swd-blaster.kicad_pcb
2 layer board of 0.50 x 0.88 inches (12.7 x 22.2 mm)
Uploaded:
August 28, 2024
Shared:
October 05, 2024
Total Price:
$2.15
This design adapts the 10 pin 50 mil picth JTAG header pinout used by Arm to the 10 pin 100 mil pitch header pinout used by Altera for their Blasters. It works great with the Tigard board and [openFPGALoader](https://github.com/trabucayre/openFPGA…
Show full description
This design adapts the 10 pin 50 mil picth JTAG header pinout used by Arm to the 10 pin 100 mil pitch header pinout used by Altera for their Blasters. It works great with the Tigard board and [openFPGALoader](https://github.com/trabucayre/openFPGA…
Show full description
Pico Dirty Blaster - Through Hole
2 layer board of 0.50 x 0.60 inches (12.7 x 15.2 mm)
Uploaded:
March 04, 2024
Shared:
June 01, 2024
Total Price:
$1.50
Through Hole version of the Pico Dirty Blaster This is a sidecar for the Raspberry Pi Pico board to add an Altera "Blaster" connector for use with Pico DirtyJTAG or Pico UF2 JBC Player
Through Hole version of the Pico Dirty Blaster This is a sidecar for the Raspberry Pi Pico board to add an Altera "Blaster" connector for use with Pico DirtyJTAG or Pico UF2 JBC Player
B4 Handy
2 layer board of 3.50 x 2.00 inches (88.9 x 50.8 mm)
Uploaded:
May 26, 2024
Shared:
May 26, 2024
Total Price:
$35.00
This is beeping, blinking, business-card/badge designed for hand assembly.
This is beeping, blinking, business-card/badge designed for hand assembly.
nfcwchsao.kicad_pcb
2 layer board of 1.35 x 1.90 inches (34.3 x 48.3 mm)
Uploaded:
January 01, 2024
Shared:
May 13, 2024
Total Price:
$12.80
Beeping Blinking Badge Buddy
This board has an engergy harvesting NFC EEPROM and WCH CH32V003 MCU.
The MCU is connected to an RGB LED and piezo buzzer.
The two ICs are 8 pin SOIC, and the passives are 0603 so it is not too dificult to hand assemble, except for the RGB LED that is a little fine …
Show full description
Beeping Blinking Badge Buddy
This board has an engergy harvesting NFC EEPROM and WCH CH32V003 MCU.
The MCU is connected to an RGB LED and piezo buzzer.
The two ICs are 8 pin SOIC, and the passives are 0603 so it is not too dificult to hand assemble, except for the RGB LED that is a little fine …
Show full description
bidirisns
2 layer board of 0.58 x 0.40 inches (14.7 x 10.2 mm)
Uploaded:
November 02, 2020
Shared:
November 10, 2020
Total Price:
$1.15
Bi-directional current sense amp Back side pads for right angle headers or dual row SMT header Design files Hackaday Project
Bi-directional current sense amp Back side pads for right angle headers or dual row SMT header Design files Hackaday Project
