Shared Projects

Shared Projects

IN-18 One Tube Clock adapter

author: judge2005
Top
Bottom

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $19.45

IN-18 One Tube Clock adapter for my One Tube Nixie Clock. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a 'socket'. These are often listed on eBay as '[1mm tube socket pins](https://www.ebay.c…

Show full description

IN-18 One Tube Clock adapter for my One Tube Nixie Clock. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a 'socket'. These are often listed on eBay as '[1mm tube socket pins](https://www.ebay.c…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

B13B One Tube Clock Nixie tube adapter

author: judge2005
Top
Bottom

2 layer board of 0.95 x 1.32 inches (24.2 x 33.6 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $6.25

This One Tube Nixie Clock adapter is for any top-view tube that uses a B13B socket. This includes ZM1020, HB-106, B6844A, B6091, B5092, GN3, GN4, etc. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pi…

Show full description

This One Tube Nixie Clock adapter is for any top-view tube that uses a B13B socket. This includes ZM1020, HB-106, B6844A, B6091, B5092, GN3, GN4, etc. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SK-116 One Tube Clock Nixie tube adapter.

author: judge2005
Top
Bottom

2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm)
Uploaded: May 26, 2018
Shared: May 26, 2018
Total Price: $19.45

This One Tube Nixie Clock adapter is for any side-view tube that uses a SK-116 socket. This includes GN-6A, GN-13A, XN-3, XN-13, etc. These tubes have flying leads. This board is intended to use individual Mill-Max 0665-0-15-15-30-27-10-0 sockets f…

Show full description

This One Tube Nixie Clock adapter is for any side-view tube that uses a SK-116 socket. This includes GN-6A, GN-13A, XN-3, XN-13, etc. These tubes have flying leads. This board is intended to use individual Mill-Max 0665-0-15-15-30-27-10-0 sockets f…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IKA pad - Load Cell Full Bridge 1.0

author: evq
Top
Bottom

2 layer board of 1.30 x 0.85 inches (33.1 x 21.7 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $5.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FreeStation_RJ45Shield5.10

author: FreeStation
Top
Bottom

2 layer board of 1.19 x 0.95 inches (30.2 x 24.2 mm)
Uploaded: May 14, 2018
Shared: May 25, 2018
Total Price: $5.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FreeStation_RJ11Shield5.10

author: FreeStation
Top
Bottom

2 layer board of 1.19 x 0.99 inches (30.2 x 25.2 mm)
Uploaded: May 14, 2018
Shared: May 25, 2018
Total Price: $5.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266_RGB_Matrix_Rev1.1

author: miker
Top
Bottom

2 layer board of 2.61 x 2.04 inches (66.3 x 51.8 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $26.60

This design controls various sizes of RGB Led Matrix displays using an ESP8266 and the Arduino IDE. A great tutorial for getting it up and running is at: http://www.instructables.com/id/RGB-LED-Matrix-With-an-ESP8266/ The Arduino library is at: https://github.com/2dom/PxMatrix

This design controls various sizes of RGB Led Matrix displays using an ESP8266 and the Arduino IDE. A great tutorial for getting it up and running is at: http://www.instructables.com/id/RGB-LED-Matrix-With-an-ESP8266/ The Arduino library is at: https://github.com/2dom/PxMatrix

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_wing_20180525122930

author: loans
Top
Bottom

2 layer board of 2.63 x 1.00 inches (66.7 x 25.4 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $13.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi Zero Shield

author: pintotheburninator
Top
Bottom

2 layer board of 2.97 x 2.23 inches (75.4 x 56.6 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $33.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RelayPCB_SMD_2_Gerber

author: hamamoto5
Top
Bottom

2 layer board of 1.54 x 1.18 inches (39.1 x 29.9 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $9.00

PCB for FMC Transient Generator, Surface Mount Version

PCB for FMC Transient Generator, Surface Mount Version

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi1541 IO Adapter, Rev.1

author: hackup.net
Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $28.30

This is an IO adapter board for the Raspberry Pi 3 based on the awesome Pi1541 project. It is currently very much work in progress. A prototype batch of the first revision has been manufactured and is [being tested](https://www.hackup.net/2018/05/pi1541-io-…

Show full description

This is an IO adapter board for the Raspberry Pi 3 based on the awesome Pi1541 project. It is currently very much work in progress. A prototype batch of the first revision has been manufactured and is [being tested](https://www.hackup.net/2018/05/pi1541-io-…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

millivoltmeter

author: tardate
Top
Bottom

2 layer board of 2.89 x 1.50 inches (73.4 x 38.2 mm)
Uploaded: January 21, 2018
Shared: May 25, 2018
Total Price: $21.70

An ATmega328-based millivolt meter based on a design by Scullcom Hobby Electronics. Uses an LTC2400 ADC and LT1019 voltage reference.

I have fabricated the board at OSHPark, built and tested it - all OK! There are a few changes I'd make to the PCB if I did this again - mainly concerning more c…

Show full description

An ATmega328-based millivolt meter based on a design by Scullcom Hobby Electronics. Uses an LTC2400 ADC and LT1019 voltage reference.

I have fabricated the board at OSHPark, built and tested it - all OK! There are a few changes I'd make to the PCB if I did this again - mainly concerning more c…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Trixel Led Mini Panel V01

author: Arkadi_Raf
Top
Bottom

2 layer board of 2.57 x 2.57 inches (65.3 x 65.3 mm)
Uploaded: April 19, 2018
Shared: May 25, 2018
Total Price: $33.00

Mini panel for the Trixel Led project: https://hackaday.io/project/20510-trixel-led

Mini panel for the Trixel Led project: https://hackaday.io/project/20510-trixel-led

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

charger2s/2018-05

author: jaw
Top
Bottom

2 layer board of 2.03 x 0.47 inches (51.5 x 12.0 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $4.75

charger2s/2018-05

charger2s/2018-05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

hallows_revE

author: ronp5683
Top
Bottom

2 layer board of 2.50 x 2.15 inches (63.4 x 54.5 mm)
Uploaded: May 25, 2018
Shared: May 25, 2018
Total Price: $26.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OptoLEDboard.kicad_pcb

author: anekimken
Top
Bottom

2 layer board of 2.28 x 2.12 inches (57.8 x 53.8 mm)
Uploaded: May 21, 2018
Shared: May 24, 2018
Total Price: $24.05

V2 with pins on barrel jack corrected.

V2 with pins on barrel jack corrected.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CapCircuitGerber

author: hamamoto5
Top
Bottom

2 layer board of 1.12 x 1.56 inches (28.4 x 39.6 mm)
Uploaded: May 24, 2018
Shared: May 24, 2018
Total Price: $8.70

PCB for capacitor for FMC transient generator

PCB for capacitor for FMC transient generator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RelayPCBTH_2_Gerber

author: hamamoto5
Top
Bottom

2 layer board of 1.25 x 1.21 inches (31.6 x 30.6 mm)
Uploaded: May 24, 2018
Shared: May 24, 2018
Total Price: $7.50

PCB for diode and transistor for FMC transient generator, through hole version

PCB for diode and transistor for FMC transient generator, through hole version

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

l432_bobv0.1

author: emeb
Top
Bottom

2 layer board of 0.85 x 1.46 inches (21.5 x 37.0 mm)
Uploaded: October 16, 2017
Shared: May 24, 2018
Total Price: $6.15

STM32L432KC breakout board

More details here: <http://ebrombaugh.studionebula.com/embedded/stm32l432breakout/index.html>

STM32L432KC breakout board

More details here: <http://ebrombaugh.studionebula.com/embedded/stm32l432breakout/index.html>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266 WiFi Weather Sensor (Ver. 3)

author: MalteP
Top
Bottom

2 layer board of 1.19 x 1.64 inches (30.2 x 41.6 mm)
Uploaded: October 23, 2017
Shared: May 24, 2018
Total Price: $9.70

IoT WiFi Temperature, humidity and barometric pressure sensor with battery voltage monitoring

This updated v3 board features SHT35 temperature / humidity sensor and a Molex Picoblade 1.25mm connector for external sensors.

[https://github.com/MalteP/espweather](https://github.com/MalteP/…

Show full description

IoT WiFi Temperature, humidity and barometric pressure sensor with battery voltage monitoring

This updated v3 board features SHT35 temperature / humidity sensor and a Molex Picoblade 1.25mm connector for external sensors.

[https://github.com/MalteP/espweather](https://github.com/MalteP/…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy