Shared Projects

Shared Projects

analog-multiplexer-8x8.kicad_pcb

author: EllisGL
Top
Bottom

2 layer board of 2.39 x 3.66 inches (60.7 x 92.9 mm)
Uploaded: May 29, 2018
Shared: May 29, 2018
Total Price: $43.70

8x8 Analog Multiplexer (74xx4051) - https://github.com/ellisgl/analog-multiplexer-8x8

8x8 Analog Multiplexer (74xx4051) - https://github.com/ellisgl/analog-multiplexer-8x8

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OAT Voltage Monitor

author: ThadLarson
Top
Bottom

2 layer board of 2.73 x 1.31 inches (69.2 x 33.2 mm)
Uploaded: May 28, 2018
Shared: May 29, 2018
Total Price: $17.80

DO NOT USE!!! EXPOSED GOLD SHORTS ALL U1 PINS TOGETHER

OAT Voltage Monitor

  • C1 - C0805C104K1RACTU
  • D1,D2 - 1N4001-T
  • K1 - EC2-12NU
  • P1,P3 - OSTTC022162
  • P2 - 282834-2
  • R1,R22 - RNMF14FTC820K
  • R3 - RNMF14FTC91K0
  • R4 - 3362P-1-203LF
  • U1 - C33072APG
  • U2 - MEV1S1515SC

DO NOT USE!!! EXPOSED GOLD SHORTS ALL U1 PINS TOGETHER

OAT Voltage Monitor

  • C1 - C0805C104K1RACTU
  • D1,D2 - 1N4001-T
  • K1 - EC2-12NU
  • P1,P3 - OSTTC022162
  • P2 - 282834-2
  • R1,R22 - RNMF14FTC820K
  • R3 - RNMF14FTC91K0
  • R4 - 3362P-1-203LF
  • U1 - C33072APG
  • U2 - MEV1S1515SC
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

apu_shield

author: Godzil
Top
Bottom

2 layer board of 3.91 x 2.22 inches (99.2 x 56.4 mm)
Uploaded: May 29, 2018
Shared: May 29, 2018
Total Price: $43.30

Board from http://caitsith2.com/snes/apu.htm

Board from http://caitsith2.com/snes/apu.htm

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PS2 IDE to IDE adapter

author: avfusion
Top
Bottom

2 layer board of 0.78 x 2.32 inches (19.7 x 58.8 mm)
Uploaded: February 19, 2018
Shared: May 29, 2018
Total Price: $8.95

Converts the PS/2 Model 25 and Model 30 weird IDE to standard IDE.

Converts the PS/2 Model 25 and Model 30 weird IDE to standard IDE.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Filter

author: Gracana
Top
Bottom

2 layer board of 2.51 x 0.51 inches (63.6 x 12.8 mm)
Uploaded: May 28, 2018
Shared: May 28, 2018
Total Price: $6.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TP4056 Micro LiPo Charger

author: mzst
Top
Bottom

2 layer board of 0.41 x 0.57 inches (10.4 x 14.4 mm)
Uploaded: May 28, 2018
Shared: May 28, 2018
Total Price: $1.15

TP4056 Micro LiPo Charger

TP4056 Micro LiPo Charger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NRFMan RevA

author: dparson
Top
Bottom

2 layer board of 3.36 x 1.40 inches (85.4 x 35.6 mm)
Uploaded: May 26, 2018
Shared: May 28, 2018
Total Price: $23.50

Battery-powered Arduino compatible control station. This general-purpose device is meant for productivity and wireless control of remote units such as NRFBoyLED. It consumes < 2uA when not in use and < 30mA when in use, so a small 500mAh lipo batt…

Show full description

Battery-powered Arduino compatible control station. This general-purpose device is meant for productivity and wireless control of remote units such as NRFBoyLED. It consumes < 2uA when not in use and < 30mA when in use, so a small 500mAh lipo batt…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sensebender Micro

author: alexsh1
Top
Bottom

2 layer board of 0.70 x 1.20 inches (17.7 x 30.5 mm)
Uploaded: May 27, 2018
Shared: May 27, 2018
Total Price: $4.15

Please see https://www.openhardware.io/view/1/Sensebender-Micro

Please see https://www.openhardware.io/view/1/Sensebender-Micro

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dashlcd/2

author: urjaman
Top
Bottom

2 layer board of 1.11 x 1.08 inches (28.1 x 27.5 mm)
Uploaded: May 28, 2017
Shared: May 27, 2018
Total Price: $5.95

an oled thing, obviously, again.

an oled thing, obviously, again.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP-01_Adapter_R

author: KO4XL
Top
Bottom

2 layer board of 1.54 x 0.80 inches (39.1 x 20.3 mm)
Uploaded: May 27, 2018
Shared: May 27, 2018
Total Price: $6.15

Breadboard-friendly adapter for ESP-01 with 3.3v regulator and 5v level shifters for Tx, Rx, GPIO0 and GPIO2.

Regulator - LD1117 SOT223
MOSFETs - 2N7002
All Resistors - 10k 0805
C1 - 100n 0805
C2 - 10uf 0805

ESP-01 mounts OVER adapter board.

Breadboard-friendly adapter for ESP-01 with 3.3v regulator and 5v level shifters for Tx, Rx, GPIO0 and GPIO2.

Regulator - LD1117 SOT223
MOSFETs - 2N7002
All Resistors - 10k 0805
C1 - 100n 0805
C2 - 10uf 0805

ESP-01 mounts OVER adapter board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP-01_Adapter

author: KO4XL
Top
Bottom

2 layer board of 1.54 x 0.80 inches (39.1 x 20.3 mm)
Uploaded: May 27, 2018
Shared: May 27, 2018
Total Price: $6.15

Breadboard-friendly adapter for ESP-01 with 3.3v regulator and 5v level shifters for Tx, Rx, GPIO0 and GPIO2.

Regulator - LD1117 SOT223
MOSFETs - 2N7002
All Resistors - 10k 0805
C1 - 100n 0805
C2 - 10uf 0805

ESP-01 mounts pointing AWAY from board.

Breadboard-friendly adapter for ESP-01 with 3.3v regulator and 5v level shifters for Tx, Rx, GPIO0 and GPIO2.

Regulator - LD1117 SOT223
MOSFETs - 2N7002
All Resistors - 10k 0805
C1 - 100n 0805
C2 - 10uf 0805

ESP-01 mounts pointing AWAY from board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino Bootcamp for Teachers miniprojects v2

author: Tech_Explorations
Top
Bottom

2 layer board of 2.71 x 2.11 inches (68.9 x 53.7 mm)
Uploaded: April 24, 2018
Shared: May 27, 2018
Total Price: $28.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TE Environment Monitor Shield

author: Tech_Explorations
Top
Bottom

2 layer board of 3.24 x 2.10 inches (82.2 x 53.4 mm)
Uploaded: April 25, 2018
Shared: May 27, 2018
Total Price: $34.00

This shield is used in Tech Explorations "Make an Environment Monitor Gadget" and "Kicad Like a Pro" courses.

This shield is used in Tech Explorations "Make an Environment Monitor Gadget" and "Kicad Like a Pro" courses.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CAN splitter boards with power, ground, CAN H, CAN L, and Shield

author: jeremy-daily
Top
Bottom

2 layer board of 2.12 x 0.96 inches (53.7 x 24.3 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $10.05

Uses Molex Mini-fit Jr. Connectors for a quick connection to build CAN networks fast for teaching with 1 power supply. Part numbers are printed on the silkscreen. Brought to you by the University of Tulsa's Student CyberTruck Experience.

Uses Molex Mini-fit Jr. Connectors for a quick connection to build CAN networks fast for teaching with 1 power supply. Part numbers are printed on the silkscreen. Brought to you by the University of Tulsa's Student CyberTruck Experience.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LambdaSpeak 1.99

author: LambdaMikel
Top
Bottom

2 layer board of 4.51 x 4.21 inches (114.4 x 106.8 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $94.75

The next-generation speech synthesizer for the Amstrad / Schneider CPC line of computers.

<https://github.com/lambdamikel/LambdaSpeak>

This version supports the GI SPO256-AL2 retro speech chip, in addition to the TextToSpeech click board. The SPO256-AL2 makes LambdaSpeak a 100% compatible …

Show full description

The next-generation speech synthesizer for the Amstrad / Schneider CPC line of computers.

<https://github.com/lambdamikel/LambdaSpeak>

This version supports the GI SPO256-AL2 retro speech chip, in addition to the TextToSpeech click board. The SPO256-AL2 makes LambdaSpeak a 100% compatible …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

10 pin breakout.zip

author: BertHoogenboom
Top
Bottom

2 layer board of 0.61 x 0.51 inches (15.4 x 12.8 mm)
Uploaded: July 14, 2017
Shared: May 26, 2018
Total Price: $1.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TruckCape for Hammond 1455K - Rev3 - May 2018

author: jeremy-daily
Top
Bottom

2 layer board of 2.96 x 4.73 inches (75.1 x 120.2 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $69.95

Heavy Vehicle Cape at the University of Tulsa. Has 2 CAN and 2 J1708 Channels for the Beagle Bone Black.

https://github.com/Heavy-Vehicle-Networking-At-U-Tulsa/TruckCapeProjects

Heavy Vehicle Cape at the University of Tulsa. Has 2 CAN and 2 J1708 Channels for the Beagle Bone Black.

https://github.com/Heavy-Vehicle-Networking-At-U-Tulsa/TruckCapeProjects

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CCS811BME280BoB.v01a

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.41 inches (17.9 x 10.3 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $2.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SatNOGS Rotary Encoder AS5601

author: pierros
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.6 x 25.6 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $5.05

Rotary encoder for SatNOGS rotator.

It is based on AS5601 magnetic encoder.

Wiki page: https://wiki.satnogs.org/SatNOGS_Rotator_Controller#Encoders

Repository: https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller-encoder/ (tag v1.0)

Rotary encoder for SatNOGS rotator.

It is based on AS5601 magnetic encoder.

Wiki page: https://wiki.satnogs.org/SatNOGS_Rotator_Controller#Encoders

Repository: https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller-encoder/ (tag v1.0)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mdbt50_clone

author: arturo182
Top
Bottom

4 layer board of 0.42 x 0.62 inches (10.7 x 15.7 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $2.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy