Shared Projects

Shared Projects

ogx360

author: Ryzee119
Top
Bottom

2 layer board of 3.83 x 1.44 inches (97.2 x 36.5 mm)
Uploaded: December 03, 2018
Shared: December 03, 2018
Total Price: $27.50

Xbox 360 Controller to Original Xbox Adaptor

Xbox 360 Controller to Original Xbox Adaptor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

T-962-1.1

author: aaronw
Top
Bottom

2 layer board of 1.58 x 1.78 inches (40.2 x 45.2 mm)
Uploaded: December 03, 2018
Shared: December 03, 2018
Total Price: $14.05

Board to fix and enhance T-961 Reflow Ovens This board provides the following features:

  • USB to serial interface
  • buttons needed to load the Unified Engineering firmware
  • Accurate K-type temperature sensors with up to 4 sensors
  • PWM support for the fan
  • 3V output
  • 12V output

The…

Show full description

Board to fix and enhance T-961 Reflow Ovens This board provides the following features:

  • USB to serial interface
  • buttons needed to load the Unified Engineering firmware
  • Accurate K-type temperature sensors with up to 4 sensors
  • PWM support for the fan
  • 3V output
  • 12V output

The…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GC Micro SD

author: jskyboo
Top
Bottom

2 layer board of 0.71 x 1.33 inches (18.0 x 33.8 mm)
Uploaded: November 08, 2018
Shared: December 03, 2018
Total Price: $4.70

BOM:

  • J1: 1-1734592-2
  • J2: DM3AT-SF-PEJM5
  • 3x 68.1K Resistor 0603
  • 6x 22.1 Resistor 0603
  • 1x 470K Resistor 0603
  • 1x 15K Resistor 0603
  • 1x 1u Ceramic Cap 0603
  • 1x 10u Ceramic Cap 0603

BOM:

  • J1: 1-1734592-2
  • J2: DM3AT-SF-PEJM5
  • 3x 68.1K Resistor 0603
  • 6x 22.1 Resistor 0603
  • 1x 470K Resistor 0603
  • 1x 15K Resistor 0603
  • 1x 1u Ceramic Cap 0603
  • 1x 10u Ceramic Cap 0603
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GC digital audio

author: jskyboo
Top
Bottom

2 layer board of 1.06 x 0.47 inches (26.8 x 11.9 mm)
Uploaded: November 02, 2018
Shared: December 03, 2018
Total Price: $2.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CAN2Ethernet-Rev1

author: jeremy-daily
Top
Bottom

2 layer board of 2.96 x 4.73 inches (75.2 x 120.2 mm)
Uploaded: December 03, 2018
Shared: December 03, 2018
Total Price: $70.00

A Teensy 3 based project to bridge Controller Area Networks to Ethernet or Wifi. Also includes PWM outputs and high current low side drivers. Mostly through hole parts. Fits Hammond 1455K enclosure.

A Teensy 3 based project to bridge Controller Area Networks to Ethernet or Wifi. Also includes PWM outputs and high current low side drivers. Mostly through hole parts. Fits Hammond 1455K enclosure.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESATA Mount

author: jskyboo
Top
Bottom

2 layer board of 1.43 x 0.43 inches (36.2 x 10.8 mm)
Uploaded: December 02, 2018
Shared: December 02, 2018
Total Price: $3.00

Hardware:

  • 2x 3mm x 10mm machine screw
  • 2x 3mm washer
  • 2x 3mm hex nuts

Used with: https://oshpark.com/shared_projects/eoyYflEJ

Hardware:

  • 2x 3mm x 10mm machine screw
  • 2x 3mm washer
  • 2x 3mm hex nuts

Used with: https://oshpark.com/shared_projects/eoyYflEJ

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WirelessDS18B20v2.0.kicad_pcb

author: Domochip
Top
Bottom

2 layer board of 1.05 x 1.06 inches (26.8 x 27.0 mm)
Uploaded: December 02, 2018
Shared: December 02, 2018
Total Price: $5.60

D1 Mini Hat for DS18B20 bus

D1 Mini Hat for DS18B20 bus

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WirelessTeleInfo v2.0

author: Domochip
Top
Bottom

2 layer board of 1.05 x 1.06 inches (26.8 x 27.0 mm)
Uploaded: December 02, 2018
Shared: December 02, 2018
Total Price: $5.60

Hat pour D1 Mini permettant de récupérer les trame Téléinfo des compteur EDF Français

Hat pour D1 Mini permettant de récupérer les trame Téléinfo des compteur EDF Français

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DP2USBC v4

author: carl
Top
Bottom

2 layer board of 3.36 x 1.18 inches (85.3 x 30.0 mm)
Uploaded: October 16, 2017
Shared: December 02, 2018
Total Price: $19.80

DisplayPort to USB-C carrier

Project description here.

DisplayPort to USB-C carrier

Project description here.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pi_serial

author: facelessloser
Top
Bottom

2 layer board of 0.62 x 0.36 inches (15.6 x 9.0 mm)
Uploaded: April 01, 2018
Shared: December 02, 2018
Total Price: $1.05

A very simple board to interface a CP2102 serial board with the RPI serial pins VCC and GND

Blog post - https://facelesstech.wordpress.com/2018/05/27/pi-serial-adaptor/ Youtube - https://www.youtube.com/watch?v=9MWLeJiROqw

A very simple board to interface a CP2102 serial board with the RPI serial pins VCC and GND

Blog post - https://facelesstech.wordpress.com/2018/05/27/pi-serial-adaptor/ Youtube - https://www.youtube.com/watch?v=9MWLeJiROqw

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

zero_boot_screen

author: facelessloser
Top
Bottom

2 layer board of 2.51 x 0.56 inches (63.6 x 14.2 mm)
Uploaded: September 04, 2018
Shared: December 02, 2018
Total Price: $6.95

Its a raspberry pi platform Ive made to help me build other projects on

Blog post - https://facelesstech.wordpress.com/2018/11/05/pi-boot-system/ Youtube - https://www.youtube.com/watch?v=CKD1gWXzSro

Its a raspberry pi platform Ive made to help me build other projects on

Blog post - https://facelesstech.wordpress.com/2018/11/05/pi-boot-system/ Youtube - https://www.youtube.com/watch?v=CKD1gWXzSro

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

new_2.4"_screen_breakout

author: facelessloser
Top
Bottom

2 layer board of 0.82 x 0.65 inches (20.8 x 16.4 mm)
Uploaded: October 23, 2018
Shared: December 02, 2018
Total Price: $2.65

Breakout for a ili9341 screen with 18 pin ribbon cable. Its a 0.8mm pitch on the ribbon cable

Blog post - https://facelesstech.wordpress.com/2018/12/02/xmas-bauble-pi/ Youtube - https://www.youtube.com/watch?v=6JN_Shpx8XM

Breakout for a ili9341 screen with 18 pin ribbon cable. Its a 0.8mm pitch on the ribbon cable

Blog post - https://facelesstech.wordpress.com/2018/12/02/xmas-bauble-pi/ Youtube - https://www.youtube.com/watch?v=6JN_Shpx8XM

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MD-90SM-breakout-kicad-master

author: retrorgb
Top
Bottom

2 layer board of 0.83 x 0.58 inches (21.1 x 14.8 mm)
Uploaded: September 04, 2018
Shared: December 02, 2018
Total Price: $2.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breadboard Power Supply v1

author: FK
Top
Bottom

2 layer board of 2.31 x 2.11 inches (58.7 x 53.6 mm)
Uploaded: November 11, 2018
Shared: December 01, 2018
Total Price: $24.35

Breadboard Power Supply with a selectable voltage regulated to either 3.3Volts or 5Volts.

Breadboard Power Supply with a selectable voltage regulated to either 3.3Volts or 5Volts.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi adapter board for Sparkfun MPU 9250 IMU

author: zlite
Top
Bottom

2 layer board of 1.20 x 0.61 inches (30.4 x 15.4 mm)
Uploaded: November 18, 2018
Shared: December 01, 2018
Total Price: $3.60

Handles all the connection to mount a Sparkfun 9250 IMU breakout board on a Raspberry Pi

https://www.sparkfun.com/products/13762

Handles all the connection to mount a Sparkfun 9250 IMU breakout board on a Raspberry Pi

https://www.sparkfun.com/products/13762

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi adapter board for Adafruit BNO055 IMU

author: zlite
Top
Bottom

2 layer board of 1.20 x 2.18 inches (30.4 x 55.4 mm)
Uploaded: November 20, 2018
Shared: December 01, 2018
Total Price: $13.05

Handles all the RaspberryPi connections for this board: https://www.adafruit.com/product/2472?gclid=Cj0KCQiA_4jgBRDhARIsADezXcjvzWy5oe37MvAUFRAyu8BCChP9UCu90U4poXwjzxrDP9sNc0gOw1EaAh-_EALw_wcB

Handles all the RaspberryPi connections for this board: https://www.adafruit.com/product/2472?gclid=Cj0KCQiA_4jgBRDhARIsADezXcjvzWy5oe37MvAUFRAyu8BCChP9UCu90U4poXwjzxrDP9sNc0gOw1EaAh-_EALw_wcB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USBOTGMICROTOB

author: A-Wynn
Top
Bottom

2 layer board of 1.51 x 0.71 inches (38.4 x 18.0 mm)
Uploaded: March 14, 2018
Shared: November 30, 2018
Total Price: $5.35

An adapter board to use Seek thermal camera on PC with this software: http://joe-c.de/pages/projekte/thermovision.php See https://www.eevblog.com/forum/thermal-imaging/freeware-software-for-thermal-analysis-thermovision_joec/

J1 is Molex 105017-0001 and J2 is Amphenol 61729-0010BLF connector…

Show full description

An adapter board to use Seek thermal camera on PC with this software: http://joe-c.de/pages/projekte/thermovision.php See https://www.eevblog.com/forum/thermal-imaging/freeware-software-for-thermal-analysis-thermovision_joec/

J1 is Molex 105017-0001 and J2 is Amphenol 61729-0010BLF connector…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OMSI - Shakehouse Accelerometer i2c Extender

author: hydronics
Top
Bottom

2 layer board of 3.51 x 1.66 inches (89.2 x 42.2 mm)
Uploaded: November 30, 2018
Shared: November 30, 2018
Total Price: $29.10

Hackaday.io description
This breakout board uses the following components:
mm8451 Adafruit Accelerometer
PCA9615 i2c Extender
Hackaday.io description
This breakout board uses the following components:
mm8451 Adafruit Accelerometer
PCA9615 i2c Extender
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GCH Flip Lantern

author: gchart
Top
Bottom

2 layer board of 1.89 x 1.89 inches (48.0 x 48.0 mm)
Uploaded: September 11, 2018
Shared: November 30, 2018
Total Price: $17.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Current Detector V1.2

author: JohnCH
Top
Bottom

2 layer board of 1.99 x 1.00 inches (50.5 x 25.4 mm)
Uploaded: March 25, 2014
Shared: November 30, 2018
Total Price: $9.90

MR Detector

MR Detector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy