A2000 to A500 "Trapdoor" Adapter
4 layer board of 2.84 x 2.14 inches (72.0 x 54.2 mm)
Uploaded:
October 17th 2019
Shared:
October 17th 2019
Total Price:
$60.50
Allows the use of Amiga 500 Compatible "Trapdoor" Expansions in an Amiga 2000. There is an associated CIAB and GARY board that is also part of this.
Allows the use of Amiga 500 Compatible "Trapdoor" Expansions in an Amiga 2000. There is an associated CIAB and GARY board that is also part of this.
GARY Adapter Board
2 layer board of 0.94 x 2.71 inches (23.8 x 68.9 mm)
Uploaded:
October 17th 2019
Shared:
October 17th 2019
Total Price:
$12.65
This is the GARY Adapter board to the Amiga 2000 to Amiga 500 "Trapdoor" Expansion project.
This is the GARY Adapter board to the Amiga 2000 to Amiga 500 "Trapdoor" Expansion project.
CIAB Adapter Board
2 layer board of 0.91 x 2.26 inches (23.1 x 57.4 mm)
Uploaded:
October 17th 2019
Shared:
October 17th 2019
Total Price:
$10.25
This is the CIA-B Adapter board for the Amiga 2000 to Amiga 500 "Trapdoor" Expansion project.
This is the CIA-B Adapter board for the Amiga 2000 to Amiga 500 "Trapdoor" Expansion project.
DENISE180
2 layer board of 1.20 x 2.48 inches (30.5 x 63.0 mm)
Uploaded:
June 7th 2019
Shared:
June 7th 2019
Total Price:
$14.85
Rotates the pin-out of Denise to allow Denise-based socket frame buffers and flicker fixers to fit within the Amiga 1000. This has been tested and works very well.
Rotates the pin-out of Denise to allow Denise-based socket frame buffers and flicker fixers to fit within the Amiga 1000. This has been tested and works very well.
Amiga ULTRASOUND I
2 layer board of 0.88 x 2.65 inches (22.4 x 67.2 mm)
Uploaded:
May 11th 2018
Shared:
November 22nd 2018
Total Price:
$11.65
Adds an XMC1400 to the Amiga which can be reprogrammed thru the Amiga serial port. This sits in the Paula socket and proxies the Amiga’s audio and serial outputs allowing software emulation of various sound chips and serial with much higher baud rates. Note that this does not REPLACE Paula.
Adds an XMC1400 to the Amiga which can be reprogrammed thru the Amiga serial port. This sits in the Paula socket and proxies the Amiga’s audio and serial outputs allowing software emulation of various sound chips and serial with much higher baud rates. Note that this does not REPLACE Paula.
