vue with v3 software (infamous green dot). Tested with Vantage Vue, should work with other stations too.
IC1 = ATTiny85 with program from : http://meteo.annoyingdesigns.com/DavisSPI.pdf
C1 = 100n (optional)
D1 = 3v3 Zener (optional) …
Show full description
Simple(st) and cheap(est) interface for Davis Vantage Vue with v3 software (infamous green dot). Tested with Vantage Vue, should work with other stations too.
IC1 = ATTiny85 with program from : http://meteo.annoyingdesigns.com/DavisSPI.pdf
C1 = 100n (optional)
D1 = 3v3 Zener (optional) …
Show full description
RaspberryPiZero-PWM-sound
author: 32teeth
2 layer board of 0.64 x 0.89 inches (16.3 x 22.5 mm)
Uploaded:
March 02, 2018
Shared:
April 18, 2018
Total Price:
$2.80
Description Pretty much what the title says. This is a 16.25mm x 22.5mm board for PWM sound to a 3.5mm jack.
Description Pretty much what the title says. This is a 16.25mm x 22.5mm board for PWM sound to a 3.5mm jack.
TMC2130 SPI
author: TWD
2 layer board of 2.17 x 1.09 inches (55.2 x 27.8 mm)
Uploaded:
April 18, 2018
Shared:
April 18, 2018
Total Price:
$11.85
TMC2130 Breakout Board with SPI For Trinamic TMC2130. Solder free way to connect your 4 or 5 stepper drivers.
TMC2130 Breakout Board with SPI For Trinamic TMC2130. Solder free way to connect your 4 or 5 stepper drivers.